component/bt: support BLE Authorization

components/bt/host/bluedroid/api/esp_gap_ble_api.c

@@ -717,6 +717,13 @@ esp_err_t esp_ble_get_current_conn_params(esp_bd_addr_t bd_addr, esp_gap_conn_pa
     return ESP_ERR_NOT_FOUND;
 }
 
-
+esp_err_t esp_gap_ble_set_authorization(esp_bd_addr_t bd_addr, bool authorize)
-
+{
-
+    if (!bd_addr) {
+        return ESP_ERR_INVALID_ARG;
+    }
+    if (BTM_Ble_Authorization(bd_addr, authorize)) {
+        return ESP_OK;
+    }
+    return ESP_FAIL;
+}

components/bt/host/bluedroid/api/include/api/esp_gap_ble_api.h

@@ -1266,6 +1266,17 @@ esp_err_t esp_ble_gap_disconnect(esp_bd_addr_t remote_device);
 */
 esp_err_t esp_ble_get_current_conn_params(esp_bd_addr_t bd_addr, esp_gap_conn_params_t *conn_params);
 
+/**
+* @brief           This function is called to authorized a link after Authentication(MITM protection)
+*
+* @param[in]       bd_addr: BD address of the peer device.
+* @param[out]      authorize: Authorized the link or not.
+* 
+* @return          - ESP_OK : success
+*                  - other  : failed
+*
+*/
+esp_err_t esp_gap_ble_set_authorization(esp_bd_addr_t bd_addr, bool authorize);
 #ifdef __cplusplus
 }
 #endif

components/bt/host/bluedroid/api/include/api/esp_gatt_defs.h

@@ -283,6 +283,8 @@ typedef enum {
 #define    ESP_GATT_PERM_WRITE_ENC_MITM        (1 << 6)   /* bit 6 -  0x0040 */    /* relate to BTA_GATT_PERM_WRITE_ENC_MITM in bta/bta_gatt_api.h */
 #define    ESP_GATT_PERM_WRITE_SIGNED          (1 << 7)   /* bit 7 -  0x0080 */    /* relate to BTA_GATT_PERM_WRITE_SIGNED in bta/bta_gatt_api.h */
 #define    ESP_GATT_PERM_WRITE_SIGNED_MITM     (1 << 8)   /* bit 8 -  0x0100 */    /* relate to BTA_GATT_PERM_WRITE_SIGNED_MITM in bta/bta_gatt_api.h */
+#define    ESP_GATT_PERM_READ_AUTHORIZATION    (1 << 9)   /* bit 9 -  0x0200 */
+#define    ESP_GATT_PERM_WRITE_AUTHORIZATION   (1 << 10)  /* bit 10 - 0x0400 */
 typedef uint16_t esp_gatt_perm_t;
 
 /* relate to BTA_GATT_CHAR_PROP_BIT_xxx in bta/bta_gatt_api.h */

components/bt/host/bluedroid/bta/include/bta/bta_gatt_api.h

@@ -491,6 +491,8 @@ typedef tGATT_IF tBTA_GATTS_IF;
 #define BTA_GATT_PERM_WRITE_ENC_MITM    GATT_PERM_WRITE_ENC_MITM    /* bit 6 -  0x0040 */
 #define BTA_GATT_PERM_WRITE_SIGNED      GATT_PERM_WRITE_SIGNED      /* bit 7 -  0x0080 */
 #define BTA_GATT_PERM_WRITE_SIGNED_MITM GATT_PERM_WRITE_SIGNED_MITM /* bit 8 -  0x0100 */
+#define BTA_GATT_PERM_READ_AUTHORIZATION GATT_PERM_READ_AUTHORIZATION /* bit 9 - 0x0200 */
+#define BTA_GATT_PERM_WRITE_AUTHORIZATION GATT_PERM_WRITE_AUTHORIZATION /* bit 10 - 0x0400 */
 typedef UINT16 tBTA_GATT_PERM;
 typedef tGATT_ATTR_VAL tBTA_GATT_ATTR_VAL;
 typedef tGATTS_ATTR_CONTROL tBTA_GATTS_ATTR_CONTROL;

components/bt/host/bluedroid/stack/btm/btm_ble_gap.c

@@ -4423,5 +4423,28 @@ BOOLEAN btm_ble_topology_check(tBTM_BLE_STATE_MASK request_state_mask)
     return rt;
 }
 
+/*******************************************************************************
+ **
+ ** Function         BTM_Ble_Authorization
+ **
+ ** Description      This function is used to authorize a specified device
+ **
+ ** Returns          TRUE or FALSE
+ **
+ *******************************************************************************/
+BOOLEAN BTM_Ble_Authorization(BD_ADDR bd_addr, BOOLEAN authorize)
+{
+    if (bd_addr == NULL) {
+        BTM_TRACE_ERROR("bd_addr is NULL");
+        return FALSE;
+    }
+
+    if (btm_sec_dev_authorization(bd_addr, authorize)) {
+        return TRUE;
+    }
+
+    BTM_TRACE_ERROR("Authorization fail");
+    return FALSE;
+}
 
 #endif  /* BLE_INCLUDED */

components/bt/host/bluedroid/stack/btm/btm_sec.c

@@ -6287,3 +6287,39 @@ void btm_sec_handle_remote_legacy_auth_cmp(UINT16 handle)
 }
 #endif /// (CLASSIC_BT_INCLUDED == TRUE)
 #endif  ///SMP_INCLUDED == TRUE
+
+/******************************************************************************
+ **
+ ** Function         btm_sec_dev_authorization
+ **
+ ** Description      This function is used to authorize a specified device(BLE)
+ **
+ ******************************************************************************
+ */
+#if (BLE_INCLUDED == TRUE)
+BOOLEAN btm_sec_dev_authorization(BD_ADDR bd_addr, BOOLEAN authorized)
+{
+#if (SMP_INCLUDED == TRUE)
+    UINT8  sec_flag = 0;
+    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev(bd_addr);
+    if (p_dev_rec) {
+        sec_flag = (UINT8)(p_dev_rec->sec_flags >> 8);
+        if (!(sec_flag & BTM_SEC_LINK_KEY_AUTHED)) {
+            BTM_TRACE_ERROR("Authorized should after successful Authentication(MITM protection)\n"); 
+            return FALSE;
+        }
+
+        if (authorized) {
+            p_dev_rec->sec_flags |= BTM_SEC_LE_AUTHORIZATION;
+        } else {
+            p_dev_rec->sec_flags &= ~(BTM_SEC_LE_AUTHORIZATION);
+        }
+    } else {
+        BTM_TRACE_ERROR("%s, can't find device\n", __func__);
+        return FALSE;
+    }
+    return TRUE;
+#endif  ///SMP_INCLUDED == TRUE
+    return FALSE;
+}
+#endif  /// BLE_INCLUDE == TRUE

components/bt/host/bluedroid/stack/btm/include/btm_int.h

@@ -550,6 +550,7 @@ typedef struct {
 #define BTM_SEC_ROLE_SWITCHED   0x40
 #define BTM_SEC_IN_USE          0x80
     /* LE link security flag */
+#define BTM_SEC_LE_AUTHORIZATION   0x0100   /* LE link is authorized */
 #define BTM_SEC_LE_AUTHENTICATED   0x0200   /* LE link is encrypted after pairing with MITM */
 #define BTM_SEC_LE_ENCRYPTED       0x0400   /* LE link is encrypted */
 #define BTM_SEC_LE_NAME_KNOWN      0x0800   /* not used */
@@ -1170,6 +1171,8 @@ void btm_sec_handle_remote_legacy_auth_cmp(UINT16 handle);
 void btm_sec_update_legacy_auth_state(tACL_CONN *p_acl_cb, UINT8 legacy_auth_state);
 BOOLEAN btm_sec_legacy_authentication_mutual (tBTM_SEC_DEV_REC *p_dev_rec);
 
+BOOLEAN btm_sec_dev_authorization(BD_ADDR bd_addr, BOOLEAN authorized);
+
 /*
 #ifdef __cplusplus
 }

components/bt/host/bluedroid/stack/gatt/gatt_db.c

@@ -154,7 +154,11 @@ static tGATT_STATUS gatts_check_attr_readability(tGATT_ATTR16 *p_attr,
         GATT_TRACE_ERROR( "GATT_INSUF_KEY_SIZE\n");
         return GATT_INSUF_KEY_SIZE;
     }
-
+    /* LE Authorization check*/
+    if ((perm & GATT_READ_AUTHORIZATION) && (!(sec_flag & GATT_SEC_FLAG_LKEY_AUTHED) || !(sec_flag & GATT_SEC_FLAG_AUTHORIZATION))) {
+        GATT_TRACE_ERROR( "GATT_INSUF_AUTHORIZATION\n");
+        return GATT_INSUF_AUTHORIZATION;
+    }
 
     if (read_long) {
         switch (p_attr->uuid) {
@@ -1118,6 +1122,11 @@ tGATT_STATUS gatts_write_attr_perm_check (tGATT_SVC_DB *p_db, UINT8 op_code,
                     status = GATT_INSUF_KEY_SIZE;
                     GATT_TRACE_ERROR( "gatts_write_attr_perm_check - GATT_INSUF_KEY_SIZE");
                 }
+                /* LE Authorization check*/
+                else if ((perm & GATT_WRITE_AUTHORIZATION) && (!(sec_flag & GATT_SEC_FLAG_LKEY_AUTHED) || !(sec_flag & GATT_SEC_FLAG_AUTHORIZATION))){
+                    status = GATT_INSUF_AUTHORIZATION;
+                    GATT_TRACE_ERROR( "gatts_write_attr_perm_check - GATT_INSUF_AUTHORIZATION");
+                }
                 /* LE security mode 2 attribute  */
                 else if (perm & GATT_WRITE_SIGNED_PERM && op_code != GATT_SIGN_CMD_WRITE && !(sec_flag & GATT_SEC_FLAG_ENCRYPTED)
                          &&  (perm & GATT_WRITE_ALLOWED) == 0) {

components/bt/host/bluedroid/stack/gatt/gatt_utils.c

@@ -1423,7 +1423,7 @@ void gatt_sr_get_sec_info(BD_ADDR rem_bda, tBT_TRANSPORT transport, UINT8 *p_sec
 
     BTM_GetSecurityFlagsByTransport(rem_bda, &sec_flag, transport);
 
-    sec_flag &= (GATT_SEC_FLAG_LKEY_UNAUTHED | GATT_SEC_FLAG_LKEY_AUTHED | GATT_SEC_FLAG_ENCRYPTED);
+    sec_flag &= (GATT_SEC_FLAG_LKEY_UNAUTHED | GATT_SEC_FLAG_LKEY_AUTHED | GATT_SEC_FLAG_ENCRYPTED | GATT_SEC_FLAG_AUTHORIZATION);
 #if (SMP_INCLUDED == TRUE)
     *p_key_size = btm_ble_read_sec_key_size(rem_bda);
 #endif  ///SMP_INCLUDED == TRUE

components/bt/host/bluedroid/stack/gatt/include/gatt_int.h

@@ -95,6 +95,7 @@ typedef UINT8 tGATT_SEC_ACTION;
 #define GATT_SEC_FLAG_LKEY_UNAUTHED     BTM_SEC_FLAG_LKEY_KNOWN
 #define GATT_SEC_FLAG_LKEY_AUTHED       BTM_SEC_FLAG_LKEY_AUTHED
 #define GATT_SEC_FLAG_ENCRYPTED         BTM_SEC_FLAG_ENCRYPTED
+#define GATT_SEC_FLAG_AUTHORIZATION     BTM_SEC_FLAG_AUTHORIZED
 typedef UINT8 tGATT_SEC_FLAG;
 
 /* Find Information Response Type

components/bt/host/bluedroid/stack/include/stack/btm_ble_api.h

@@ -2112,6 +2112,17 @@ tBTM_STATUS BTM_UpdateBleDuplicateExceptionalList(uint8_t subcode, uint32_t type
 *******************************************************************************/
 
 BOOLEAN BTM_GetCurrentConnParams(BD_ADDR bda, uint16_t *interval, uint16_t *latency, uint16_t *timeout);
+
+/*******************************************************************************
+**
+** Function         BTM_Ble_Authorization
+**
+** Description      This function is used to authorize a specified device
+**
+** Returns          TRUE or FALSE
+**
+*******************************************************************************/
+BOOLEAN BTM_Ble_Authorization(BD_ADDR bd_addr, BOOLEAN authorize);
 /*
 #ifdef __cplusplus
 }

components/bt/host/bluedroid/stack/include/stack/gatt_api.h

@@ -174,18 +174,21 @@ typedef UINT16 tGATT_DISCONN_REASON;
 #define GATT_PERM_WRITE_ENC_MITM            (1 << 6) /* bit 6 */
 #define GATT_PERM_WRITE_SIGNED              (1 << 7) /* bit 7 */
 #define GATT_PERM_WRITE_SIGNED_MITM         (1 << 8) /* bit 8 */
+#define GATT_PERM_READ_AUTHORIZATION        (1 << 9) /* bit 9 */
+#define GATT_PERM_WRITE_AUTHORIZATION       (1 << 10)/* bit 10 */
 typedef UINT16 tGATT_PERM;
 
 #define GATT_ENCRYPT_KEY_SIZE_MASK  (0xF000) /* the MS nibble of tGATT_PERM; key size 7=0; size 16=9 */
 
-#define GATT_READ_ALLOWED                   (GATT_PERM_READ | GATT_PERM_READ_ENCRYPTED | GATT_PERM_READ_ENC_MITM)
+#define GATT_READ_ALLOWED                   (GATT_PERM_READ | GATT_PERM_READ_ENCRYPTED | GATT_PERM_READ_ENC_MITM | GATT_PERM_READ_AUTHORIZATION)
 #define GATT_READ_AUTH_REQUIRED             (GATT_PERM_READ_ENCRYPTED)
 #define GATT_READ_MITM_REQUIRED             (GATT_PERM_READ_ENC_MITM)
 #define GATT_READ_ENCRYPTED_REQUIRED        (GATT_PERM_READ_ENCRYPTED | GATT_PERM_READ_ENC_MITM)
+#define GATT_READ_AUTHORIZATION             (GATT_PERM_READ_AUTHORIZATION)
 
 
 #define GATT_WRITE_ALLOWED          (GATT_PERM_WRITE | GATT_PERM_WRITE_ENCRYPTED | GATT_PERM_WRITE_ENC_MITM | \
-                                     GATT_PERM_WRITE_SIGNED | GATT_PERM_WRITE_SIGNED_MITM)
+                                     GATT_PERM_WRITE_SIGNED | GATT_PERM_WRITE_SIGNED_MITM | GATT_PERM_WRITE_AUTHORIZATION)
 
 #define GATT_WRITE_AUTH_REQUIRED    (GATT_PERM_WRITE_ENCRYPTED | GATT_PERM_WRITE_SIGNED)
 
@@ -195,6 +198,8 @@ typedef UINT16 tGATT_PERM;
 
 #define GATT_WRITE_SIGNED_PERM      (GATT_PERM_WRITE_SIGNED | GATT_PERM_WRITE_SIGNED_MITM)
 
+#define GATT_WRITE_AUTHORIZATION    (GATT_PERM_WRITE_AUTHORIZATION)
+
 
 /* Characteristic properties
 */