mirror of
https://github.com/espressif/esp-idf
synced 2025-03-09 17:19:09 -04:00
Merge branch 'docs/delete_user_guide_esp32_s2_and_s3' into 'master'
docs: Delete user guide esp32-s2-saola-1, esp32-s3-devkitc-1 and esp32-s3-devkitm-1 Closes DOC-6934, DOC-6935, DOC-6936, and DOC-6937 See merge request espressif/esp-idf!34229
This commit is contained in:
Zhang Shu Xian
commit
1a5741b0bd
BIN
docs/_static/ESP32-S3-DevKitC-1_v1-SystemBlock.png
vendored
BIN
docs/_static/ESP32-S3-DevKitC-1_v1-SystemBlock.png
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 65 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 326 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 339 KiB |
BIN
docs/_static/ESP32-S3-DevKitC-1_v2-SystemBlock.png
vendored
BIN
docs/_static/ESP32-S3-DevKitC-1_v2-SystemBlock.png
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 68 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 366 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 327 KiB |
BIN
docs/_static/ESP32-S3-DevKitM-1_v1_SystemBlock.png
vendored
BIN
docs/_static/ESP32-S3-DevKitM-1_v1_SystemBlock.png
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 64 KiB |
BIN
docs/_static/ESP32-S3_DevKitC-1_pinlayout.jpg
vendored
BIN
docs/_static/ESP32-S3_DevKitC-1_pinlayout.jpg
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 332 KiB |
BIN
docs/_static/ESP32-S3_DevKitC-1_pinlayout_v1.1.jpg
vendored
BIN
docs/_static/ESP32-S3_DevKitC-1_pinlayout_v1.1.jpg
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 450 KiB |
BIN
docs/_static/ESP32-S3_DevKitM-1_pinlayout.jpg
vendored
BIN
docs/_static/ESP32-S3_DevKitM-1_pinlayout.jpg
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 294 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 298 KiB |
BIN
docs/_static/esp32-s2-saola-1-v1.2-block-diags.png
vendored
BIN
docs/_static/esp32-s2-saola-1-v1.2-block-diags.png
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 74 KiB |
BIN
docs/_static/esp32-s2-saola-1-v1.2-isometric.png
vendored
BIN
docs/_static/esp32-s2-saola-1-v1.2-isometric.png
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 158 KiB |
BIN
docs/_static/esp32-s2_saola1-pinout.jpg
vendored
BIN
docs/_static/esp32-s2_saola1-pinout.jpg
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 444 KiB |
BIN
docs/_static/esp32-s3-devkitc-1-v1-isometric.png
vendored
BIN
docs/_static/esp32-s3-devkitc-1-v1-isometric.png
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 468 KiB |
BIN
docs/_static/esp32-s3-devkitc-1-v1.1-isometric.png
vendored
BIN
docs/_static/esp32-s3-devkitc-1-v1.1-isometric.png
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 468 KiB |
BIN
docs/_static/esp32-s3-devkitm-1-v1-isometric.png
vendored
BIN
docs/_static/esp32-s3-devkitm-1-v1-isometric.png
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 470 KiB |
@ -120,7 +120,7 @@ If you have one of {IDF_TARGET_NAME} official development boards listed below, y
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
ESP32-S2-Saola-1 <../hw-reference/esp32s2/user-guide-saola-1-v1.2>
|
||||
ESP32-S2-Saola-1 <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-saola-1/index.html>
|
||||
ESP32-S2-DevKitM-1 <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-devkitm-1/index.html>
|
||||
ESP32-S2-DevKitC-1 <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-devkitc-1/index.html>
|
||||
ESP32-S2-Kaluga-Kit <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-kaluga-1/index.html>
|
||||
@ -139,8 +139,8 @@ If you have one of {IDF_TARGET_NAME} official development boards listed below, y
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
ESP32-S3-DevKitC-1 <../hw-reference/esp32s3/user-guide-devkitc-1>
|
||||
ESP32-S3-DevKitM-1 <../hw-reference/esp32s3/user-guide-devkitm-1>
|
||||
ESP32-S3-DevKitC-1 <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-devkitc-1/index.html>
|
||||
ESP32-S3-DevKitM-1 <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-devkitm-1/index.html>
|
||||
|
||||
.. only:: esp32c2
|
||||
|
||||
|
||||
@ -1,262 +0,0 @@
|
||||
================
|
||||
ESP32-S2-Saola-1
|
||||
================
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
This user guide provides information on ESP32-S2-Saola-1, a small-sized `ESP32-S2 Datasheet`_ based development board produced by Espressif.
|
||||
|
||||
.. figure:: ../../../_static/esp32-s2-saola-1-v1.2-isometric.png
|
||||
:align: center
|
||||
:alt: ESP32-S2-Saola-1
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Saola-1
|
||||
|
||||
The document consists of the following major sections:
|
||||
|
||||
- `Getting started`_: Provides an overview of the ESP32-S2-Saola-1 and hardware/software setup instructions to get started.
|
||||
- `Hardware reference`_: Provides more detailed information about the ESP32-S2-Saola-1's hardware.
|
||||
- `Hardware Revision Details`_: Revision history, known issues, and links to user guides for previous versions (if any) of ESP32-S2-Saola-1.
|
||||
- `Related Documents`_: Gives links to related documentation.
|
||||
|
||||
|
||||
Getting Started
|
||||
===============
|
||||
|
||||
This section describes how to get started with ESP32-S2-Saola-1. It begins with a few introductory sections about the ESP32-S2-Saola-1, then Section `Start Application Development`_ provides instructions on how to get the ESP32-S2-Saola-1 ready and flash firmware into it.
|
||||
|
||||
|
||||
Overview
|
||||
--------
|
||||
|
||||
ESP32-S2-Saola-1 is a small-sized ESP32-S2 based development board produced by Espressif. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S2-Saola-1 on a breadboard.
|
||||
|
||||
To cover a wide range of users' needs, ESP32-S2-Saola-1 supports:
|
||||
|
||||
- `ESP32-S2-WROVER <https://www.espressif.com/sites/default/files/documentation/esp32-s2-wrover_esp32-s2-wrover-i_datasheet_en.pdf>`_
|
||||
- `ESP32-S2-WROVER-I <https://www.espressif.com/sites/default/files/documentation/esp32-s2-wrover_esp32-s2-wrover-i_datasheet_en.pdf>`_
|
||||
- `ESP32-S2-WROOM <https://www.espressif.com/sites/default/files/documentation/esp32-s2-wroom_esp32-s2-wroom-i_datasheet_en.pdf>`_
|
||||
- `ESP32-S2-WROOM-I <https://www.espressif.com/sites/default/files/documentation/esp32-s2-wroom_esp32-s2-wroom-i_datasheet_en.pdf>`_
|
||||
|
||||
In this guide, we take ESP32-S2-Saola-1 equipped with ESP32-S2-WROVER as an example.
|
||||
|
||||
|
||||
Contents and Packaging
|
||||
----------------------
|
||||
|
||||
Retail Orders
|
||||
^^^^^^^^^^^^^
|
||||
|
||||
If you order a few samples, each ESP32-S2-Saola-1 comes in an individual package in either antistatic bag or any packaging depending on your retailer.
|
||||
|
||||
For retail orders, please go to https://www.espressif.com/en/contact-us/get-samples.
|
||||
|
||||
|
||||
Wholesale Orders
|
||||
^^^^^^^^^^^^^^^^
|
||||
|
||||
If you order in bulk, the boards come in large cardboard boxes.
|
||||
|
||||
For wholesale orders, please go to https://www.espressif.com/en/contact-us/sales-questions.
|
||||
|
||||
|
||||
Description of Components
|
||||
-------------------------
|
||||
|
||||
.. _user-guide-saola-1-v1.2-board-front:
|
||||
|
||||
.. figure:: ../../../_static/esp32-s2-saola-1-v1.2-annotated-photo.png
|
||||
:align: center
|
||||
:alt: ESP32-S2-Saola-1 - front/back
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Saola-1 - front
|
||||
|
||||
The key components of the board are described in a clockwise direction.
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - ESP32-S2-WROVER
|
||||
- ESP32-S2-WROVER is a powerful, generic Wi-Fi MCU module that integrates ESP32-S2. It has a PCB antenna, a 4 MB external SPI flash and an additional 2 MB PSRAM.
|
||||
* - Pin Headers
|
||||
- All available GPIO pins (except for the SPI bus for flash and PSRAM) are broken out to the pin headers on the board. Users can program ESP32-S2 chip to enable multiple functions such as SPI, I2S, UART, I2C, touch sensors, PWM etc.
|
||||
* - 3.3 V Power On LED
|
||||
- Turns on when the USB power is connected to the board.
|
||||
* - USB-to-UART Bridge
|
||||
- Single USB-UART bridge chip provides transfer rates up to 3 Mbps.
|
||||
* - Reset Button
|
||||
- Reset button.
|
||||
* - Micro-USB Port
|
||||
- USB interface. Power supply for the board as well as the communication interface between a computer and the ESP32-S2 chip.
|
||||
* - Boot Button
|
||||
- Download button. Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port.
|
||||
* - RGB LED
|
||||
- Addressable RGB LED (WS2812), driven by GPIO18.
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your ESP32-S2-Saola-1, please make sure that it is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Required Hardware
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
- ESP32-S2-Saola-1
|
||||
- USB 2.0 cable (Standard-A to Micro-B)
|
||||
- Computer running Windows, Linux, or macOS
|
||||
|
||||
.. note::
|
||||
|
||||
Be sure to use an appropriate USB cable. Some cables are for charging only and do not provide the needed data lines nor work for programming the boards.
|
||||
|
||||
|
||||
Software Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Please proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment and then flash an application example into your ESP32-S2-Saola-1.
|
||||
|
||||
.. note::
|
||||
|
||||
ESP32-S2 series of chips only supports ESP-IDF master or version v4.2 and higher.
|
||||
|
||||
|
||||
Hardware Reference
|
||||
==================
|
||||
|
||||
Block Diagram
|
||||
-------------
|
||||
|
||||
A block diagram below shows the components of ESP32-S2-Saola-1 and their interconnections.
|
||||
|
||||
.. figure:: ../../../_static/esp32-s2-saola-1-v1.2-block-diags.png
|
||||
:align: center
|
||||
:scale: 70%
|
||||
:alt: ESP32-S2-Saola-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Saola-1 (click to enlarge)
|
||||
|
||||
|
||||
Power Supply Options
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
There are three mutually exclusive ways to provide power to the board:
|
||||
|
||||
- Micro-USB port, default power supply
|
||||
- 5V and GND pin headers
|
||||
- 3V3 and GND pin headers
|
||||
|
||||
It is recommended to use the first option: Micro-USB Port.
|
||||
|
||||
|
||||
Header Block
|
||||
------------
|
||||
|
||||
The two tables below provide the **Name** and **Function** of the pin headers on both sides of the board (J2 and J3). The pin header names are shown in :ref:`user-guide-saola-1-v1.2-board-front`. The numbering is the same as in the `ESP32-S2-Saola-1 Schematics`_ (PDF).
|
||||
|
||||
|
||||
J2
|
||||
^^^
|
||||
|
||||
=== ==== ========== ======================================
|
||||
No. Name Type [#]_ Function
|
||||
=== ==== ========== ======================================
|
||||
1 3V3 P 3.3 V power supply
|
||||
2 IO0 I/O GPIO0, Boot
|
||||
3 IO1 I/O GPIO1, ADC1_CH0, TOUCH_CH1
|
||||
4 IO2 I/O GPIO2, ADC1_CH1, TOUCH_CH2
|
||||
5 IO3 I/O GPIO3, ADC1_CH2, TOUCH_CH3
|
||||
6 IO4 I/O GPIO4, ADC1_CH3, TOUCH_CH4
|
||||
7 IO5 I/O GPIO5, ADC1_CH4, TOUCH_CH5
|
||||
8 IO6 I/O GPIO6, ADC1_CH5, TOUCH_CH6
|
||||
9 IO7 I/O GPIO7, ADC1_CH6, TOUCH_CH7
|
||||
10 IO8 I/O GPIO8, ADC1_CH7, TOUCH_CH8
|
||||
11 IO9 I/O GPIO9, ADC1_CH8, TOUCH_CH9
|
||||
12 IO10 I/O GPIO10, ADC1_CH9, TOUCH_CH10
|
||||
13 IO11 I/O GPIO11, ADC2_CH0, TOUCH_CH11
|
||||
14 IO12 I/O GPIO12, ADC2_CH1, TOUCH_CH12
|
||||
15 IO13 I/O GPIO13, ADC2_CH2, TOUCH_CH13
|
||||
16 IO14 I/O GPIO14, ADC2_CH3, TOUCH_CH14
|
||||
17 IO15 I/O GPIO15, ADC2_CH4, XTAL_32K_P
|
||||
18 IO16 I/O GPIO16, ADC2_CH5, XTAL_32K_N
|
||||
19 IO17 I/O GPIO17, ADC2_CH6, DAC_1
|
||||
20 5V0 P 5 V power supply
|
||||
21 GND G Ground
|
||||
=== ==== ========== ======================================
|
||||
|
||||
|
||||
J3
|
||||
^^^
|
||||
|
||||
=== ==== ===== ====================================
|
||||
No. Name Type Function
|
||||
=== ==== ===== ====================================
|
||||
1 GND G Ground
|
||||
2 RST I CHIP_PU, Reset
|
||||
3 IO46 I GPIO46
|
||||
4 IO45 I/O GPIO45
|
||||
5 IO44 I/O GPIO44, U0RXD
|
||||
6 IO43 I/O GPIO43, U0TXD
|
||||
7 IO42 I/O GPIO42, MTMS
|
||||
8 IO41 I/O GPIO41, MTDI
|
||||
9 IO40 I/O GPIO40, MTDO
|
||||
10 IO39 I/O GPIO39, MTCK
|
||||
11 IO38 I/O GPIO38
|
||||
12 IO37 I/O GPIO37
|
||||
13 IO36 I/O GPIO36
|
||||
14 IO35 I/O GPIO35
|
||||
16 IO34 I/O GPIO34
|
||||
17 IO33 I/O GPIO33
|
||||
17 IO26 I/O GPIO26
|
||||
18 IO21 I/O GPIO21
|
||||
19 IO20 I/O GPIO20, ADC2_CH9, USB_D+
|
||||
20 IO19 I/O GPIO19, ADC2_CH8, USB_D-
|
||||
21 IO18 I/O GPIO18, ADC2_CH7, DAC_2, RGB LED
|
||||
=== ==== ===== ====================================
|
||||
|
||||
.. [#] P: Power supply; I: Input; O: Output; T: High impedance.
|
||||
|
||||
|
||||
Pin Layout
|
||||
^^^^^^^^^^^
|
||||
|
||||
.. figure:: ../../../_static/esp32-s2_saola1-pinout.jpg
|
||||
:align: center
|
||||
:scale: 45%
|
||||
:alt: ESP32-S2-Saola-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2 Saola-1 Pin Layout (click to enlarge)
|
||||
|
||||
|
||||
Hardware Revision Details
|
||||
=========================
|
||||
|
||||
This is the first revision of this board released.
|
||||
|
||||
|
||||
Related Documents
|
||||
=================
|
||||
|
||||
* `ESP32-S2-Saola-1 Schematics`_ (PDF)
|
||||
* `ESP32-S2-Saola-1 Dimensions`_ (PDF)
|
||||
* `ESP32-S2 Datasheet`_ (PDF)
|
||||
* `ESP32-S2-WROVER and ESP32-S2-WROVER-I Datasheet`_ (PDF)
|
||||
* `ESP32-S2-WROOM and ESP32-S2-WROOM-I Datasheet`_ (PDF)
|
||||
* `ESP Product Selector`_
|
||||
|
||||
For other design documentation for the board, please contact us at `sales@espressif.com <sales@espressif.com>`_.
|
||||
|
||||
.. _ESP32-S2-Saola-1 Schematics: https://dl.espressif.com/dl/schematics/ESP32-S2-SAOLA-1_V1.1_schematics.pdf
|
||||
.. _ESP32-S2-Saola-1 Dimensions: https://dl.espressif.com/dl/schematics/ESP32-S2-Saola-1_V1.2_Dimensions.pdf
|
||||
.. _ESP32-S2 Datasheet: https://www.espressif.com/sites/default/files/documentation/esp32-s2_datasheet_en.pdf
|
||||
.. _ESP32-S2-WROVER and ESP32-S2-WROVER-I Datasheet: https://www.espressif.com/sites/default/files/documentation/esp32-s2-wrover_esp32-s2-wrover-i_datasheet_en.pdf
|
||||
.. _ESP32-S2-WROOM and ESP32-S2-WROOM-I Datasheet: https://www.espressif.com/sites/default/files/documentation/esp32-s2-wroom_esp32-s2-wroom-i_datasheet_en.pdf
|
||||
.. _ESP Product Selector: https://products.espressif.com/#/product-selector?names=
|
||||
@ -1,320 +0,0 @@
|
||||
==================
|
||||
ESP32-S3-DevKitC-1
|
||||
==================
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
The latest version: :doc:`user-guide-devkitc-1`
|
||||
|
||||
This user guide will help you get started with ESP32-S3-DevKitC-1 and will also provide more in-depth information.
|
||||
|
||||
The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, ESP32-S3-WROOM-1U, or ESP32-S3-WROOM-2, a general-purpose Wi-Fi + Bluetooth® Low Energy MCU module that integrates complete Wi-Fi and Bluetooth Low Energy functions.
|
||||
|
||||
Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitC-1 on a breadboard.
|
||||
|
||||
.. figure:: ../../../_static/esp32-s3-devkitc-1-v1-isometric.png
|
||||
:align: center
|
||||
:alt: ESP32-S3-DevKitC-1 with ESP32-S3-WROOM-1 Module
|
||||
|
||||
ESP32-S3-DevKitC-1 with ESP32-S3-WROOM-1 Module
|
||||
|
||||
|
||||
The document consists of the following major sections:
|
||||
|
||||
- `Getting started`_: Overview of the board and hardware/software setup instructions to get started.
|
||||
- `Hardware Reference`_: More detailed information about the board's hardware.
|
||||
- `Hardware Revision Details`_: Revision history, known issues, and links to user guides for previous versions (if any) of the board.
|
||||
- `Related Documents`_: Links to related documentation.
|
||||
|
||||
|
||||
Getting Started
|
||||
===============
|
||||
|
||||
This section provides a brief introduction of ESP32-S3-DevKitC-1, instructions on how to do the initial hardware setup and how to flash firmware onto it.
|
||||
|
||||
|
||||
Description of Components
|
||||
-------------------------
|
||||
|
||||
.. _user-guide-s3-devkitc-1-v1-board-front:
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3-DevKitC-1_v2-annotated-photo.png
|
||||
:align: center
|
||||
:alt: ESP32-S3-DevKitC-1 - front
|
||||
|
||||
ESP32-S3-DevKitC-1 - front
|
||||
|
||||
The key components of the board are described in a counter-clockwise direction.
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - ESP32-S3-WROOM-1/1U/2
|
||||
- ESP32-S3-WROOM-1, ESP32-S3-WROOM-1U, and ESP32-S3-WROOM-2 are powerful, generic Wi-Fi + Bluetooth Low Energy MCU modules that have a rich set of peripherals. They provide acceleration for neural network computing and signal processing workloads. ESP32-S3-WROOM-1 and ESP32-S3-WROOM-2 comes with a PCB antenna. ESP32-S3-WROOM-1U comes with an external antenna connector.
|
||||
* - 5 V to 3.3 V LDO
|
||||
- Power regulator that converts a 5 V supply into a 3.3 V output.
|
||||
* - Pin Headers
|
||||
- All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board for easy interfacing and programming. For details, please see :ref:`user-guide-s3-devkitc-1-v1-header-blocks`.
|
||||
* - USB-to-UART Port
|
||||
- A Micro-USB port used for power supply to the board, for flashing applications to the chip, as well as for communication with the chip via the on-board USB-to-UART bridge.
|
||||
* - Boot Button
|
||||
- Download button. Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port.
|
||||
* - Reset Button
|
||||
- Press this button to restart the system.
|
||||
* - ESP32-S3 USB Port
|
||||
- ESP32-S3 full-speed USB OTG interface, compliant with the USB 1.1 specification. The interface is used for power supply to the board, for flashing applications to the chip, for communication with the chip using USB 1.1 protocols, as well as for JTAG debugging.
|
||||
* - USB-to-UART Bridge
|
||||
- Single USB-to-UART bridge chip provides transfer rates up to 3 Mbps.
|
||||
* - RGB LED
|
||||
- Addressable RGB LED, driven by GPIO48.
|
||||
* - 3.3 V Power On LED
|
||||
- Turns on when the USB power is connected to the board.
|
||||
|
||||
.. note::
|
||||
|
||||
For boards with Octal SPI flash/PSRAM memory embedded ESP32-S3-WROOM-1/1U modules, and boards with ESP32-S3-WROOM-2 modules, the pins GPIO35, GPIO36 and GPIO37 are used for the internal communication between ESP32-S3 and SPI flash/PSRAM memory, thus not available for external use.
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your board, please make sure that it is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Required Hardware
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
- ESP32-S3-DevKitC-1
|
||||
- USB 2.0 cable (Standard-A to Micro-B)
|
||||
- Computer running Windows, Linux, or macOS
|
||||
|
||||
.. note::
|
||||
|
||||
Be sure to use an appropriate USB cable. Some cables are for charging only and do not provide the needed data lines nor work for programming the boards.
|
||||
|
||||
|
||||
Hardware Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Connect the board with the computer using **USB-to-UART Port**. Connection using **ESP32-S3 USB Port** is not fully implemented in software. In subsequent steps, **USB-to-UART Port** will be used by default.
|
||||
|
||||
|
||||
Software Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Please proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment and then flash an application example onto your board.
|
||||
|
||||
|
||||
Contents and Packaging
|
||||
----------------------
|
||||
|
||||
Ordering Information
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
The development board has a variety of variants to choose from, as shown in the table below.
|
||||
|
||||
.. list-table::
|
||||
:widths: 28 29 19 17 15
|
||||
:header-rows: 1
|
||||
|
||||
* - Ordering Code
|
||||
- Module Integrated
|
||||
- Flash
|
||||
- PSRAM
|
||||
- SPI Voltage
|
||||
* - ESP32-S3-DevKitC-1-N8
|
||||
- ESP32-S3-WROOM-1-N8
|
||||
- 8 MB QD
|
||||
- —
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1-N8R2
|
||||
- ESP32-S3-WROOM-1-N8R2
|
||||
- 8 MB QD
|
||||
- 2 MB QD
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1-N8R8
|
||||
- ESP32-S3-WROOM-1-N8R8
|
||||
- 8 MB QD
|
||||
- 8 MB OT
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1-N16R8V
|
||||
- ESP32-S3-WROOM-2-N16R8V
|
||||
- 16 MB OT
|
||||
- 8 MB OT
|
||||
- 1.8 V
|
||||
* - ESP32-S3-DevKitC-1-N32R8V
|
||||
- ESP32-S3-WROOM-2-N32R8V
|
||||
- 32 MB OT
|
||||
- 8 MB OT
|
||||
- 1.8 V
|
||||
* - ESP32-S3-DevKitC-1U-N8
|
||||
- ESP32-S3-WROOM-1U-N8
|
||||
- 8 MB QD
|
||||
- —
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1U-N8R2
|
||||
- ESP32-S3-WROOM-1U-N8R2
|
||||
- 8 MB QD
|
||||
- 2 MB QD
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1U-N8R8
|
||||
- ESP32-S3-WROOM-1U-N8R8
|
||||
- 8 MB QD
|
||||
- 8 MB OT
|
||||
- 3.3 V
|
||||
|
||||
.. note::
|
||||
|
||||
In the table above, QD stands for Quad SPI and OT stands for Octal SPI.
|
||||
|
||||
|
||||
Retail Orders
|
||||
^^^^^^^^^^^^^
|
||||
|
||||
If you order a few samples, each board comes in an individual package in either antistatic bag or any packaging depending on your retailer.
|
||||
|
||||
For retail orders, please go to https://www.espressif.com/en/company/contact/buy-a-sample.
|
||||
|
||||
|
||||
Wholesale Orders
|
||||
^^^^^^^^^^^^^^^^
|
||||
|
||||
If you order in bulk, the boards come in large cardboard boxes.
|
||||
|
||||
For wholesale orders, please go to https://www.espressif.com/en/contact-us/sales-questions.
|
||||
|
||||
|
||||
Hardware Reference
|
||||
==================
|
||||
|
||||
Block Diagram
|
||||
-------------
|
||||
|
||||
The block diagram below shows the components of ESP32-S3-DevKitC-1 and their interconnections.
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3-DevKitC-1_v2-SystemBlock.png
|
||||
:align: center
|
||||
:scale: 70%
|
||||
:alt: ESP32-S3-DevKitC-1 (click to enlarge)
|
||||
|
||||
ESP32-S3-DevKitC-1 (click to enlarge)
|
||||
|
||||
|
||||
Power Supply Options
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
There are three mutually exclusive ways to provide power to the board:
|
||||
|
||||
- USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended)
|
||||
- 5V and G (GND) pins
|
||||
- 3V3 and G (GND) pins
|
||||
|
||||
|
||||
.. _user-guide-s3-devkitc-1-v1-header-blocks:
|
||||
|
||||
Header Block
|
||||
------------
|
||||
|
||||
The two tables below provide the **Name** and **Function** of the pins on both sides of the board (J1 and J3). The pin names are shown in :ref:`user-guide-s3-devkitc-1-v1-board-front`. The numbering is the same as in the `Board Schematic <https://dl.espressif.com/dl/SCH_ESP32-S3-DEVKITC-1_V1_20210312C.pdf>`_ (PDF).
|
||||
|
||||
|
||||
J1
|
||||
^^^
|
||||
|
||||
=== ==== ========== ===================================
|
||||
No. Name Type [#]_ Function
|
||||
=== ==== ========== ===================================
|
||||
1 3V3 P 3.3 V power supply
|
||||
2 3V3 P 3.3 V power supply
|
||||
3 RST I EN
|
||||
4 4 I/O/T RTC_GPIO4, GPIO4, TOUCH4, ADC1_CH3
|
||||
5 5 I/O/T RTC_GPIO5, GPIO5, TOUCH5, ADC1_CH4
|
||||
6 6 I/O/T RTC_GPIO6, GPIO6, TOUCH6, ADC1_CH5
|
||||
7 7 I/O/T RTC_GPIO7, GPIO7, TOUCH7, ADC1_CH6
|
||||
8 15 I/O/T RTC_GPIO15, GPIO15, U0RTS, ADC2_CH4, XTAL_32K_P
|
||||
9 16 I/O/T RTC_GPIO16, GPIO16, U0CTS, ADC2_CH5, XTAL_32K_N
|
||||
10 17 I/O/T RTC_GPIO17, GPIO17, U1TXD, ADC2_CH6
|
||||
11 18 I/O/T RTC_GPIO18, GPIO18, U1RXD, ADC2_CH7, CLK_OUT3
|
||||
12 8 I/O/T RTC_GPIO8, GPIO8, TOUCH8, ADC1_CH7, SUBSPICS1
|
||||
13 3 I/O/T RTC_GPIO3, GPIO3, TOUCH3, ADC1_CH2
|
||||
14 46 I/O/T GPIO46
|
||||
15 9 I/O/T RTC_GPIO9, GPIO9, TOUCH9, ADC1_CH8, FSPIHD, SUBSPIHD
|
||||
16 10 I/O/T RTC_GPIO10, GPIO10, TOUCH10, ADC1_CH9, FSPICS0, FSPIIO4, SUBSPICS0
|
||||
17 11 I/O/T RTC_GPIO11, GPIO11, TOUCH11, ADC2_CH0, FSPID, FSPIIO5, SUBSPID
|
||||
18 12 I/O/T RTC_GPIO12, GPIO12, TOUCH12, ADC2_CH1, FSPICLK, FSPIIO6, SUBSPICLK
|
||||
19 13 I/O/T RTC_GPIO13, GPIO13, TOUCH13, ADC2_CH2, FSPIQ, FSPIIO7, SUBSPIQ
|
||||
20 14 I/O/T RTC_GPIO14, GPIO14, TOUCH14, ADC2_CH3, FSPIWP, FSPIDQS, SUBSPIWP
|
||||
21 5V P 5 V power supply
|
||||
22 G G Ground
|
||||
=== ==== ========== ===================================
|
||||
|
||||
|
||||
J3
|
||||
^^^
|
||||
|
||||
=== ==== ===== ====================================
|
||||
No. Name Type Function
|
||||
=== ==== ===== ====================================
|
||||
1 G G Ground
|
||||
2 TX I/O/T U0TXD, GPIO43, CLK_OUT1
|
||||
3 RX I/O/T U0RXD, GPIO44, CLK_OUT2
|
||||
4 1 I/O/T RTC_GPIO1, GPIO1, TOUCH1, ADC1_CH0
|
||||
5 2 I/O/T RTC_GPIO2, GPIO2, TOUCH2, ADC1_CH1
|
||||
6 42 I/O/T MTMS, GPIO42
|
||||
7 41 I/O/T MTDI, GPIO41, CLK_OUT1
|
||||
8 40 I/O/T MTDO, GPIO40, CLK_OUT2
|
||||
9 39 I/O/T MTCK, GPIO39, CLK_OUT3, SUBSPICS1
|
||||
10 38 I/O/T GPIO38, FSPIWP, SUBSPIWP
|
||||
11 37 I/O/T SPIDQS, GPIO37, FSPIQ, SUBSPIQ
|
||||
12 36 I/O/T SPIIO7, GPIO36, FSPICLK, SUBSPICLK
|
||||
13 35 I/O/T SPIIO6, GPIO35, FSPID, SUBSPID
|
||||
14 0 I/O/T RTC_GPIO0, GPIO0
|
||||
15 45 I/O/T GPIO45
|
||||
16 48 I/O/T GPIO48, SPICLK_N, SUBSPICLK_N_DIFF, RGB LED
|
||||
17 47 I/O/T GPIO47, SPICLK_P, SUBSPICLK_P_DIFF
|
||||
18 21 I/O/T RTC_GPIO21, GPIO21
|
||||
19 20 I/O/T RTC_GPIO20, GPIO20, U1CTS, ADC2_CH9, CLK_OUT1, USB_D+
|
||||
20 19 I/O/T RTC_GPIO19, GPIO19, U1RTS, ADC2_CH8, CLK_OUT2, USB_D-
|
||||
21 G G Ground
|
||||
22 G G Ground
|
||||
=== ==== ===== ====================================
|
||||
|
||||
|
||||
.. [#] P: Power supply; I: Input; O: Output; T: High impedance.
|
||||
|
||||
|
||||
For description of function names, please refer to `Chip Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf>`_ (PDF).
|
||||
|
||||
|
||||
Pin Layout
|
||||
^^^^^^^^^^
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3_DevKitC-1_pinlayout.jpg
|
||||
:align: center
|
||||
:scale: 50%
|
||||
:alt: ESP32-S3-DevKitC-1 (click to enlarge)
|
||||
|
||||
ESP32-S3-DevKitC-1 Pin Layout (click to enlarge)
|
||||
|
||||
|
||||
Hardware Revision Details
|
||||
=========================
|
||||
|
||||
This is the first revision of this board released.
|
||||
|
||||
|
||||
Related Documents
|
||||
=================
|
||||
|
||||
- `ESP32-S3 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf>`_ (PDF)
|
||||
- `ESP32-S3-WROOM-1 & ESP32-S3-WROOM-1U Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf>`_ (PDF)
|
||||
- `ESP32-S3-WROOM-2 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-2_datasheet_en.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 Schematic <https://dl.espressif.com/dl/SCH_ESP32-S3-DEVKITC-1_V1_20210312C.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 PCB layout <https://dl.espressif.com/dl/PCB_ESP32-S3-DevKitC-1_V1_20210312CB.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 Dimensions <https://dl.espressif.com/dl/DXF_ESP32-S3-DevKitC-1_V1_20210312CB.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 Dimensions source file <https://dl.espressif.com/dl/DXF_ESP32-S3-DevKitC-1_V1_20210312CB.dxf>`_ (DXF) - You can view it with `Autodesk Viewer <https://viewer.autodesk.com/>`_ online
|
||||
|
||||
For further design documentation for the board, please contact us at `sales@espressif.com <sales@espressif.com>`_.
|
||||
@ -1,329 +0,0 @@
|
||||
=======================
|
||||
ESP32-S3-DevKitC-1 v1.1
|
||||
=======================
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
The older version: :doc:`user-guide-devkitc-1-v1.0`
|
||||
|
||||
This user guide will help you get started with ESP32-S3-DevKitC-1 and will also provide more in-depth information.
|
||||
|
||||
The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, ESP32-S3-WROOM-1U, or ESP32-S3-WROOM-2, a general-purpose Wi-Fi + Bluetooth® Low Energy MCU module that integrates complete Wi-Fi and Bluetooth Low Energy functions.
|
||||
|
||||
Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitC-1 on a breadboard.
|
||||
|
||||
.. figure:: ../../../_static/esp32-s3-devkitc-1-v1.1-isometric.png
|
||||
:align: center
|
||||
:alt: ESP32-S3-DevKitC-1 with ESP32-S3-WROOM-1 Module
|
||||
|
||||
ESP32-S3-DevKitC-1 with ESP32-S3-WROOM-1 Module
|
||||
|
||||
|
||||
The document consists of the following major sections:
|
||||
|
||||
- `Getting started`_: Overview of the board and hardware/software setup instructions to get started.
|
||||
- `Hardware Reference`_: More detailed information about the board's hardware.
|
||||
- `Hardware Revision Details`_: Revision history, known issues, and links to user guides for previous versions (if any) of the board.
|
||||
- `Related Documents`_: Links to related documentation.
|
||||
|
||||
|
||||
Getting Started
|
||||
===============
|
||||
|
||||
This section provides a brief introduction of ESP32-S3-DevKitC-1, instructions on how to do the initial hardware setup and how to flash firmware onto it.
|
||||
|
||||
|
||||
Description of Components
|
||||
-------------------------
|
||||
|
||||
.. _user-guide-s3-devkitc-1-v1.1-board-front:
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3-DevKitC-1_v2-annotated-photo.png
|
||||
:align: center
|
||||
:alt: ESP32-S3-DevKitC-1 - front
|
||||
|
||||
ESP32-S3-DevKitC-1 - front
|
||||
|
||||
The key components of the board are described in a counter-clockwise direction.
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - ESP32-S3-WROOM-1/1U/2
|
||||
- ESP32-S3-WROOM-1, ESP32-S3-WROOM-1U, and ESP32-S3-WROOM-2 are powerful, generic Wi-Fi + Bluetooth Low Energy MCU modules that have a rich set of peripherals. They provide acceleration for neural network computing and signal processing workloads. ESP32-S3-WROOM-1 and ESP32-S3-WROOM-2 comes with a PCB antenna. ESP32-S3-WROOM-1U comes with an external antenna connector.
|
||||
* - 5 V to 3.3 V LDO
|
||||
- Power regulator that converts a 5 V supply into a 3.3 V output.
|
||||
* - Pin Headers
|
||||
- All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board for easy interfacing and programming. For details, please see :ref:`user-guide-s3-devkitc-1-v1.1-header-blocks`.
|
||||
* - USB-to-UART Port
|
||||
- A Micro-USB port used for power supply to the board, for flashing applications to the chip, as well as for communication with the chip via the on-board USB-to-UART bridge.
|
||||
* - Boot Button
|
||||
- Download button. Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port.
|
||||
* - Reset Button
|
||||
- Press this button to restart the system.
|
||||
* - USB Port
|
||||
- ESP32-S3 full-speed USB OTG interface, compliant with the USB 1.1 specification. The interface is used for power supply to the board, for flashing applications to the chip, for communication with the chip using USB 1.1 protocols, as well as for JTAG debugging.
|
||||
* - USB-to-UART Bridge
|
||||
- Single USB-to-UART bridge chip provides transfer rates up to 3 Mbps.
|
||||
* - RGB LED
|
||||
- Addressable RGB LED, driven by GPIO38.
|
||||
* - 3.3 V Power On LED
|
||||
- Turns on when the USB power is connected to the board.
|
||||
|
||||
.. note::
|
||||
|
||||
For boards with Octal SPI flash/PSRAM memory embedded ESP32-S3-WROOM-1/1U modules, and boards with ESP32-S3-WROOM-2 modules, the pins GPIO35, GPIO36 and GPIO37 are used for the internal communication between ESP32-S3 and SPI flash/PSRAM memory, thus not available for external use.
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your board, please make sure that it is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Required Hardware
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
- ESP32-S3-DevKitC-1
|
||||
- USB 2.0 cable (Standard-A to Micro-B)
|
||||
- Computer running Windows, Linux, or macOS
|
||||
|
||||
.. note::
|
||||
|
||||
Be sure to use an appropriate USB cable. Some cables are for charging only and do not provide the needed data lines nor work for programming the boards.
|
||||
|
||||
|
||||
Hardware Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Connect the board with the computer using **USB-to-UART Port** or **ESP32-S3 USB Port**. In subsequent steps, **USB-to-UART Port** will be used by default.
|
||||
|
||||
|
||||
Software Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Please proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment and then flash an application example onto your board.
|
||||
|
||||
|
||||
Contents and Packaging
|
||||
----------------------
|
||||
|
||||
Ordering Information
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
The development board has a variety of variants to choose from, as shown in the table below.
|
||||
|
||||
.. list-table::
|
||||
:widths: 28 29 19 17 15
|
||||
:header-rows: 1
|
||||
|
||||
* - Ordering Code
|
||||
- Module Integrated
|
||||
- Flash
|
||||
- PSRAM
|
||||
- SPI Voltage
|
||||
* - ESP32-S3-DevKitC-1-N8
|
||||
- ESP32-S3-WROOM-1-N8
|
||||
- 8 MB QD
|
||||
- —
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1-N8R2
|
||||
- ESP32-S3-WROOM-1-N8R2
|
||||
- 8 MB QD
|
||||
- 2 MB QD
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1-N8R8
|
||||
- ESP32-S3-WROOM-1-N8R8
|
||||
- 8 MB QD
|
||||
- 8 MB OT
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1-N16R8V
|
||||
- ESP32-S3-WROOM-2-N16R8V
|
||||
- 16 MB OT
|
||||
- 8 MB OT
|
||||
- 1.8 V
|
||||
* - ESP32-S3-DevKitC-1-N32R8V
|
||||
- ESP32-S3-WROOM-2-N32R8V
|
||||
- 32 MB OT
|
||||
- 8 MB OT
|
||||
- 1.8 V
|
||||
* - ESP32-S3-DevKitC-1U-N8
|
||||
- ESP32-S3-WROOM-1U-N8
|
||||
- 8 MB QD
|
||||
- —
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1U-N8R2
|
||||
- ESP32-S3-WROOM-1U-N8R2
|
||||
- 8 MB QD
|
||||
- 2 MB QD
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1U-N8R8
|
||||
- ESP32-S3-WROOM-1U-N8R8
|
||||
- 8 MB QD
|
||||
- 8 MB OT
|
||||
- 3.3 V
|
||||
|
||||
.. note::
|
||||
|
||||
In the table above, QD stands for Quad SPI and OT stands for Octal SPI.
|
||||
|
||||
|
||||
Retail Orders
|
||||
^^^^^^^^^^^^^
|
||||
|
||||
If you order a few samples, each board comes in an individual package in either antistatic bag or any packaging depending on your retailer.
|
||||
|
||||
For retail orders, please go to https://www.espressif.com/en/contact-us/get-samples.
|
||||
|
||||
|
||||
Wholesale Orders
|
||||
^^^^^^^^^^^^^^^^
|
||||
|
||||
If you order in bulk, the boards come in large cardboard boxes.
|
||||
|
||||
For wholesale orders, please go to https://www.espressif.com/en/contact-us/sales-questions.
|
||||
|
||||
|
||||
Hardware Reference
|
||||
==================
|
||||
|
||||
Block Diagram
|
||||
-------------
|
||||
|
||||
The block diagram below shows the components of ESP32-S3-DevKitC-1 and their interconnections.
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3-DevKitC-1_v2-SystemBlock.png
|
||||
:align: center
|
||||
:scale: 70%
|
||||
:alt: ESP32-S3-DevKitC-1 (click to enlarge)
|
||||
|
||||
ESP32-S3-DevKitC-1 (click to enlarge)
|
||||
|
||||
|
||||
Power Supply Options
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
There are three mutually exclusive ways to provide power to the board:
|
||||
|
||||
- USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended)
|
||||
- 5V and G (GND) pins
|
||||
- 3V3 and G (GND) pins
|
||||
|
||||
|
||||
.. _user-guide-s3-devkitc-1-v1.1-header-blocks:
|
||||
|
||||
Header Block
|
||||
------------
|
||||
|
||||
The two tables below provide the **Name** and **Function** of the pins on both sides of the board (J1 and J3). The pin names are shown in :ref:`user-guide-s3-devkitc-1-v1.1-board-front`. The numbering is the same as in the `Board Schematic <https://dl.espressif.com/dl/schematics/SCH_ESP32-S3-DevKitC-1_V1.1_20220413.pdf>`_ (PDF).
|
||||
|
||||
|
||||
J1
|
||||
^^^
|
||||
|
||||
=== ==== ========== ===================================
|
||||
No. Name Type [#]_ Function
|
||||
=== ==== ========== ===================================
|
||||
1 3V3 P 3.3 V power supply
|
||||
2 3V3 P 3.3 V power supply
|
||||
3 RST I EN
|
||||
4 4 I/O/T RTC_GPIO4, GPIO4, TOUCH4, ADC1_CH3
|
||||
5 5 I/O/T RTC_GPIO5, GPIO5, TOUCH5, ADC1_CH4
|
||||
6 6 I/O/T RTC_GPIO6, GPIO6, TOUCH6, ADC1_CH5
|
||||
7 7 I/O/T RTC_GPIO7, GPIO7, TOUCH7, ADC1_CH6
|
||||
8 15 I/O/T RTC_GPIO15, GPIO15, U0RTS, ADC2_CH4, XTAL_32K_P
|
||||
9 16 I/O/T RTC_GPIO16, GPIO16, U0CTS, ADC2_CH5, XTAL_32K_N
|
||||
10 17 I/O/T RTC_GPIO17, GPIO17, U1TXD, ADC2_CH6
|
||||
11 18 I/O/T RTC_GPIO18, GPIO18, U1RXD, ADC2_CH7, CLK_OUT3
|
||||
12 8 I/O/T RTC_GPIO8, GPIO8, TOUCH8, ADC1_CH7, SUBSPICS1
|
||||
13 3 I/O/T RTC_GPIO3, GPIO3, TOUCH3, ADC1_CH2
|
||||
14 46 I/O/T GPIO46
|
||||
15 9 I/O/T RTC_GPIO9, GPIO9, TOUCH9, ADC1_CH8, FSPIHD, SUBSPIHD
|
||||
16 10 I/O/T RTC_GPIO10, GPIO10, TOUCH10, ADC1_CH9, FSPICS0, FSPIIO4, SUBSPICS0
|
||||
17 11 I/O/T RTC_GPIO11, GPIO11, TOUCH11, ADC2_CH0, FSPID, FSPIIO5, SUBSPID
|
||||
18 12 I/O/T RTC_GPIO12, GPIO12, TOUCH12, ADC2_CH1, FSPICLK, FSPIIO6, SUBSPICLK
|
||||
19 13 I/O/T RTC_GPIO13, GPIO13, TOUCH13, ADC2_CH2, FSPIQ, FSPIIO7, SUBSPIQ
|
||||
20 14 I/O/T RTC_GPIO14, GPIO14, TOUCH14, ADC2_CH3, FSPIWP, FSPIDQS, SUBSPIWP
|
||||
21 5V P 5 V power supply
|
||||
22 G G Ground
|
||||
=== ==== ========== ===================================
|
||||
|
||||
|
||||
J3
|
||||
^^^
|
||||
|
||||
=== ==== ===== ====================================
|
||||
No. Name Type Function
|
||||
=== ==== ===== ====================================
|
||||
1 G G Ground
|
||||
2 TX I/O/T U0TXD, GPIO43, CLK_OUT1
|
||||
3 RX I/O/T U0RXD, GPIO44, CLK_OUT2
|
||||
4 1 I/O/T RTC_GPIO1, GPIO1, TOUCH1, ADC1_CH0
|
||||
5 2 I/O/T RTC_GPIO2, GPIO2, TOUCH2, ADC1_CH1
|
||||
6 42 I/O/T MTMS, GPIO42
|
||||
7 41 I/O/T MTDI, GPIO41, CLK_OUT1
|
||||
8 40 I/O/T MTDO, GPIO40, CLK_OUT2
|
||||
9 39 I/O/T MTCK, GPIO39, CLK_OUT3, SUBSPICS1
|
||||
10 38 I/O/T GPIO38, FSPIWP, SUBSPIWP, RGB LED
|
||||
11 37 I/O/T SPIDQS, GPIO37, FSPIQ, SUBSPIQ
|
||||
12 36 I/O/T SPIIO7, GPIO36, FSPICLK, SUBSPICLK
|
||||
13 35 I/O/T SPIIO6, GPIO35, FSPID, SUBSPID
|
||||
14 0 I/O/T RTC_GPIO0, GPIO0
|
||||
15 45 I/O/T GPIO45
|
||||
16 48 I/O/T GPIO48, SPICLK_N, SUBSPICLK_N_DIFF
|
||||
17 47 I/O/T GPIO47, SPICLK_P, SUBSPICLK_P_DIFF
|
||||
18 21 I/O/T RTC_GPIO21, GPIO21
|
||||
19 20 I/O/T RTC_GPIO20, GPIO20, U1CTS, ADC2_CH9, CLK_OUT1, USB_D+
|
||||
20 19 I/O/T RTC_GPIO19, GPIO19, U1RTS, ADC2_CH8, CLK_OUT2, USB_D-
|
||||
21 G G Ground
|
||||
22 G G Ground
|
||||
=== ==== ===== ====================================
|
||||
|
||||
|
||||
.. [#] P: Power supply; I: Input; O: Output; T: High impedance.
|
||||
|
||||
|
||||
For description of function names, please refer to `ESP32-S3 Series Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf>`_ (PDF).
|
||||
|
||||
|
||||
Pin Layout
|
||||
^^^^^^^^^^
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3_DevKitC-1_pinlayout_v1.1.jpg
|
||||
:align: center
|
||||
:scale: 50%
|
||||
:alt: ESP32-S3-DevKitC-1 (click to enlarge)
|
||||
|
||||
ESP32-S3-DevKitC-1 Pin Layout (click to enlarge)
|
||||
|
||||
|
||||
Hardware Revision Details
|
||||
=========================
|
||||
|
||||
:doc:`Initial release <user-guide-devkitc-1-v1.0>`
|
||||
|
||||
.. note::
|
||||
|
||||
Both the initial and v1.1 versions of ESP32-S3-DevKitC-1 are available on the market. The main difference lies in the GPIO assignment for the RGB LED: the initial version uses GPIO48, whereas v1.1 uses GPIO38.
|
||||
|
||||
|
||||
Related Documents
|
||||
=================
|
||||
|
||||
- `ESP32-S3 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf>`_ (PDF)
|
||||
- `ESP32-S3-WROOM-1 & ESP32-S3-WROOM-1U Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf>`_ (PDF)
|
||||
- `ESP32-S3-WROOM-2 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-2_datasheet_en.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 Schematic <https://dl.espressif.com/dl/schematics/SCH_ESP32-S3-DevKitC-1_V1.1_20221130.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 PCB layout <https://dl.espressif.com/dl/schematics/PCB_ESP32-S3-DevKitC-1_V1.1_20220429.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 Dimensions <https://dl.espressif.com/dl/schematics/esp_idf/DXF_ESP32-S3-DevKitC-1_V1.1_20220429.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 Dimensions source file <https://dl.espressif.com/dl/schematics/esp_idf/DXF_ESP32-S3-DevKitC-1_V1.1_20220429.dxf>`_ (DXF) - You can view it with `Autodesk Viewer <https://viewer.autodesk.com/>`_ online
|
||||
|
||||
For further design documentation for the board, please contact us at `sales@espressif.com <sales@espressif.com>`_.
|
||||
|
||||
.. toctree::
|
||||
:hidden:
|
||||
|
||||
user-guide-devkitc-1-v1.0
|
||||
@ -1,258 +0,0 @@
|
||||
==================
|
||||
ESP32-S3-DevKitM-1
|
||||
==================
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
This user guide will help you get started with ESP32-S3-DevKitM-1 and will also provide more in-depth information.
|
||||
|
||||
The ESP32-S3-DevKitM-1 is an entry-level development board equipped with either ESP32-S3-MINI-1 or ESP32-S3-MINI-1U, a module named for its small size. This board integrates complete Wi-Fi and Bluetooth® Low Energy functions.
|
||||
|
||||
Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitM-1 on a breadboard.
|
||||
|
||||
.. figure:: ../../../_static/esp32-s3-devkitm-1-v1-isometric.png
|
||||
:align: center
|
||||
:scale: 70%
|
||||
:alt: ESP32-S3-DevKitM-1 with ESP32-S3-MINI-1 Module
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S3-DevKitM-1 with ESP32-S3-MINI-1 Module
|
||||
|
||||
|
||||
The document consists of the following major sections:
|
||||
|
||||
- `Getting Started`_: Overview of the board and hardware/software setup instructions to get started.
|
||||
- `Hardware Reference`_: More detailed information about the board's hardware.
|
||||
- `Related Documents`_: Links to related documentation.
|
||||
|
||||
|
||||
Getting Started
|
||||
===============
|
||||
|
||||
This section provides a brief introduction of ESP32-S3-DevKitM-1, instructions on how to do the initial hardware setup and how to flash firmware onto it.
|
||||
|
||||
|
||||
Description of Components
|
||||
-------------------------
|
||||
|
||||
.. _user-guide-s3-devkitm-1-v1-board-front:
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3-DevKitM-1_v1-annotated-photo.png
|
||||
:align: center
|
||||
:alt: ESP32-S3-DevKitM-1 - front
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S3-DevKitM-1 - front
|
||||
|
||||
The key components of the board are described in a counter-clockwise direction, starting from the ESP32-S3-MINI-1/1U module.
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - ESP32-S3-MINI-1/1U
|
||||
- ESP32-S3-MINI-1 and ESP32-S3-MINI-1U are two general-purpose Wi-Fi and Bluetooth Low Energy combo modules that have a rich set of peripherals. ESP32-S3-MINI-1 comes with a PCB antenna. ESP32-S3-MINI-1U comes with an external antenna connector. At the core of the modules is ESP32-S3FN8, a chip equipped with an 8 MB flash. Since flash is packaged in the chip, rather than integrated into the module, ESP32-S3-MINI-1/1U has a smaller package size.
|
||||
* - 5 V to 3.3 V LDO
|
||||
- Power regulator that converts a 5 V supply into a 3.3 V output.
|
||||
* - Pin Headers
|
||||
- All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board for easy interfacing and programming. For details, please see :ref:`user-guide-s3-devkitm-1-v1-header-blocks`.
|
||||
* - USB-to-UART Port
|
||||
- A Micro-USB port used for power supply to the board, for flashing applications to the chip, as well as for communication with the chip via the on-board USB-to-UART bridge.
|
||||
* - Boot Button
|
||||
- Download button. Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port.
|
||||
* - Reset Button
|
||||
- Press this button to restart ESP32-S3.
|
||||
* - ESP32-S3 USB Port
|
||||
- ESP32-S3 full-speed USB OTG interface, compliant with the USB 1.1 specification. The interface is used for power supply to the board, for flashing applications to the chip, for communication with the chip using USB 1.1 protocols, as well as for JTAG debugging.
|
||||
* - USB-to-UART Bridge
|
||||
- Single USB-to-UART bridge chip provides transfer rates up to 3 Mbps.
|
||||
* - RGB LED
|
||||
- Addressable RGB LED, driven by GPIO48.
|
||||
* - 3.3 V Power On LED
|
||||
- Turns on when the USB power is connected to the board.
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your board, please make sure that it is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Required Hardware
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
- ESP32-S3-DevKitM-1
|
||||
- USB 2.0 cable (Standard-A to Micro-B)
|
||||
- Computer running Windows, Linux, or macOS
|
||||
|
||||
.. note::
|
||||
|
||||
Be sure to use an appropriate USB cable. Some cables are for charging only and do not provide the needed data lines nor work for programming the boards.
|
||||
|
||||
|
||||
Hardware Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Connect the board with the computer using **USB-to-UART Port** or **ESP32-S3 USB Port**. In subsequent steps, **USB-to-UART Port** will be used by default.
|
||||
|
||||
|
||||
Software Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Please proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment and then flash an application example onto your board.
|
||||
|
||||
|
||||
Contents and Packaging
|
||||
----------------------
|
||||
|
||||
Retail Orders
|
||||
^^^^^^^^^^^^^
|
||||
|
||||
If you order a few samples, each board comes in an individual package in either antistatic bag or any packaging depending on your retailer.
|
||||
|
||||
For retail orders, please go to https://www.espressif.com/en/contact-us/get-samples.
|
||||
|
||||
|
||||
Wholesale Orders
|
||||
^^^^^^^^^^^^^^^^
|
||||
|
||||
If you order in bulk, the boards come in large cardboard boxes.
|
||||
|
||||
For wholesale orders, please go to https://www.espressif.com/en/contact-us/sales-questions.
|
||||
|
||||
|
||||
Hardware Reference
|
||||
==================
|
||||
|
||||
Block Diagram
|
||||
-------------
|
||||
|
||||
The block diagram below shows the components of ESP32-S3-DevKitM-1 and their interconnections.
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3-DevKitM-1_v1_SystemBlock.png
|
||||
:align: center
|
||||
:scale: 70%
|
||||
:alt: ESP32-S3-DevKitM-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S3-DevKitM-1 (click to enlarge)
|
||||
|
||||
|
||||
Power Supply Options
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
There are three mutually exclusive ways to provide power to the board:
|
||||
|
||||
- USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended)
|
||||
- 5V and G (GND) pins
|
||||
- 3V3 and G (GND) pins
|
||||
|
||||
|
||||
.. _user-guide-s3-devkitm-1-v1-header-blocks:
|
||||
|
||||
Header Block
|
||||
------------
|
||||
|
||||
The two tables below provide the **Name** and **Function** of the pins on both sides of the board (J1 and J3). The pin names are shown in :ref:`user-guide-s3-devkitm-1-v1-board-front`. The numbering is the same as in the `Board Schematic <https://dl.espressif.com/dl/schematics/SCH_ESP32-S3-DEVKITM-1_V1_20210310A.pdf>`_ (PDF).
|
||||
|
||||
|
||||
J1
|
||||
^^^
|
||||
|
||||
=== ==== ========== ===================================
|
||||
No. Name Type [#]_ Function
|
||||
=== ==== ========== ===================================
|
||||
1 3V3 P 3.3 V power supply
|
||||
2 0 I/O/T RTC_GPIO0, GPIO0
|
||||
3 1 I/O/T RTC_GPIO1, GPIO1, TOUCH1, ADC1_CH0
|
||||
4 2 I/O/T RTC_GPIO2, GPIO2, TOUCH2, ADC1_CH1
|
||||
5 3 I/O/T RTC_GPIO3, GPIO3, TOUCH3, ADC1_CH2
|
||||
6 4 I/O/T RTC_GPIO4, GPIO4, TOUCH4, ADC1_CH3
|
||||
7 5 I/O/T RTC_GPIO5, GPIO5, TOUCH5, ADC1_CH4
|
||||
8 6 I/O/T RTC_GPIO6, GPIO6, TOUCH6, ADC1_CH5
|
||||
9 7 I/O/T RTC_GPIO7, GPIO7, TOUCH7, ADC1_CH6
|
||||
10 8 I/O/T RTC_GPIO8, GPIO8, TOUCH8, ADC1_CH7, SUBSPICS1
|
||||
11 9 I/O/T RTC_GPIO9, GPIO9, TOUCH9, ADC1_CH8, FSPIHD, SUBSPIHD
|
||||
12 10 I/O/T RTC_GPIO10, GPIO10, TOUCH10, ADC1_CH9, FSPICS0, FSPIIO4, SUBSPICS0
|
||||
13 11 I/O/T RTC_GPIO11, GPIO11, TOUCH11, ADC2_CH0, FSPID, FSPIIO5, SUBSPID
|
||||
14 12 I/O/T RTC_GPIO12, GPIO12, TOUCH12, ADC2_CH1, FSPICLK, FSPIIO6, SUBSPICLK
|
||||
15 13 I/O/T RTC_GPIO13, GPIO13, TOUCH13, ADC2_CH2, FSPIQ, FSPIIO7, SUBSPIQ
|
||||
16 14 I/O/T RTC_GPIO14, GPIO14, TOUCH14, ADC2_CH3, FSPIWP, FSPIDQS, SUBSPIWP
|
||||
17 15 I/O/T RTC_GPIO15, GPIO15, U0RTS, ADC2_CH4, XTAL_32K_P
|
||||
18 16 I/O/T RTC_GPIO16, GPIO16, U0CTS, ADC2_CH5, XTAL_32K_N
|
||||
19 17 I/O/T RTC_GPIO17, GPIO17, U1TXD, ADC2_CH6
|
||||
20 18 I/O/T RTC_GPIO18, GPIO18, U1RXD, ADC2_CH7, CLK_OUT3
|
||||
21 5V P 5 V power supply
|
||||
22 G G Ground
|
||||
=== ==== ========== ===================================
|
||||
|
||||
|
||||
J3
|
||||
^^^
|
||||
|
||||
=== ==== ===== ====================================
|
||||
No. Name Type Function
|
||||
=== ==== ===== ====================================
|
||||
1 G G Ground
|
||||
2 RST I EN
|
||||
3 46 I/O/T GPIO46
|
||||
4 45 I/O/T GPIO45
|
||||
5 RX I/O/T U0RXD, GPIO44, CLK_OUT2
|
||||
6 TX I/O/T U0TXD, GPIO43, CLK_OUT1
|
||||
7 42 I/O/T MTMS, GPIO42
|
||||
8 41 I/O/T MTDI, GPIO41, CLK_OUT1
|
||||
9 40 I/O/T MTDO, GPIO40, CLK_OUT2
|
||||
10 39 I/O/T MTCK, GPIO39, CLK_OUT3, SUBSPICS1
|
||||
11 38 I/O/T GPIO38, FSPIWP, SUBSPIWP
|
||||
12 37 I/O/T SPIDQS, GPIO37, FSPIQ, SUBSPIQ
|
||||
13 36 I/O/T SPIIO7, GPIO36, FSPICLK, SUBSPICLK
|
||||
14 35 I/O/T SPIIO6, GPIO35, FSPID, SUBSPID
|
||||
15 34 I/O/T SPIIO5, GPIO34, FSPICS0, SUBSPICS0
|
||||
16 33 I/O/T SPIIO4, GPIO33, FSPIHD, SUBSPIHD
|
||||
17 26 I/O/T SPICS1, GPIO26
|
||||
18 21 I/O/T RTC_GPIO21, GPIO21
|
||||
19 20 I/O/T RTC_GPIO20, GPIO20, U1CTS, ADC2_CH9, CLK_OUT1, USB_D+
|
||||
20 19 I/O/T RTC_GPIO19, GPIO19, U1RTS, ADC2_CH8, CLK_OUT2, USB_D-
|
||||
21 48 I/O/T SPICLK_N, GPIO48, SUBSPICLK_N_DIFF, RGB LED
|
||||
22 47 I/O/T SPICLK_P, GPIO47, SUBSPICLK_P_DIFF
|
||||
=== ==== ===== ====================================
|
||||
|
||||
|
||||
.. [#] P: Power supply; I: Input; O: Output; T: High impedance.
|
||||
|
||||
|
||||
|
||||
For description of function names, please refer to `ESP32-S3 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf>`_ (PDF).
|
||||
|
||||
|
||||
Pin Layout
|
||||
^^^^^^^^^^
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3_DevKitM-1_pinlayout.jpg
|
||||
:align: center
|
||||
:scale: 50%
|
||||
:alt: ESP32-S3-DevKitM-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S3-DevKitM-1 Pin Layout (click to enlarge)
|
||||
|
||||
|
||||
Hardware Revision Details
|
||||
=========================
|
||||
|
||||
This is the first revision of this board released.
|
||||
|
||||
|
||||
Related Documents
|
||||
=================
|
||||
|
||||
- `ESP32-S3 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf>`_ (PDF)
|
||||
- `ESP32-S3-MINI-1 & ESP32-S3-MINI-1U Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3-mini-1_mini-1u_datasheet_en.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitM-1 Schematic <https://dl.espressif.com/dl/schematics/SCH_ESP32-S3-DEVKITM-1_V1_20210310A.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitM-1 PCB layout <https://dl.espressif.com/dl/schematics/PCB_ESP32-S3-DevKitM-1_V1_20210310AC.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitM-1 Dimensions <https://dl.espressif.com/dl/schematics/DXF_ESP32-S3-DevKitM-1_V1_20210310AC.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitM-1 Dimensions source file <https://dl.espressif.com/dl/schematics/DXF_ESP32-S3-DevKitM-1_V1_20210310AC.dxf>`_ (DXF) - You can view it with `Autodesk Viewer <https://viewer.autodesk.com/>`_ online
|
||||
|
||||
For further design documentation for the board, please contact us at `sales@espressif.com <sales@espressif.com>`_.
|
||||
@ -120,7 +120,7 @@
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
ESP32-S2-Saola-1 <../hw-reference/esp32s2/user-guide-saola-1-v1.2>
|
||||
ESP32-S2-Saola-1 <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32s2/esp32-s2-saola-1/index.html>
|
||||
ESP32-S2-DevKitM-1 <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32s2/esp32-s2-devkitm-1/index.html>
|
||||
ESP32-S2-DevKitC-1 <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32s2/esp32-s2-devkitc-1/index.html>
|
||||
ESP32-S2-Kaluga-Kit <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32s2/esp32-s2-kaluga-1/index.html>
|
||||
@ -139,8 +139,8 @@
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
ESP32-S3-DevKitC-1 <../hw-reference/esp32s3/user-guide-devkitc-1>
|
||||
ESP32-S3-DevKitM-1 <../hw-reference/esp32s3/user-guide-devkitm-1>
|
||||
ESP32-S3-DevKitC-1 <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32s3/esp32-s3-devkitc-1/index.html>
|
||||
ESP32-S3-DevKitM-1 <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32s3/esp32-s3-devkitm-1/index.html>
|
||||
|
||||
.. only:: esp32c2
|
||||
|
||||
|
||||
@ -1,262 +0,0 @@
|
||||
================
|
||||
ESP32-S2-Saola-1
|
||||
================
|
||||
|
||||
:link_to_translation:`en: [English]`
|
||||
|
||||
本指南介绍了乐鑫一款基于 `ESP32-S2 <https://www.espressif.com/sites/default/files/documentation/esp32-s2_datasheet_cn.pdf>`_ 的小型开发板 ESP32-S2-Saola-1。
|
||||
|
||||
.. figure:: ../../../_static/esp32-s2-saola-1-v1.2-isometric.png
|
||||
:align: center
|
||||
:alt: ESP32-S2-Saola-1
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Saola-1
|
||||
|
||||
本指南包括如下内容：
|
||||
|
||||
- `入门指南`_：简要介绍了 ESP32-S2-Saola-1 和硬件、软件设置指南。
|
||||
- `硬件参考`_：详细介绍了 ESP32-S2-Saola-1 的硬件。
|
||||
- `硬件版本`_：介绍硬件历史版本和已知问题，并提供链接至历史版本开发板的入门指南（如有）。
|
||||
- `相关文档`_：列出了相关文档的链接。
|
||||
|
||||
|
||||
入门指南
|
||||
========
|
||||
|
||||
本节介绍了如何快速上手 ESP32-S2-Saola-1。开头部分介绍了 ESP32-S2-Saola-1，`开始开发应用`_ 小节介绍了怎样在 ESP32-S2-Saola-1 上安装模组、设置及烧录固件。
|
||||
|
||||
|
||||
概述
|
||||
----
|
||||
|
||||
ESP32-S2-Saola-1 是乐鑫一款基于 ESP32-S2 的小型开发板。板上的绝大部分管脚均已引出，开发人员可根据实际需求，轻松通过跳线连接多种外围器件，或将开发板插在面包板上使用。
|
||||
|
||||
为了更好地满足不同用户需求，ESP32-S2-Saola-1 支持以下模组：
|
||||
|
||||
- `ESP32-S2-WROVER <https://www.espressif.com/sites/default/files/documentation/esp32-s2-wrover_esp32-s2-wrover-i_datasheet_cn.pdf>`_
|
||||
- `ESP32-S2-WROVER-I <https://www.espressif.com/sites/default/files/documentation/esp32-s2-wrover_esp32-s2-wrover-i_datasheet_cn.pdf>`_
|
||||
- `ESP32-S2-WROOM <https://www.espressif.com/sites/default/files/documentation/esp32-s2-wroom_esp32-s2-wroom-i_datasheet_cn.pdf>`_
|
||||
- `ESP32-S2-WROOM-I <https://www.espressif.com/sites/default/files/documentation/esp32-s2-wroom_esp32-s2-wroom-i_datasheet_cn.pdf>`_
|
||||
|
||||
本指南以搭载 ESP32-S2-WROVER 模组的 ESP32-S2-Saola-1 为例。
|
||||
|
||||
|
||||
内含组件和包装
|
||||
--------------
|
||||
|
||||
零售订单
|
||||
^^^^^^^^
|
||||
|
||||
如购买样品，每个 ESP32-S2-Saola-1 开发板将以防静电袋或零售商选择的其他方式包装。
|
||||
|
||||
零售订单请前往 https://www.espressif.com/zh-hans/company/contact/buy-a-sample。
|
||||
|
||||
|
||||
批量订单
|
||||
^^^^^^^^
|
||||
|
||||
如批量购买，ESP32-S2-Saola-1 开发板将以大纸板箱包装。
|
||||
|
||||
批量订单请前往 https://www.espressif.com/zh-hans/contact-us/sales-questions。
|
||||
|
||||
|
||||
组件介绍
|
||||
--------
|
||||
|
||||
.. _user-guide-saola-1-v1.2-board-front:
|
||||
|
||||
.. figure:: ../../../_static/esp32-s2-saola-1-v1.2-annotated-photo.png
|
||||
:align: center
|
||||
:alt: ESP32-S2-Saola-1 - 正面
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Saola-1 - 正面
|
||||
|
||||
以下按照顺时针的顺序依次介绍开发板上的主要组件。
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 介绍
|
||||
* - ESP32-S2-WROVER
|
||||
- ESP32-S2-WROVER 集成 ESP32-S2，是通用型 Wi-Fi MCU 模组，功能强大。该模组采用 PCB 板载天线，配置了 4 MB SPI flash 和 2 MB SPI PSRAM。
|
||||
* - Pin Headers（排针）
|
||||
- 所有可用 GPIO 管脚（除 Flash 和 PSRAM 的 SPI 总线）均已引出至开发板的排针。用户可对 ESP32-S2 芯片编程，使能 SPI、I2S、UART、I2C、触摸传感器、PWM 等多种功能。
|
||||
* - 3.3 V Power On LED（3.3 V 电源指示灯）
|
||||
- 开发板连接 USB 电源后，该指示灯亮起。
|
||||
* - USB-to-UART Bridge（USB 转 UART 桥接器）
|
||||
- 单芯片 USB 至 UART 桥接器，可提供高达 3 Mbps 的传输速率。
|
||||
* - Reset Button（Reset 键）
|
||||
- 复位按键。
|
||||
* - Micro-USB Port（Micro-USB 接口）
|
||||
- USB 接口。可用作开发板的供电电源或 PC 和 ESP32-S2 芯片的通信接口。
|
||||
* - Boot Button（Boot 键）
|
||||
- 下载按键。按住 **Boot** 键的同时按一下 **Reset** 键进入“固件下载”模式，通过串口下载固件。
|
||||
* - RGB LED
|
||||
- 可寻址 RGB 发光二极管 (WS2812)，由 GPIO18 驱动。
|
||||
|
||||
|
||||
开始开发应用
|
||||
------------
|
||||
|
||||
通电前，请确保 ESP32-S2-Saola-1 完好无损。
|
||||
|
||||
|
||||
必备硬件
|
||||
^^^^^^^^
|
||||
|
||||
- ESP32-S2-Saola-1
|
||||
- USB 2.0 数据线（标准 A 型转 Micro-B 型）
|
||||
- 电脑（Windows、Linux 或 macOS）
|
||||
|
||||
.. 注解::
|
||||
|
||||
请确保使用适当的 USB 数据线。部分数据线仅可用于充电，无法用于数据传输和编程。
|
||||
|
||||
|
||||
软件设置
|
||||
^^^^^^^^
|
||||
|
||||
请前往 :doc:`../../get-started/index`，在 :ref:`get-started-step-by-step` 一节查看如何快速设置开发环境，将应用程序烧录至 ESP32-S2-Saola-1。
|
||||
|
||||
.. 注解::
|
||||
|
||||
ESP32-S2 系列芯片仅支持 ESP-IDF master 分支或 v4.2 以上版本。
|
||||
|
||||
|
||||
硬件参考
|
||||
========
|
||||
|
||||
功能框图
|
||||
--------
|
||||
|
||||
ESP32-S2-Saola-1 的主要组件和连接方式如下图所示。
|
||||
|
||||
.. figure:: ../../../_static/esp32-s2-saola-1-v1.2-block-diags.png
|
||||
:align: center
|
||||
:scale: 70%
|
||||
:alt: ESP32-S2-Saola-1 （点击放大）
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Saola-1 （点击放大）
|
||||
|
||||
|
||||
电源选项
|
||||
^^^^^^^^
|
||||
|
||||
以下任一供电方式均可给 ESP32-S2-Saola-1 供电：
|
||||
|
||||
- Micro-USB 接口供电（默认）
|
||||
- 5V 和 GND 排针供电
|
||||
- 3V3 和 GND 排针供电
|
||||
|
||||
建议选择第一种供电方式：Micro-USB 接口供电。
|
||||
|
||||
|
||||
排针
|
||||
----
|
||||
|
||||
下表列出了开发板两侧排针（J2 和 J3）的 **名称** 和 **功能**，排针的名称如图 :ref:`user-guide-saola-1-v1.2-board-front` 所示，排针的序号与 `ESP32-S2-Saola-1 原理图`_ (PDF) 一致。
|
||||
|
||||
|
||||
J2
|
||||
^^^
|
||||
|
||||
==== ==== ========= ======================================
|
||||
序号 名称 类型 [#]_ 功能
|
||||
==== ==== ========= ======================================
|
||||
1 3V3 P 3.3 V 电源
|
||||
2 IO0 I/O GPIO0, 启动
|
||||
3 IO1 I/O GPIO1, ADC1_CH0, TOUCH_CH1
|
||||
4 IO2 I/O GPIO2, ADC1_CH1, TOUCH_CH2
|
||||
5 IO3 I/O GPIO3, ADC1_CH2, TOUCH_CH3
|
||||
6 IO4 I/O GPIO4, ADC1_CH3, TOUCH_CH4
|
||||
7 IO5 I/O GPIO5, ADC1_CH4, TOUCH_CH5
|
||||
8 IO6 I/O GPIO6, ADC1_CH5, TOUCH_CH6
|
||||
9 IO7 I/O GPIO7, ADC1_CH6, TOUCH_CH7
|
||||
10 IO8 I/O GPIO8, ADC1_CH7, TOUCH_CH8
|
||||
11 IO9 I/O GPIO9, ADC1_CH8, TOUCH_CH9
|
||||
12 IO10 I/O GPIO10, ADC1_CH9, TOUCH_CH10
|
||||
13 IO11 I/O GPIO11, ADC2_CH0, TOUCH_CH11
|
||||
14 IO12 I/O GPIO12, ADC2_CH1, TOUCH_CH12
|
||||
15 IO13 I/O GPIO13, ADC2_CH2, TOUCH_CH13
|
||||
16 IO14 I/O GPIO14, ADC2_CH3, TOUCH_CH14
|
||||
17 IO15 I/O GPIO15, ADC2_CH4, XTAL_32K_P
|
||||
18 IO16 I/O GPIO16, ADC2_CH5, XTAL_32K_N
|
||||
19 IO17 I/O GPIO17, ADC2_CH6, DAC_1
|
||||
20 5V0 P 5 V 电源
|
||||
21 GND G 接地
|
||||
==== ==== ========= ======================================
|
||||
|
||||
|
||||
J3
|
||||
^^^
|
||||
|
||||
==== ==== ===== ====================================
|
||||
序号 名称 类型 功能
|
||||
==== ==== ===== ====================================
|
||||
1 GND G 接地
|
||||
2 RST I CHIP_PU, 复位
|
||||
3 IO46 I GPIO46
|
||||
4 IO45 I/O GPIO45
|
||||
5 IO44 I/O GPIO44, U0RXD
|
||||
6 IO43 I/O GPIO43, U0TXD
|
||||
7 IO42 I/O GPIO42, MTMS
|
||||
8 IO41 I/O GPIO41, MTDI
|
||||
9 IO40 I/O GPIO40, MTDO
|
||||
10 IO39 I/O GPIO39, MTCK
|
||||
11 IO38 I/O GPIO38
|
||||
12 IO37 I/O GPIO37
|
||||
13 IO36 I/O GPIO36
|
||||
14 IO35 I/O GPIO35
|
||||
16 IO34 I/O GPIO34
|
||||
17 IO33 I/O GPIO33
|
||||
17 IO26 I/O GPIO26
|
||||
18 IO21 I/O GPIO21
|
||||
19 IO20 I/O GPIO20, ADC2_CH9, USB_D+
|
||||
20 IO19 I/O GPIO19, ADC2_CH8, USB_D-
|
||||
21 IO18 I/O GPIO18, ADC2_CH7, DAC_2, RGB LED
|
||||
==== ==== ===== ====================================
|
||||
|
||||
.. [#] P：电源；I：输入；O：输出；T：可设置为高阻。
|
||||
|
||||
|
||||
管脚布局
|
||||
^^^^^^^^
|
||||
|
||||
.. figure:: ../../../_static/esp32-s2_saola1-pinout.jpg
|
||||
:align: center
|
||||
:scale: 45%
|
||||
:alt: ESP32-S2-Saola-1 管脚布局（点击放大）
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Saola-1 管脚布局（点击放大）
|
||||
|
||||
|
||||
硬件版本
|
||||
==========
|
||||
|
||||
无历史版本。
|
||||
|
||||
|
||||
相关文档
|
||||
========
|
||||
|
||||
* `ESP32-S2-Saola-1 原理图`_ (PDF)
|
||||
* `ESP32-S2-Saola-1 尺寸图`_ (PDF)
|
||||
* `ESP32-S2 技术规格书`_ (PDF)
|
||||
* `ESP32-S2-WROVER & ESP32-S2-WROVER-I 技术规格书`_ (PDF)
|
||||
* `ESP32-S2-WROOM & ESP32-S2-WROOM-I 技术规格书`_ (PDF)
|
||||
* `乐鑫产品选型工具`_
|
||||
|
||||
有关本开发板的更多设计文档，请联系我们的商务部门 `sales@espressif.com <sales@espressif.com>`_。
|
||||
|
||||
.. _ESP32-S2-Saola-1 原理图: https://dl.espressif.com/dl/schematics/ESP32-S2-SAOLA-1_V1.1_schematics.pdf
|
||||
.. _ESP32-S2-Saola-1 尺寸图: https://dl.espressif.com/dl/schematics/ESP32-S2-Saola-1_V1.2_Dimensions.pdf
|
||||
.. _ESP32-S2 技术规格书: https://www.espressif.com/sites/default/files/documentation/esp32-s2_datasheet_cn.pdf
|
||||
.. _ESP32-S2-WROVER & ESP32-S2-WROVER-I 技术规格书: https://www.espressif.com/sites/default/files/documentation/esp32-s2-wrover_esp32-s2-wrover-i_datasheet_cn.pdf
|
||||
.. _ESP32-S2-WROOM & ESP32-S2-WROOM-I 技术规格书: https://www.espressif.com/sites/default/files/documentation/esp32-s2-wroom_esp32-s2-wroom-i_datasheet_cn.pdf
|
||||
.. _乐鑫产品选型工具: https://products.espressif.com/#/product-selector?names=
|
||||
@ -1,320 +0,0 @@
|
||||
===================
|
||||
ESP32-S3-DevKitC-1
|
||||
===================
|
||||
|
||||
:link_to_translation:`en: [English]`
|
||||
|
||||
最新版本：:doc:`user-guide-devkitc-1`
|
||||
|
||||
本指南将帮助你快速上手 ESP32-S3-DevKitC-1，并提供该款开发板的详细信息。
|
||||
|
||||
ESP32-S3-DevKitC-1 是一款入门级开发板，搭载 Wi-Fi + Bluetooth® LE 模组 ESP32-S3-WROOM-1、ESP32-S3-WROOM-1U 或 ESP32-S3-WROOM-2。
|
||||
|
||||
板上模组的大部分管脚均已引出至开发板两侧排针，开发人员可根据实际需求，轻松通过跳线连接多种外围设备，也可将开发板插在面包板上使用。
|
||||
|
||||
.. figure:: ../../../_static/esp32-s3-devkitc-1-v1-isometric.png
|
||||
:align: center
|
||||
:alt: ESP32-S3-DevKitC-1（板载 ESP32-S3-WROOM-1 模组）
|
||||
|
||||
ESP32-S3-DevKitC-1（板载 ESP32-S3-WROOM-1 模组）
|
||||
|
||||
|
||||
本指南包括如下内容：
|
||||
|
||||
- `入门指南`_：简要介绍了开发板和硬件、软件设置指南。
|
||||
- `硬件参考`_：详细介绍了开发板的硬件。
|
||||
- `硬件版本`_：介绍硬件历史版本和已知问题，并提供链接至历史版本开发板的入门指南（如有）。
|
||||
- `相关文档`_：列出了相关文档的链接。
|
||||
|
||||
|
||||
入门指南
|
||||
========
|
||||
|
||||
本小节将简要介绍 ESP32-S3-DevKitC-1，说明如何在 ESP32-S3-DevKitC-1 上烧录固件及相关准备工作。
|
||||
|
||||
|
||||
组件介绍
|
||||
--------
|
||||
|
||||
.. _user-guide-s3-devkitc-1-v1-board-front:
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3-DevKitC-1_v2-annotated-photo.png
|
||||
:align: center
|
||||
:alt: ESP32-S3-DevKitC-1 - 正面
|
||||
|
||||
ESP32-S3-DevKitC-1 - 正面
|
||||
|
||||
以下按照逆时针的顺序依次介绍开发板上的主要组件。
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 介绍
|
||||
* - ESP32-S3-WROOM-1/1U/2
|
||||
- ESP32-S3-WROOM-1、ESP32-S3-WROOM-1U 和 ESP32-S3-WROOM-2 是通用型 Wi-Fi + 低功耗蓝牙 MCU 模组，具有丰富的外设接口、强大的神经网络运算能力和信号处理能力，专为人工智能和 AIoT 市场打造。ESP32-S3-WROOM-1 和 ESP32-S3-WROOM-2 采用 PCB 板载天线，ESP32-S3-WROOM-1U 采用连接器连接外部天线。
|
||||
* - 5 V to 3.3 V LDO（5 V 转 3.3 V LDO）
|
||||
- 电源转换器，输入 5 V，输出 3.3 V。
|
||||
* - Pin Headers（排针）
|
||||
- 所有可用 GPIO 管脚（除 flash 的 SPI 总线）均已引出至开发板的排针。请查看 :ref:`user-guide-s3-devkitc-1-v1-header-blocks` 获取更多信息。
|
||||
* - USB-to-UART Port（USB 转 UART 接口）
|
||||
- Micro-USB 接口，可用作开发板的供电接口，可烧录固件至芯片，也可作为通信接口，通过板载 USB 转 UART 桥接器与芯片通信。
|
||||
* - Boot Button（Boot 键）
|
||||
- 下载按键。按住 **Boot** 键的同时按一下 **Reset** 键进入“固件下载”模式，通过串口下载固件。
|
||||
* - Reset Button（Reset 键）
|
||||
- 复位按键。
|
||||
* - ESP32-S3 USB Port（ESP32-S3 USB 接口）
|
||||
- ESP32-S3 USB OTG 接口，支持全速 USB 1.1 标准。ESP32-S3 USB 接口可用作开发板的供电接口，可烧录固件至芯片，可通过 USB 协议与芯片通信，也可用于 JTAG 调试。
|
||||
* - USB-to-UART Bridge（USB 转 UART 桥接器）
|
||||
- 单芯片 USB 至 UART 桥接器，可提供高达 3 Mbps 的传输速率。
|
||||
* - RGB LED
|
||||
- 可寻址 RGB 发光二极管，由 GPIO48 驱动。
|
||||
* - 3.3 V Power On LED（3.3 V 电源指示灯）
|
||||
- 开发板连接 USB 电源后，该指示灯亮起。
|
||||
|
||||
.. note::
|
||||
|
||||
在板载 ESP32-S3-WROOM-1/1U 模组系列（使用 8 线 SPI flash/PSRAM）的开发板和板载 ESP32-S3-WROOM-2 模组系列的开发板中，管脚 GPIO35、GPIO36 和 GPIO37 已用于内部 ESP32-S3 芯片与 SPI flash/PSRAM 之间的通信，外部不可使用。
|
||||
|
||||
|
||||
开始开发应用
|
||||
-------------
|
||||
|
||||
通电前，请确保开发板完好无损。
|
||||
|
||||
|
||||
必备硬件
|
||||
^^^^^^^^
|
||||
|
||||
- ESP32-S3-DevKitC-1
|
||||
- USB 2.0 数据线（标准 A 型转 Micro-B 型）
|
||||
- 电脑（Windows、Linux 或 macOS）
|
||||
|
||||
.. 注解::
|
||||
|
||||
请确保使用适当的 USB 数据线。部分数据线仅可用于充电，无法用于数据传输和编程。
|
||||
|
||||
|
||||
硬件设置
|
||||
^^^^^^^^
|
||||
|
||||
通过 **USB 转 UART 接口** 连接开发板与电脑。软件暂不支持通过 **ESP32-S3 USB 接口** 连接。在后续步骤中，默认使用 **USB 转 UART 接口**。
|
||||
|
||||
|
||||
软件设置
|
||||
^^^^^^^^
|
||||
|
||||
请前往 :doc:`../../get-started/index`，在 :ref:`get-started-step-by-step` 小节查看如何快速设置开发环境，将应用程序烧录至你的开发板。
|
||||
|
||||
|
||||
内含组件和包装
|
||||
---------------
|
||||
|
||||
订购信息
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
该开发板有多种型号可供选择，详见下表。
|
||||
|
||||
.. list-table::
|
||||
:widths: 28 29 19 17 15
|
||||
:header-rows: 1
|
||||
|
||||
* - 订购代码
|
||||
- 搭载模组
|
||||
- Flash
|
||||
- PSRAM
|
||||
- SPI 电压
|
||||
* - ESP32-S3-DevKitC-1-N8
|
||||
- ESP32-S3-WROOM-1-N8
|
||||
- 8 MB QD
|
||||
- —
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1-N8R2
|
||||
- ESP32-S3-WROOM-1-N8R2
|
||||
- 8 MB QD
|
||||
- 2 MB QD
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1-N8R8
|
||||
- ESP32-S3-WROOM-1-N8R8
|
||||
- 8 MB QD
|
||||
- 8 MB OT
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1-N16R8V
|
||||
- ESP32-S3-WROOM-2-N16R8V
|
||||
- 16 MB OT
|
||||
- 8 MB OT
|
||||
- 1.8 V
|
||||
* - ESP32-S3-DevKitC-1-N32R8V
|
||||
- ESP32-S3-WROOM-2-N32R8V
|
||||
- 32 MB OT
|
||||
- 8 MB OT
|
||||
- 1.8 V
|
||||
* - ESP32-S3-DevKitC-1U-N8
|
||||
- ESP32-S3-WROOM-1U-N8
|
||||
- 8 MB QD
|
||||
- —
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1U-N8R2
|
||||
- ESP32-S3-WROOM-1U-N8R2
|
||||
- 8 MB QD
|
||||
- 2 MB QD
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1U-N8R8
|
||||
- ESP32-S3-WROOM-1U-N8R8
|
||||
- 8 MB QD
|
||||
- 8 MB OT
|
||||
- 3.3 V
|
||||
|
||||
.. note::
|
||||
|
||||
上表中，QD 指代 Quad SPI，OT 指代 Octal SPI。
|
||||
|
||||
|
||||
零售订单
|
||||
^^^^^^^^
|
||||
|
||||
如购买样品，每个开发板将以防静电袋或零售商选择的其他方式包装。
|
||||
|
||||
零售订单请前往 https://www.espressif.com/zh-hans/company/contact/buy-a-sample。
|
||||
|
||||
|
||||
批量订单
|
||||
^^^^^^^^
|
||||
|
||||
如批量购买，开发板将以大纸板箱包装。
|
||||
|
||||
批量订单请前往 https://www.espressif.com/zh-hans/contact-us/sales-questions。
|
||||
|
||||
|
||||
硬件参考
|
||||
========
|
||||
|
||||
功能框图
|
||||
--------
|
||||
|
||||
ESP32-S3-DevKitC-1 的主要组件和连接方式如下图所示。
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3-DevKitC-1_v2-SystemBlock.png
|
||||
:align: center
|
||||
:scale: 70%
|
||||
:alt: ESP32-S3-DevKitC-1（点击放大）
|
||||
|
||||
ESP32-S3-DevKitC-1（点击放大）
|
||||
|
||||
|
||||
电源选项
|
||||
^^^^^^^^
|
||||
|
||||
以下任一供电方式均可给开发板供电：
|
||||
|
||||
- USB 转 UART 接口供电或 ESP32-S3 USB 接口供电（选择其一或同时供电），默认供电方式（推荐）
|
||||
- 5V 和 G (GND) 排针供电
|
||||
- 3V3 和 G (GND) 排针供电
|
||||
|
||||
|
||||
.. _user-guide-s3-devkitc-1-v1-header-blocks:
|
||||
|
||||
排针
|
||||
----
|
||||
|
||||
下表列出了开发板两侧排针（J1 和 J3）的 **名称** 和 **功能**，排针的名称如图 :ref:`user-guide-s3-devkitc-1-v1-board-front` 所示，排针的序号与 `开发板原理图 <https://dl.espressif.com/dl/SCH_ESP32-S3-DEVKITC-1_V1_20210312C.pdf>`_ (PDF) 一致。
|
||||
|
||||
|
||||
J1
|
||||
^^^
|
||||
|
||||
==== ==== ========== =====================================================================
|
||||
序号 名称 类型 [#]_ 功能
|
||||
==== ==== ========== =====================================================================
|
||||
1 3V3 P 3.3 V 电源
|
||||
2 3V3 P 3.3 V 电源
|
||||
3 RST I EN
|
||||
4 4 I/O/T RTC_GPIO4, GPIO4, TOUCH4, ADC1_CH3
|
||||
5 5 I/O/T RTC_GPIO5, GPIO5, TOUCH5, ADC1_CH4
|
||||
6 6 I/O/T RTC_GPIO6, GPIO6, TOUCH6, ADC1_CH5
|
||||
7 7 I/O/T RTC_GPIO7, GPIO7, TOUCH7, ADC1_CH6
|
||||
8 15 I/O/T RTC_GPIO15, GPIO15, U0RTS, ADC2_CH4, XTAL_32K_P
|
||||
9 16 I/O/T RTC_GPIO16, GPIO16, U0CTS, ADC2_CH5, XTAL_32K_N
|
||||
10 17 I/O/T RTC_GPIO17, GPIO17, U1TXD, ADC2_CH6
|
||||
11 18 I/O/T RTC_GPIO18, GPIO18, U1RXD, ADC2_CH7, CLK_OUT3
|
||||
12 8 I/O/T RTC_GPIO8, GPIO8, TOUCH8, ADC1_CH7, SUBSPICS1
|
||||
13 3 I/O/T RTC_GPIO3, GPIO3, TOUCH3, ADC1_CH2
|
||||
14 46 I/O/T GPIO46
|
||||
15 9 I/O/T RTC_GPIO9, GPIO9, TOUCH9, ADC1_CH8, FSPIHD, SUBSPIHD
|
||||
16 10 I/O/T RTC_GPIO10, GPIO10, TOUCH10, ADC1_CH9, FSPICS0, FSPIIO4, SUBSPICS0
|
||||
17 11 I/O/T RTC_GPIO11, GPIO11, TOUCH11, ADC2_CH0, FSPID, FSPIIO5, SUBSPID
|
||||
18 12 I/O/T RTC_GPIO12, GPIO12, TOUCH12, ADC2_CH1, FSPICLK, FSPIIO6, SUBSPICLK
|
||||
19 13 I/O/T RTC_GPIO13, GPIO13, TOUCH13, ADC2_CH2, FSPIQ, FSPIIO7, SUBSPIQ
|
||||
20 14 I/O/T RTC_GPIO14, GPIO14, TOUCH14, ADC2_CH3, FSPIWP, FSPIDQS, SUBSPIWP
|
||||
21 5V P 5 V 电源
|
||||
22 G G 接地
|
||||
==== ==== ========== =====================================================================
|
||||
|
||||
|
||||
J3
|
||||
^^^
|
||||
|
||||
==== ==== ========== =====================================================================
|
||||
序号 名称 类型 功能
|
||||
==== ==== ========== =====================================================================
|
||||
1 G G 接地
|
||||
2 TX I/O/T U0TXD, GPIO43, CLK_OUT1
|
||||
3 RX I/O/T U0RXD, GPIO44, CLK_OUT2
|
||||
4 1 I/O/T RTC_GPIO1, GPIO1, TOUCH1, ADC1_CH0
|
||||
5 2 I/O/T RTC_GPIO2, GPIO2, TOUCH2, ADC1_CH1
|
||||
6 42 I/O/T MTMS, GPIO42
|
||||
7 41 I/O/T MTDI, GPIO41, CLK_OUT1
|
||||
8 40 I/O/T MTDO, GPIO40, CLK_OUT2
|
||||
9 39 I/O/T MTCK, GPIO39, CLK_OUT3, SUBSPICS1
|
||||
10 38 I/O/T GPIO38, FSPIWP, SUBSPIWP
|
||||
11 37 I/O/T SPIDQS, GPIO37, FSPIQ, SUBSPIQ
|
||||
12 36 I/O/T SPIIO7, GPIO36, FSPICLK, SUBSPICLK
|
||||
13 35 I/O/T SPIIO6, GPIO35, FSPID, SUBSPID
|
||||
14 0 I/O/T RTC_GPIO0, GPIO0
|
||||
15 45 I/O/T GPIO45
|
||||
16 48 I/O/T GPIO48, SPICLK_N, SUBSPICLK_N_DIFF, RGB LED
|
||||
17 47 I/O/T GPIO47, SPICLK_P, SUBSPICLK_P_DIFF
|
||||
18 21 I/O/T RTC_GPIO21, GPIO21
|
||||
19 20 I/O/T RTC_GPIO20, GPIO20, U1CTS, ADC2_CH9, CLK_OUT1, USB_D+
|
||||
20 19 I/O/T RTC_GPIO19, GPIO19, U1RTS, ADC2_CH8, CLK_OUT2, USB_D-
|
||||
21 G G 接地
|
||||
22 G G 接地
|
||||
==== ==== ========== =====================================================================
|
||||
|
||||
|
||||
.. [#] P：电源；I：输入；O：输出；T：可设置为高阻。
|
||||
|
||||
|
||||
有关管脚功能名称的解释，请参考 `芯片规格书 <https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_cn.pdf>`_ (PDF)。
|
||||
|
||||
|
||||
管脚布局
|
||||
^^^^^^^^^^^
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3_DevKitC-1_pinlayout.jpg
|
||||
:align: center
|
||||
:scale: 50%
|
||||
:alt: ESP32-S3-DevKitC-1（点击放大）
|
||||
|
||||
ESP32-S3-DevKitC-1 管脚布局（点击放大）
|
||||
|
||||
|
||||
硬件版本
|
||||
============
|
||||
|
||||
无历史版本。
|
||||
|
||||
|
||||
相关文档
|
||||
========
|
||||
|
||||
- `ESP32-S3 技术规格书 <https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_cn.pdf>`_ (PDF)
|
||||
- `ESP32-S3-WROOM-1 & ESP32-S3-WROOM-1U 技术规格书 <https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_cn.pdf>`_ (PDF)
|
||||
- `ESP32-S3-WROOM-2 技术规格书 <https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-2_datasheet_cn.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 原理图 <https://dl.espressif.com/dl/SCH_ESP32-S3-DEVKITC-1_V1_20210312C.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 PCB 布局图 <https://dl.espressif.com/dl/PCB_ESP32-S3-DevKitC-1_V1_20210312CB.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 尺寸图 <https://dl.espressif.com/dl/DXF_ESP32-S3-DevKitC-1_V1_20210312CB.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 尺寸图源文件 <https://dl.espressif.com/dl/DXF_ESP32-S3-DevKitC-1_V1_20210312CB.dxf>`_ (DXF) - 可使用 `Autodesk Viewer <https://viewer.autodesk.com/>`_ 查看
|
||||
|
||||
有关本开发板的更多设计文档，请联系我们的商务部门 `sales@espressif.com <sales@espressif.com>`_。
|
||||
@ -1,329 +0,0 @@
|
||||
========================
|
||||
ESP32-S3-DevKitC-1 v1.1
|
||||
========================
|
||||
|
||||
:link_to_translation:`en: [English]`
|
||||
|
||||
更早版本：:doc:`user-guide-devkitc-1-v1.0`
|
||||
|
||||
本指南将帮助你快速上手 ESP32-S3-DevKitC-1，并提供该款开发板的详细信息。
|
||||
|
||||
ESP32-S3-DevKitC-1 是一款入门级开发板，搭载 Wi-Fi + Bluetooth® LE 模组 ESP32-S3-WROOM-1、ESP32-S3-WROOM-1U 或 ESP32-S3-WROOM-2。
|
||||
|
||||
板上模组的大部分管脚均已引出至开发板两侧排针，开发人员可根据实际需求，轻松通过跳线连接多种外围设备，也可将开发板插在面包板上使用。
|
||||
|
||||
.. figure:: ../../../_static/esp32-s3-devkitc-1-v1.1-isometric.png
|
||||
:align: center
|
||||
:alt: ESP32-S3-DevKitC-1（板载 ESP32-S3-WROOM-1 模组）
|
||||
|
||||
ESP32-S3-DevKitC-1（板载 ESP32-S3-WROOM-1 模组）
|
||||
|
||||
|
||||
本指南包括如下内容：
|
||||
|
||||
- `入门指南`_：简要介绍了开发板和硬件、软件设置指南。
|
||||
- `硬件参考`_：详细介绍了开发板的硬件。
|
||||
- `硬件版本`_：介绍硬件历史版本和已知问题，并提供链接至历史版本开发板的入门指南（如有）。
|
||||
- `相关文档`_：列出了相关文档的链接。
|
||||
|
||||
|
||||
入门指南
|
||||
========
|
||||
|
||||
本小节将简要介绍 ESP32-S3-DevKitC-1，说明如何在 ESP32-S3-DevKitC-1 上烧录固件及相关准备工作。
|
||||
|
||||
|
||||
组件介绍
|
||||
--------
|
||||
|
||||
.. _user-guide-s3-devkitc-1-v1.1-board-front:
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3-DevKitC-1_v2-annotated-photo.png
|
||||
:align: center
|
||||
:alt: ESP32-S3-DevKitC-1 - 正面
|
||||
|
||||
ESP32-S3-DevKitC-1 - 正面
|
||||
|
||||
以下按照逆时针的顺序依次介绍开发板上的主要组件。
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 介绍
|
||||
* - ESP32-S3-WROOM-1/1U/2
|
||||
- ESP32-S3-WROOM-1、ESP32-S3-WROOM-1U 和 ESP32-S3-WROOM-2 是通用型 Wi-Fi + 低功耗蓝牙 MCU 模组，具有丰富的外设接口、强大的神经网络运算能力和信号处理能力，专为人工智能和 AIoT 市场打造。ESP32-S3-WROOM-1 和 ESP32-S3-WROOM-2 采用 PCB 板载天线，ESP32-S3-WROOM-1U 采用连接器连接外部天线。
|
||||
* - 5 V to 3.3 V LDO（5 V 转 3.3 V LDO）
|
||||
- 电源转换器，输入 5 V，输出 3.3 V。
|
||||
* - Pin Headers（排针）
|
||||
- 所有可用 GPIO 管脚（除 flash 的 SPI 总线）均已引出至开发板的排针。请查看 :ref:`user-guide-s3-devkitc-1-v1.1-header-blocks` 获取更多信息。
|
||||
* - USB-to-UART Port（USB 转 UART 接口）
|
||||
- Micro-USB 接口，可用作开发板的供电接口，可烧录固件至芯片，也可作为通信接口，通过板载 USB 转 UART 桥接器与芯片通信。
|
||||
* - Boot Button（Boot 键）
|
||||
- 下载按键。按住 **Boot** 键的同时按一下 **Reset** 键进入“固件下载”模式，通过串口下载固件。
|
||||
* - Reset Button（Reset 键）
|
||||
- 复位按键。
|
||||
* - USB Port（USB 接口）
|
||||
- ESP32-S3 USB OTG 接口，支持全速 USB 1.1 标准。ESP32-S3 USB 接口可用作开发板的供电接口，可烧录固件至芯片，可通过 USB 协议与芯片通信，也可用于 JTAG 调试。
|
||||
* - USB-to-UART Bridge（USB 转 UART 桥接器）
|
||||
- 单芯片 USB 至 UART 桥接器，可提供高达 3 Mbps 的传输速率。
|
||||
* - RGB LED
|
||||
- 可寻址 RGB 发光二极管，由 GPIO38 驱动。
|
||||
* - 3.3 V Power On LED（3.3 V 电源指示灯）
|
||||
- 开发板连接 USB 电源后，该指示灯亮起。
|
||||
|
||||
.. note::
|
||||
|
||||
在板载 ESP32-S3-WROOM-1/1U 模组系列（使用 8 线 SPI flash/PSRAM）的开发板和板载 ESP32-S3-WROOM-2 模组系列的开发板中，管脚 GPIO35、GPIO36 和 GPIO37 已用于内部 ESP32-S3 芯片与 SPI flash/PSRAM 之间的通信，外部不可使用。
|
||||
|
||||
|
||||
开始开发应用
|
||||
-------------
|
||||
|
||||
通电前，请确保开发板完好无损。
|
||||
|
||||
|
||||
必备硬件
|
||||
^^^^^^^^
|
||||
|
||||
- ESP32-S3-DevKitC-1
|
||||
- USB 2.0 数据线（标准 A 型转 Micro-B 型）
|
||||
- 电脑（Windows、Linux 或 macOS）
|
||||
|
||||
.. 注解::
|
||||
|
||||
请确保使用适当的 USB 数据线。部分数据线仅可用于充电，无法用于数据传输和编程。
|
||||
|
||||
|
||||
硬件设置
|
||||
^^^^^^^^
|
||||
|
||||
通过 **USB 转 UART 接口** 或 **ESP32-S3 USB 接口** 连接开发板与电脑。在后续步骤中，默认使用 **USB 转 UART 接口**。
|
||||
|
||||
|
||||
软件设置
|
||||
^^^^^^^^
|
||||
|
||||
请前往 :doc:`../../get-started/index`，在 :ref:`get-started-step-by-step` 小节查看如何快速设置开发环境，将应用程序烧录至你的开发板。
|
||||
|
||||
|
||||
内含组件和包装
|
||||
---------------
|
||||
|
||||
订购信息
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
该开发板有多种型号可供选择，详见下表。
|
||||
|
||||
.. list-table::
|
||||
:widths: 28 29 19 17 15
|
||||
:header-rows: 1
|
||||
|
||||
* - 订购代码
|
||||
- 搭载模组
|
||||
- Flash
|
||||
- PSRAM
|
||||
- SPI 电压
|
||||
* - ESP32-S3-DevKitC-1-N8
|
||||
- ESP32-S3-WROOM-1-N8
|
||||
- 8 MB QD
|
||||
- —
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1-N8R2
|
||||
- ESP32-S3-WROOM-1-N8R2
|
||||
- 8 MB QD
|
||||
- 2 MB QD
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1-N8R8
|
||||
- ESP32-S3-WROOM-1-N8R8
|
||||
- 8 MB QD
|
||||
- 8 MB OT
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1-N16R8V
|
||||
- ESP32-S3-WROOM-2-N16R8V
|
||||
- 16 MB OT
|
||||
- 8 MB OT
|
||||
- 1.8 V
|
||||
* - ESP32-S3-DevKitC-1-N32R8V
|
||||
- ESP32-S3-WROOM-2-N32R8V
|
||||
- 32 MB OT
|
||||
- 8 MB OT
|
||||
- 1.8 V
|
||||
* - ESP32-S3-DevKitC-1U-N8
|
||||
- ESP32-S3-WROOM-1U-N8
|
||||
- 8 MB QD
|
||||
- —
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1U-N8R2
|
||||
- ESP32-S3-WROOM-1U-N8R2
|
||||
- 8 MB QD
|
||||
- 2 MB QD
|
||||
- 3.3 V
|
||||
* - ESP32-S3-DevKitC-1U-N8R8
|
||||
- ESP32-S3-WROOM-1U-N8R8
|
||||
- 8 MB QD
|
||||
- 8 MB OT
|
||||
- 3.3 V
|
||||
|
||||
.. note::
|
||||
|
||||
上表中，QD 指代 Quad SPI，OT 指代 Octal SPI。
|
||||
|
||||
|
||||
零售订单
|
||||
^^^^^^^^
|
||||
|
||||
如购买样品，每个开发板将以防静电袋或零售商选择的其他方式包装。
|
||||
|
||||
零售订单请前往 https://www.espressif.com/zh-hans/company/contact/buy-a-sample。
|
||||
|
||||
|
||||
批量订单
|
||||
^^^^^^^^
|
||||
|
||||
如批量购买，开发板将以大纸板箱包装。
|
||||
|
||||
批量订单请前往 https://www.espressif.com/zh-hans/contact-us/sales-questions。
|
||||
|
||||
|
||||
硬件参考
|
||||
========
|
||||
|
||||
功能框图
|
||||
--------
|
||||
|
||||
ESP32-S3-DevKitC-1 的主要组件和连接方式如下图所示。
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3-DevKitC-1_v2-SystemBlock.png
|
||||
:align: center
|
||||
:scale: 70%
|
||||
:alt: ESP32-S3-DevKitC-1（点击放大）
|
||||
|
||||
ESP32-S3-DevKitC-1（点击放大）
|
||||
|
||||
|
||||
电源选项
|
||||
^^^^^^^^
|
||||
|
||||
以下任一供电方式均可给开发板供电：
|
||||
|
||||
- USB 转 UART 接口供电或 ESP32-S3 USB 接口供电（选择其一或同时供电），默认供电方式（推荐）
|
||||
- 5V 和 G (GND) 排针供电
|
||||
- 3V3 和 G (GND) 排针供电
|
||||
|
||||
|
||||
.. _user-guide-s3-devkitc-1-v1.1-header-blocks:
|
||||
|
||||
排针
|
||||
----
|
||||
|
||||
下表列出了开发板两侧排针（J1 和 J3）的 **名称** 和 **功能**，排针的名称如图 :ref:`user-guide-s3-devkitc-1-v1.1-board-front` 所示，排针的序号与 `开发板原理图 <https://dl.espressif.com/dl/schematics/SCH_ESP32-S3-DevKitC-1_V1.1_20220413.pdf>`_ (PDF) 一致。
|
||||
|
||||
|
||||
J1
|
||||
^^^
|
||||
|
||||
==== ==== ========== =====================================================================
|
||||
序号 名称 类型 [#]_ 功能
|
||||
==== ==== ========== =====================================================================
|
||||
1 3V3 P 3.3 V 电源
|
||||
2 3V3 P 3.3 V 电源
|
||||
3 RST I EN
|
||||
4 4 I/O/T RTC_GPIO4, GPIO4, TOUCH4, ADC1_CH3
|
||||
5 5 I/O/T RTC_GPIO5, GPIO5, TOUCH5, ADC1_CH4
|
||||
6 6 I/O/T RTC_GPIO6, GPIO6, TOUCH6, ADC1_CH5
|
||||
7 7 I/O/T RTC_GPIO7, GPIO7, TOUCH7, ADC1_CH6
|
||||
8 15 I/O/T RTC_GPIO15, GPIO15, U0RTS, ADC2_CH4, XTAL_32K_P
|
||||
9 16 I/O/T RTC_GPIO16, GPIO16, U0CTS, ADC2_CH5, XTAL_32K_N
|
||||
10 17 I/O/T RTC_GPIO17, GPIO17, U1TXD, ADC2_CH6
|
||||
11 18 I/O/T RTC_GPIO18, GPIO18, U1RXD, ADC2_CH7, CLK_OUT3
|
||||
12 8 I/O/T RTC_GPIO8, GPIO8, TOUCH8, ADC1_CH7, SUBSPICS1
|
||||
13 3 I/O/T RTC_GPIO3, GPIO3, TOUCH3, ADC1_CH2
|
||||
14 46 I/O/T GPIO46
|
||||
15 9 I/O/T RTC_GPIO9, GPIO9, TOUCH9, ADC1_CH8, FSPIHD, SUBSPIHD
|
||||
16 10 I/O/T RTC_GPIO10, GPIO10, TOUCH10, ADC1_CH9, FSPICS0, FSPIIO4, SUBSPICS0
|
||||
17 11 I/O/T RTC_GPIO11, GPIO11, TOUCH11, ADC2_CH0, FSPID, FSPIIO5, SUBSPID
|
||||
18 12 I/O/T RTC_GPIO12, GPIO12, TOUCH12, ADC2_CH1, FSPICLK, FSPIIO6, SUBSPICLK
|
||||
19 13 I/O/T RTC_GPIO13, GPIO13, TOUCH13, ADC2_CH2, FSPIQ, FSPIIO7, SUBSPIQ
|
||||
20 14 I/O/T RTC_GPIO14, GPIO14, TOUCH14, ADC2_CH3, FSPIWP, FSPIDQS, SUBSPIWP
|
||||
21 5V P 5 V 电源
|
||||
22 G G 接地
|
||||
==== ==== ========== =====================================================================
|
||||
|
||||
|
||||
J3
|
||||
^^^
|
||||
|
||||
==== ==== ========== =====================================================================
|
||||
序号 名称 类型 功能
|
||||
==== ==== ========== =====================================================================
|
||||
1 G G 接地
|
||||
2 TX I/O/T U0TXD, GPIO43, CLK_OUT1
|
||||
3 RX I/O/T U0RXD, GPIO44, CLK_OUT2
|
||||
4 1 I/O/T RTC_GPIO1, GPIO1, TOUCH1, ADC1_CH0
|
||||
5 2 I/O/T RTC_GPIO2, GPIO2, TOUCH2, ADC1_CH1
|
||||
6 42 I/O/T MTMS, GPIO42
|
||||
7 41 I/O/T MTDI, GPIO41, CLK_OUT1
|
||||
8 40 I/O/T MTDO, GPIO40, CLK_OUT2
|
||||
9 39 I/O/T MTCK, GPIO39, CLK_OUT3, SUBSPICS1
|
||||
10 38 I/O/T GPIO38, FSPIWP, SUBSPIWP, RGB LED
|
||||
11 37 I/O/T SPIDQS, GPIO37, FSPIQ, SUBSPIQ
|
||||
12 36 I/O/T SPIIO7, GPIO36, FSPICLK, SUBSPICLK
|
||||
13 35 I/O/T SPIIO6, GPIO35, FSPID, SUBSPID
|
||||
14 0 I/O/T RTC_GPIO0, GPIO0
|
||||
15 45 I/O/T GPIO45
|
||||
16 48 I/O/T GPIO48, SPICLK_N, SUBSPICLK_N_DIFF
|
||||
17 47 I/O/T GPIO47, SPICLK_P, SUBSPICLK_P_DIFF
|
||||
18 21 I/O/T RTC_GPIO21, GPIO21
|
||||
19 20 I/O/T RTC_GPIO20, GPIO20, U1CTS, ADC2_CH9, CLK_OUT1, USB_D+
|
||||
20 19 I/O/T RTC_GPIO19, GPIO19, U1RTS, ADC2_CH8, CLK_OUT2, USB_D-
|
||||
21 G G 接地
|
||||
22 G G 接地
|
||||
==== ==== ========== =====================================================================
|
||||
|
||||
|
||||
.. [#] P：电源；I：输入；O：输出；T：可设置为高阻。
|
||||
|
||||
|
||||
有关管脚功能名称的解释，请参考 `ESP32-S3 技术规格书 <https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_cn.pdf>`_ (PDF)。
|
||||
|
||||
|
||||
管脚布局
|
||||
^^^^^^^^^^^
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3_DevKitC-1_pinlayout_v1.1.jpg
|
||||
:align: center
|
||||
:scale: 50%
|
||||
:alt: ESP32-S3-DevKitC-1（点击放大）
|
||||
|
||||
ESP32-S3-DevKitC-1 管脚布局（点击放大）
|
||||
|
||||
|
||||
硬件版本
|
||||
============
|
||||
|
||||
:doc:`首次发布 <user-guide-devkitc-1-v1.0>`
|
||||
|
||||
.. note::
|
||||
|
||||
目前首次发布和 v1.1 版本的开发板均可订购，两个版本的主要差异在于 RGB LED 所连接的管脚不同。首次发布版本的 RGB LED 连接到 GPIO48，而 v1.1 版本的 RGB LED 连接到 GPIO38。
|
||||
|
||||
|
||||
相关文档
|
||||
========
|
||||
|
||||
- `ESP32-S3 技术规格书 <https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_cn.pdf>`_ (PDF)
|
||||
- `ESP32-S3-WROOM-1 & ESP32-S3-WROOM-1U 技术规格书 <https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_cn.pdf>`_ (PDF)
|
||||
- `ESP32-S3-WROOM-2 技术规格书 <https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-2_datasheet_cn.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 原理图 <https://dl.espressif.com/dl/schematics/SCH_ESP32-S3-DevKitC-1_V1.1_20221130.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 PCB 布局图 <https://dl.espressif.com/dl/schematics/PCB_ESP32-S3-DevKitC-1_V1.1_20220429.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 尺寸图 <https://dl.espressif.com/dl/schematics/esp_idf/DXF_ESP32-S3-DevKitC-1_V1.1_20220429.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitC-1 尺寸图源文件 <https://dl.espressif.com/dl/schematics/esp_idf/DXF_ESP32-S3-DevKitC-1_V1.1_20220429.dxf>`_ (DXF) - 可使用 `Autodesk Viewer <https://viewer.autodesk.com/>`_ 查看
|
||||
|
||||
有关本开发板的更多设计文档，请联系我们的商务部门 `sales@espressif.com <sales@espressif.com>`_。
|
||||
|
||||
.. toctree::
|
||||
:hidden:
|
||||
|
||||
user-guide-devkitc-1-v1.0
|
||||
@ -1,258 +0,0 @@
|
||||
===================
|
||||
ESP32-S3-DevKitM-1
|
||||
===================
|
||||
|
||||
:link_to_translation:`en: [English]`
|
||||
|
||||
本指南将帮助你快速上手 ESP32-S3-DevKitM-1，并提供该款开发板的详细信息。
|
||||
|
||||
ESP32-S3-DevKitM-1 是一款入门级开发板，搭载的是 Wi-Fi+蓝牙 LE 模组 ESP32-S3-MINI-1 或 ESP32-S3-MINI-1U，该款模组因小尺寸而得名。
|
||||
|
||||
板上模组的大部分管脚均已引出至开发板两侧排针，开发人员可根据实际需求，轻松通过跳线连接多种外围设备，也可将开发板插在面包板上使用。
|
||||
|
||||
.. figure:: ../../../_static/esp32-s3-devkitm-1-v1-isometric.png
|
||||
:align: center
|
||||
:scale: 70%
|
||||
:alt: ESP32-S3-DevKitM-1（板载 ESP32-S3-MINI-1 模组）
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S3-DevKitM-1（板载 ESP32-S3-MINI-1 模组）
|
||||
|
||||
|
||||
本指南包括如下内容：
|
||||
|
||||
- `入门指南`_：简要介绍了开发板和硬件、软件设置指南。
|
||||
- `硬件参考`_：详细介绍了开发板的硬件。
|
||||
- `相关文档`_：列出了相关文档的链接。
|
||||
|
||||
|
||||
入门指南
|
||||
========
|
||||
|
||||
本小节将简要介绍 ESP32-S3-DevKitM-1，说明如何在 ESP32-S3-DevKitM-1 上烧录固件及相关准备工作。
|
||||
|
||||
|
||||
组件介绍
|
||||
--------
|
||||
|
||||
.. _user-guide-s3-devkitm-1-v1-board-front:
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3-DevKitM-1_v1-annotated-photo.png
|
||||
:align: center
|
||||
:alt: ESP32-S3-DevKitM-1 - 正面
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S3-DevKitM-1 - 正面
|
||||
|
||||
以下按照逆时针的顺序依次介绍开发板上的主要组件。
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 介绍
|
||||
* - ESP32-S3-MINI-1/1U
|
||||
- ESP32-S3-MINI-1 和 ESP32-S3-MINI-1U 是通用型 Wi-Fi + 低功耗蓝牙 MCU 模组，具有丰富的外设接口。ESP32-S3-MINI-1 采用 PCB 板载天线，ESP32-S3-MINI-1U 采用连接器连接外部天线。两款模组的核心是 ESP32-S3FN8 芯片。该芯片带有 8 MB flash，由于 flash 直接封装在芯片中，因此 ESP32-S3-MINI-1/1U 模组具有较小的封装尺寸。
|
||||
* - 5 V to 3.3 V LDO（5 V 转 3.3 V LDO）
|
||||
- 电源转换器，输入 5 V，输出 3.3 V。
|
||||
* - Pin Headers（排针）
|
||||
- 所有可用 GPIO 管脚（除 flash 的 SPI 总线）均已引出至开发板的排针。请查看 :ref:`user-guide-s3-DevKitM-1-header-blocks` 获取更多信息。
|
||||
* - USB-to-UART Port（USB 转 UART 接口）
|
||||
- Micro-USB 接口，可用作开发板的供电接口，可烧录固件至芯片，也可作为通信接口，通过板载 USB 转 UART 桥接器与芯片通信。
|
||||
* - Boot Button（Boot 键）
|
||||
- 下载按键。按住 **Boot** 键的同时按一下 **Reset** 键进入“固件下载”模式，通过串口下载固件。
|
||||
* - Reset Button（Reset 键）
|
||||
- 复位按键。
|
||||
* - ESP32-S3 USB Port（ESP32-S3 USB 接口）
|
||||
- ESP32-S3 USB OTG 接口，支持全速 USB 1.1 标准。ESP32-S3 USB 接口可用作开发板的供电接口，可烧录固件至芯片，可通过 USB 协议与芯片通信，也可用于 JTAG 调试。
|
||||
* - USB-to-UART Bridge（USB 转 UART 桥接器）
|
||||
- 单芯片 USB 至 UART 桥接器，可提供高达 3 Mbps 的传输速率。
|
||||
* - RGB LED
|
||||
- 可寻址 RGB 发光二极管，由 GPIO48 驱动。
|
||||
* - 3.3 V Power On LED（3.3 V 电源指示灯）
|
||||
- 开发板连接 USB 电源后，该指示灯亮起。
|
||||
|
||||
|
||||
开始开发应用
|
||||
-------------
|
||||
|
||||
通电前，请确保开发板完好无损。
|
||||
|
||||
|
||||
必备硬件
|
||||
^^^^^^^^
|
||||
|
||||
- ESP32-S3-DevKitM-1
|
||||
- USB 2.0 数据线（标准 A 型转 Micro-B 型）
|
||||
- 电脑（Windows、Linux 或 macOS）
|
||||
|
||||
.. 注解::
|
||||
|
||||
请确保使用适当的 USB 数据线。部分数据线仅可用于充电，无法用于数据传输和编程。
|
||||
|
||||
|
||||
硬件设置
|
||||
^^^^^^^^
|
||||
|
||||
通过 **USB 转 UART 接口** 或 **ESP32-S3 USB 接口** 连接开发板与电脑。在后续步骤中，默认使用 **USB 转 UART 接口**。
|
||||
|
||||
|
||||
软件设置
|
||||
^^^^^^^^
|
||||
|
||||
请前往 :doc:`../../get-started/index`，在 :ref:`get-started-step-by-step` 小节查看如何快速设置开发环境，将应用程序烧录至你的开发板。
|
||||
|
||||
|
||||
内含组件和包装
|
||||
---------------
|
||||
|
||||
零售订单
|
||||
^^^^^^^^
|
||||
|
||||
如购买样品，每个开发板将以防静电袋或零售商选择的其他方式包装。
|
||||
|
||||
零售订单请前往 https://www.espressif.com/zh-hans/company/contact/buy-a-sample。
|
||||
|
||||
|
||||
批量订单
|
||||
^^^^^^^^
|
||||
|
||||
如批量购买，开发板将以大纸板箱包装。
|
||||
|
||||
批量订单请前往 https://www.espressif.com/zh-hans/contact-us/sales-questions。
|
||||
|
||||
|
||||
硬件参考
|
||||
========
|
||||
|
||||
功能框图
|
||||
--------
|
||||
|
||||
ESP32-S3-DevKitM-1 的主要组件和连接方式如下图所示。
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3-DevKitM-1_v1_SystemBlock.png
|
||||
:align: center
|
||||
:scale: 70%
|
||||
:alt: ESP32-S3-DevKitM-1（点击放大）
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S3-DevKitM-1（点击放大）
|
||||
|
||||
|
||||
电源选项
|
||||
^^^^^^^^
|
||||
|
||||
以下任一供电方式均可给开发板供电：
|
||||
|
||||
- USB 转 UART 接口供电或 ESP32-S3 USB 接口供电（选择其一或同时供电），默认供电方式（推荐）
|
||||
- 5V 和 G (GND) 排针供电
|
||||
- 3V3 和 G (GND) 排针供电
|
||||
|
||||
|
||||
.. _user-guide-s3-DevKitM-1-header-blocks:
|
||||
|
||||
排针
|
||||
----
|
||||
|
||||
下表列出了开发板两侧排针（J1 和 J3）的 **名称** 和 **功能**，排针的名称如图 :ref:`user-guide-s3-devkitm-1-v1-board-front` 所示，排针的序号与 `开发板原理图 <https://dl.espressif.com/dl/schematics/SCH_ESP32-S3-DEVKITM-1_V1_20210310A.pdf>`_ (PDF) 一致。
|
||||
|
||||
|
||||
J1
|
||||
^^^
|
||||
|
||||
==== ==== ========== =====================================================================
|
||||
序号 名称 类型 [#]_ 功能
|
||||
==== ==== ========== =====================================================================
|
||||
1 3V3 P 3.3 V 电源
|
||||
2 0 I/O/T RTC_GPIO0, GPIO0
|
||||
3 1 I/O/T RTC_GPIO1, GPIO1, TOUCH1, ADC1_CH0
|
||||
4 2 I/O/T RTC_GPIO2, GPIO2, TOUCH2, ADC1_CH1
|
||||
5 3 I/O/T RTC_GPIO3, GPIO3, TOUCH3, ADC1_CH2
|
||||
6 4 I/O/T RTC_GPIO4, GPIO4, TOUCH4, ADC1_CH3
|
||||
7 5 I/O/T RTC_GPIO5, GPIO5, TOUCH5, ADC1_CH4
|
||||
8 6 I/O/T RTC_GPIO6, GPIO6, TOUCH6, ADC1_CH5
|
||||
9 7 I/O/T RTC_GPIO7, GPIO7, TOUCH7, ADC1_CH6
|
||||
10 8 I/O/T RTC_GPIO8, GPIO8, TOUCH8, ADC1_CH7, SUBSPICS1
|
||||
11 9 I/O/T RTC_GPIO9, GPIO9, TOUCH9, ADC1_CH8, FSPIHD, SUBSPIHD
|
||||
12 10 I/O/T RTC_GPIO10, GPIO10, TOUCH10, ADC1_CH9, FSPICS0, FSPIIO4, SUBSPICS0
|
||||
13 11 I/O/T RTC_GPIO11, GPIO11, TOUCH11, ADC2_CH0, FSPID, FSPIIO5, SUBSPID
|
||||
14 12 I/O/T RTC_GPIO12, GPIO12, TOUCH12, ADC2_CH1, FSPICLK, FSPIIO6, SUBSPICLK
|
||||
15 13 I/O/T RTC_GPIO13, GPIO13, TOUCH13, ADC2_CH2, FSPIQ, FSPIIO7, SUBSPIQ
|
||||
16 14 I/O/T RTC_GPIO14, GPIO14, TOUCH14, ADC2_CH3, FSPIWP, FSPIDQS, SUBSPIWP
|
||||
17 15 I/O/T RTC_GPIO15, GPIO15, U0RTS, ADC2_CH4, XTAL_32K_P
|
||||
18 16 I/O/T RTC_GPIO16, GPIO16, U0CTS, ADC2_CH5, XTAL_32K_N
|
||||
19 17 I/O/T RTC_GPIO17, GPIO17, U1TXD, ADC2_CH6
|
||||
20 18 I/O/T RTC_GPIO18, GPIO18, U1RXD, ADC2_CH7, CLK_OUT3
|
||||
21 5V P 5 V 电源
|
||||
22 G G 接地
|
||||
==== ==== ========== =====================================================================
|
||||
|
||||
|
||||
J3
|
||||
^^^
|
||||
|
||||
==== ==== ========== =====================================================================
|
||||
序号 名称 类型 功能
|
||||
==== ==== ========== =====================================================================
|
||||
1 G G 接地
|
||||
2 RST I EN
|
||||
3 46 I/O/T GPIO46
|
||||
4 45 I/O/T GPIO45
|
||||
5 RX I/O/T U0RXD, GPIO44, CLK_OUT2
|
||||
6 TX I/O/T U0TXD, GPIO43, CLK_OUT1
|
||||
7 42 I/O/T MTMS, GPIO42
|
||||
8 41 I/O/T MTDI, GPIO41, CLK_OUT1
|
||||
9 40 I/O/T MTDO, GPIO40, CLK_OUT2
|
||||
10 39 I/O/T MTCK, GPIO39, CLK_OUT3, SUBSPICS1
|
||||
11 38 I/O/T GPIO38, FSPIWP, SUBSPIWP
|
||||
12 37 I/O/T SPIDQS, GPIO37, FSPIQ, SUBSPIQ
|
||||
13 36 I/O/T SPIIO7, GPIO36, FSPICLK, SUBSPICLK
|
||||
14 35 I/O/T SPIIO6, GPIO35, FSPID, SUBSPID
|
||||
15 34 I/O/T SPIIO5, GPIO34, FSPICS0, SUBSPICS0
|
||||
16 33 I/O/T SPIIO4, GPIO33, FSPIHD, SUBSPIHD
|
||||
17 26 I/O/T SPICS1, GPIO26
|
||||
18 21 I/O/T RTC_GPIO21, GPIO21
|
||||
19 20 I/O/T RTC_GPIO20, GPIO20, U1CTS, ADC2_CH9, CLK_OUT1, USB_D+
|
||||
20 19 I/O/T RTC_GPIO19, GPIO19, U1RTS, ADC2_CH8, CLK_OUT2, USB_D-
|
||||
21 48 I/O/T SPICLK_N, GPIO48, SUBSPICLK_N_DIFF, RGB LED
|
||||
22 47 I/O/T SPICLK_P, GPIO47, SUBSPICLK_P_DIFF
|
||||
==== ==== ========== =====================================================================
|
||||
|
||||
|
||||
.. [#] P：电源；I：输入；O：输出；T：可设置为高阻。
|
||||
|
||||
|
||||
|
||||
有关管脚功能名称的解释，请参考 `ESP32-S3 技术规格书 <https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_cn.pdf>`_ (PDF)。
|
||||
|
||||
|
||||
管脚布局
|
||||
^^^^^^^^^^^
|
||||
|
||||
.. figure:: ../../../_static/ESP32-S3_DevKitM-1_pinlayout.jpg
|
||||
:align: center
|
||||
:scale: 50%
|
||||
:alt: ESP32-S3-DevKitM-1（点击放大）
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S3-DevKitM-1 管脚布局（点击放大）
|
||||
|
||||
|
||||
硬件版本
|
||||
============
|
||||
|
||||
无历史版本。
|
||||
|
||||
|
||||
相关文档
|
||||
========
|
||||
|
||||
- `ESP32-S3 技术规格书 <https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_cn.pdf>`_ (PDF)
|
||||
- `ESP32-S3-MINI-1 & ESP32-S3-MINI-1U 技术规格书 <https://www.espressif.com/sites/default/files/documentation/esp32-s3-mini-1_mini-1u_datasheet_cn.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitM-1 原理图 <https://dl.espressif.com/dl/schematics/SCH_ESP32-S3-DEVKITM-1_V1_20210310A.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitM-1 PCB 布局图 <https://dl.espressif.com/dl/schematics/PCB_ESP32-S3-DevKitM-1_V1_20210310AC.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitM-1 尺寸图 <https://dl.espressif.com/dl/schematics/DXF_ESP32-S3-DevKitM-1_V1_20210310AC.pdf>`_ (PDF)
|
||||
- `ESP32-S3-DevKitM-1 尺寸图源文件 <https://dl.espressif.com/dl/schematics/DXF_ESP32-S3-DevKitM-1_V1_20210310AC.dxf>`_ (DXF) - 可使用 `Autodesk Viewer <https://viewer.autodesk.com/>`_ 查看
|
||||
|
||||
有关本开发板的更多设计文档，请联系我们的商务部门 `sales@espressif.com <sales@espressif.com>`_。
|
||||
Loading…
x
Reference in New Issue
Block a user