blackbeard420/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf synced 2025-03-10 01:29:21 -04:00
Code Issues Projects Releases Wiki Activity

refactor(bod): Rename kconfig.bod to kconfig.power

Browse Source
This commit is contained in:
C.S.M 2025-01-15 11:41:35 +08:00
parent 8563c2fc46
commit 349d1dbd33
22 changed files with 778 additions and 628 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

64
components/esp_hw_support/power_supply/port/esp32/Kconfig.bod
View File

@ -1,64 +0,0 @@
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_0
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each ESP chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_0
bool "2.43V +/- 0.05"
config ESP_BROWNOUT_DET_LVL_SEL_1
bool "2.48V +/- 0.05"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "2.58V +/- 0.05"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "2.62V +/- 0.05"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.67V +/- 0.05"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.70V +/- 0.05"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.77V +/- 0.05"
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.80V +/- 0.05"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 0 if ESP_BROWNOUT_DET_LVL_SEL_0
default 1 if ESP_BROWNOUT_DET_LVL_SEL_1
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
Two occasions need to restart the chip with interrupt so far.
(1). For ESP32 version 1, brown-out reset function doesn't work (see ESP32 errata 3.4).
So that we must restart from interrupt.
(2). For special workflow, the chip needs do more things instead of restarting directly. This part
needs to be done in callback function of interrupt.
endmenu

68
components/esp_hw_support/power_supply/port/esp32/Kconfig.power Normal file
View File

@ -0,0 +1,68 @@
menu "Power Supplier"
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_0
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each ESP chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_0
bool "2.43V +/- 0.05"
config ESP_BROWNOUT_DET_LVL_SEL_1
bool "2.48V +/- 0.05"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "2.58V +/- 0.05"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "2.62V +/- 0.05"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.67V +/- 0.05"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.70V +/- 0.05"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.77V +/- 0.05"
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.80V +/- 0.05"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 0 if ESP_BROWNOUT_DET_LVL_SEL_0
default 1 if ESP_BROWNOUT_DET_LVL_SEL_1
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
Two occasions need to restart the chip with interrupt so far.
(1). For ESP32 version 1, brown-out reset function doesn't work (see ESP32 errata 3.4).
So that we must restart from interrupt.
(2). For special workflow, the chip needs do more things instead of restarting directly. This part
needs to be done in callback function of interrupt.
endmenu
endmenu

55
components/esp_hw_support/power_supply/port/esp32c2/Kconfig.bod
View File

@ -1,55 +0,0 @@
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-C2 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_7
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.51V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.64V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.76V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.92V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "3.10V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "3.27V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu

59
components/esp_hw_support/power_supply/port/esp32c2/Kconfig.power Normal file
View File

@ -0,0 +1,59 @@
menu "Power Supplier"
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-C2 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_7
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.51V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.64V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.76V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.92V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "3.10V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "3.27V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu
endmenu

55
components/esp_hw_support/power_supply/port/esp32c3/Kconfig.bod
View File

@ -1,55 +0,0 @@
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-C3 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_7
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.51V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.64V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.76V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.92V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "3.10V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "3.27V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu

59
components/esp_hw_support/power_supply/port/esp32c3/Kconfig.power Normal file
View File

@ -0,0 +1,59 @@
menu "Power Supplier"
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-C3 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_7
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.51V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.64V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.76V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.92V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "3.10V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "3.27V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu
endmenu

55
components/esp_hw_support/power_supply/port/esp32c5/Kconfig.bod
View File

@ -1,55 +0,0 @@
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA && SOC_BOD_SUPPORTED
default y
help
The ESP32-C5 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_7
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.51V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.64V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.76V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.92V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "3.10V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "3.27V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu

59
components/esp_hw_support/power_supply/port/esp32c5/Kconfig.power Normal file
View File

@ -0,0 +1,59 @@
menu "Power Supplier"
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-C5 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_7
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.51V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.64V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.76V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.92V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "3.10V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "3.27V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu
endmenu

55
components/esp_hw_support/power_supply/port/esp32c6/Kconfig.bod
View File

@ -1,55 +0,0 @@
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-C6 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_7
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.51V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.64V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.76V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.92V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "3.10V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "3.27V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu

59
components/esp_hw_support/power_supply/port/esp32c6/Kconfig.power Normal file
View File

@ -0,0 +1,59 @@
menu "Power Supplier"
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-C6 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_7
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.51V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.64V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.76V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.92V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "3.10V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "3.27V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu
endmenu

55
components/esp_hw_support/power_supply/port/esp32c61/Kconfig.bod
View File

@ -1,55 +0,0 @@
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-C61 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_7
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.51V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.64V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.76V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.92V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "3.10V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "3.27V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu

59
components/esp_hw_support/power_supply/port/esp32c61/Kconfig.power Normal file
View File

@ -0,0 +1,59 @@
menu "Power Supplier"
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-C61 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_7
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.51V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.64V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.76V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.92V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "3.10V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "3.27V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu
endmenu

61
components/esp_hw_support/power_supply/port/esp32h2/Kconfig.bod
View File

@ -1,61 +0,0 @@
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-H2 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_0
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.94V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.88V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.83V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.78V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "2.73V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "2.67V"
config ESP_BROWNOUT_DET_LVL_SEL_1
bool "2.62V"
config ESP_BROWNOUT_DET_LVL_SEL_0
bool "2.57V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 0 if ESP_BROWNOUT_DET_LVL_SEL_0
default 1 if ESP_BROWNOUT_DET_LVL_SEL_1
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu

65
components/esp_hw_support/power_supply/port/esp32h2/Kconfig.power Normal file
View File

@ -0,0 +1,65 @@
menu "Power Supplier"
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-H2 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_0
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.94V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.88V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.83V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.78V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "2.73V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "2.67V"
config ESP_BROWNOUT_DET_LVL_SEL_1
bool "2.62V"
config ESP_BROWNOUT_DET_LVL_SEL_0
bool "2.57V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 0 if ESP_BROWNOUT_DET_LVL_SEL_0
default 1 if ESP_BROWNOUT_DET_LVL_SEL_1
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu
endmenu

61
components/esp_hw_support/power_supply/port/esp32h21/Kconfig.bod
View File

@ -1,61 +0,0 @@
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-H21 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_0
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.94V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.88V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.83V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.78V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "2.73V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "2.67V"
config ESP_BROWNOUT_DET_LVL_SEL_1
bool "2.62V"
config ESP_BROWNOUT_DET_LVL_SEL_0
bool "2.57V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 0 if ESP_BROWNOUT_DET_LVL_SEL_0
default 1 if ESP_BROWNOUT_DET_LVL_SEL_1
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu

65
components/esp_hw_support/power_supply/port/esp32h21/Kconfig.power Normal file
View File

@ -0,0 +1,65 @@
menu "Power Supplier"
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-H21 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_0
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.94V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.88V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.83V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.78V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "2.73V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "2.67V"
config ESP_BROWNOUT_DET_LVL_SEL_1
bool "2.62V"
config ESP_BROWNOUT_DET_LVL_SEL_0
bool "2.57V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 0 if ESP_BROWNOUT_DET_LVL_SEL_0
default 1 if ESP_BROWNOUT_DET_LVL_SEL_1
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu
endmenu

49
components/esp_hw_support/power_supply/port/esp32p4/Kconfig.bod
View File

@ -1,49 +0,0 @@
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-P4 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
default ESP_BROWNOUT_DET_LVL_SEL_7
depends on ESP_BROWNOUT_DET
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
Please note that this config is only valid when P4 SOC version is above v1.0. When you are using a
earlier P4 SOC version (v0.x), the brownout value should be fixed around 2.52V and not configurable.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.6V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.52V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.42V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu

159
components/esp_hw_support/power_supply/port/esp32p4/Kconfig.power Normal file
View File

@ -0,0 +1,159 @@
menu "Power Supplier"
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-P4 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
default ESP_BROWNOUT_DET_LVL_SEL_7
depends on ESP_BROWNOUT_DET
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each chip.
Please note that this config is only valid when P4 SOC version is above v1.0. When you are using a
earlier P4 SOC version (v0.x), the brownout value should be fixed around 2.52V and not configurable.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.6V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.52V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.42V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu
menu "RTC Backup Battery"
config ESP_VBAT_INIT_AUTO
bool "Enable VBAT power supply for RTC battery"
default n
depends on SOC_VBAT_SUPPORTED
help
Enable this option to allow the use of a button cell battery to power the RTC (Real-Time Clock) domain.
When this option is enabled, the hardware will configure VBAT as the power supply source for the RTC.
- Ensure a compatible battery (2.5V ~ 3.6V) is connected to the VBAT pin.
- The VBAT battery provides power to retain RTC state and keep low-power peripherals active
during deep sleep.
- When this option is disabled, the RTC battery input (VBAT) must not be left floating.
config ESP_VBAT_USE_RECHARGEABLE_BATTERY
bool "The battery for RTC battery is a rechargeable battery"
default n
depends on ESP_VBAT_INIT_AUTO
help
Select this option if the RTC backup battery used in your design is a rechargeable battery.
When enabled, the system will configure the RTC battery management circuitry to operate
in a mode suitable for charging a rechargeable battery. This includes enabling
charging current regulation via resistor and voltage monitoring to ensure safe and efficient charging.
Use this option carefully to avoid damage to non-rechargeable batteries.
choice ESP_VBAT_DET_LVL_LOW_SEL
prompt "VBAT start charging voltage level"
default ESP_VBAT_DET_LVL_LOW_SEL_6
depends on ESP_VBAT_USE_RECHARGEABLE_BATTERY
help
The brownout detector will start charging when the supply voltage drops below the selected threshold.
This ensures that the power supply is maintained at a stable level.
config ESP_VBAT_DET_LVL_LOW_SEL_7
bool "2.6V"
config ESP_VBAT_DET_LVL_LOW_SEL_6
bool "2.52V"
config ESP_VBAT_DET_LVL_LOW_SEL_5
bool "2.42V"
endchoice
choice ESP_VBAT_DET_LVL_HIGH_SEL
prompt "VBAT stop charging voltage level"
default ESP_VBAT_DET_LVL_HIGH_SEL_7
depends on ESP_VBAT_USE_RECHARGEABLE_BATTERY
help
The brownout detector will stop charging when the supply voltage arrives the selected threshold.
config ESP_VBAT_DET_LVL_HIGH_SEL_7
bool "2.6V"
config ESP_VBAT_DET_LVL_HIGH_SEL_6
bool "2.52V"
config ESP_VBAT_DET_LVL_HIGH_SEL_5
bool "2.42V"
endchoice
choice ESP_VBAT_BROWNOUT_DET_LVL_SEL
prompt "VBAT brownout voltage level"
default ESP_VBAT_BROWNOUT_DET_LVL_SEL_5
depends on ESP_VBAT_INIT_AUTO
help
The brownout detector will git a brownout signal when vbat brownout detected.
config ESP_VBAT_BROWNOUT_DET_LVL_SEL_7
bool "2.6V"
config ESP_VBAT_BROWNOUT_DET_LVL_SEL_6
bool "2.52V"
config ESP_VBAT_BROWNOUT_DET_LVL_SEL_5
bool "2.42V"
endchoice
config ESP_VBAT_DET_LVL_LOW
int
depends on ESP_VBAT_USE_RECHARGEABLE_BATTERY
default 5 if ESP_VBAT_DET_LVL_LOW_SEL_5
default 6 if ESP_VBAT_DET_LVL_LOW_SEL_6
default 7 if ESP_VBAT_DET_LVL_LOW_SEL_7
config ESP_VBAT_DET_LVL_HIGH
int
depends on ESP_VBAT_USE_RECHARGEABLE_BATTERY
default 5 if ESP_VBAT_DET_LVL_HIGH_SEL_5
default 6 if ESP_VBAT_DET_LVL_HIGH_SEL_6
default 7 if ESP_VBAT_DET_LVL_HIGH_SEL_7
config ESP_VBAT_BROWNOUT_DET_LVL
int
default 5 if ESP_VBAT_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_VBAT_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_VBAT_BROWNOUT_DET_LVL_SEL_7
config ESP_VBAT_CHARGER_CIRCUIT_RESISTOR_VAL
int "vbat charger circuit resistor value (ohms), should be multiple of 500"
depends on ESP_VBAT_USE_RECHARGEABLE_BATTERY
range 1000 8500
default 1000
help
The resistor value of charger circuit.
endmenu
endmenu

59
components/esp_hw_support/power_supply/port/esp32s2/Kconfig.bod
View File

@ -1,59 +0,0 @@
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-S2 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_7
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each ESP3-S2 chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.44V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.56V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.67V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.84V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "2.98V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "3.19V"
config ESP_BROWNOUT_DET_LVL_SEL_1
bool "3.30V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 1 if ESP_BROWNOUT_DET_LVL_SEL_1
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu

63
components/esp_hw_support/power_supply/port/esp32s2/Kconfig.power Normal file
View File

@ -0,0 +1,63 @@
menu "Power Supplier"
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-S2 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_7
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each ESP3-S2 chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.44V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.56V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.67V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.84V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "2.98V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "3.19V"
config ESP_BROWNOUT_DET_LVL_SEL_1
bool "3.30V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 1 if ESP_BROWNOUT_DET_LVL_SEL_1
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu
endmenu

59
components/esp_hw_support/power_supply/port/esp32s3/Kconfig.bod
View File

@ -1,59 +0,0 @@
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-S3 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_7
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each ESP3-S3 chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.44V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.56V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.67V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.84V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "2.98V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "3.19V"
config ESP_BROWNOUT_DET_LVL_SEL_1
bool "3.30V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 1 if ESP_BROWNOUT_DET_LVL_SEL_1
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu

63
components/esp_hw_support/power_supply/port/esp32s3/Kconfig.power Normal file
View File

@ -0,0 +1,63 @@
menu "Power Supplier"
menu "Brownout Detector"
config ESP_BROWNOUT_DET
bool "Hardware brownout detect & reset"
depends on !IDF_ENV_FPGA
default y
help
The ESP32-S3 has a built-in brownout detector which can detect if the voltage is lower than
a specific value. If this happens, it will reset the chip in order to prevent unintended
behaviour.
choice ESP_BROWNOUT_DET_LVL_SEL
prompt "Brownout voltage level"
depends on ESP_BROWNOUT_DET
default ESP_BROWNOUT_DET_LVL_SEL_7
help
The brownout detector will reset the chip when the supply voltage is approximately
below this level. Note that there may be some variation of brownout voltage level
between each ESP3-S3 chip.
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
#of the brownout threshold levels.
config ESP_BROWNOUT_DET_LVL_SEL_7
bool "2.44V"
config ESP_BROWNOUT_DET_LVL_SEL_6
bool "2.56V"
config ESP_BROWNOUT_DET_LVL_SEL_5
bool "2.67V"
config ESP_BROWNOUT_DET_LVL_SEL_4
bool "2.84V"
config ESP_BROWNOUT_DET_LVL_SEL_3
bool "2.98V"
config ESP_BROWNOUT_DET_LVL_SEL_2
bool "3.19V"
config ESP_BROWNOUT_DET_LVL_SEL_1
bool "3.30V"
endchoice
config ESP_BROWNOUT_DET_LVL
int
default 1 if ESP_BROWNOUT_DET_LVL_SEL_1
default 2 if ESP_BROWNOUT_DET_LVL_SEL_2
default 3 if ESP_BROWNOUT_DET_LVL_SEL_3
default 4 if ESP_BROWNOUT_DET_LVL_SEL_4
default 5 if ESP_BROWNOUT_DET_LVL_SEL_5
default 6 if ESP_BROWNOUT_DET_LVL_SEL_6
default 7 if ESP_BROWNOUT_DET_LVL_SEL_7
config ESP_BROWNOUT_USE_INTR
bool
default n
help
This config allows to trigger an interrupt when brownout detected. Software restart will be done
at the end of the default callback.
This is because for some special workflow, the chip needs do more things when brownout happens
before restart instead of restarting directly. This part needs to be done in callback function
of interrupt.
endmenu
endmenu