From c820d8181ca7ff62b2fc58af927ba9a85fb72f82 Mon Sep 17 00:00:00 2001 From: Linda Date: Mon, 15 May 2023 14:14:20 +0800 Subject: [PATCH] docs: fix a typo in api-guides/usb-otg-console --- docs/en/api-guides/usb-otg-console.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/en/api-guides/usb-otg-console.rst b/docs/en/api-guides/usb-otg-console.rst index 7cee710a60..b3df7d3395 100644 --- a/docs/en/api-guides/usb-otg-console.rst +++ b/docs/en/api-guides/usb-otg-console.rst @@ -67,14 +67,14 @@ Once the initial upload is done, the application will start up and a USB CDC por Initial upload using the ROM download mode, over USB CDC ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -* Press {IDF_TARGET_NAME} into download mode. To do this, keep GPIO0 low while toggling reset. On many development boards, the "Boot" button is connected to GPIO0, and you can press "Reset" button while holding "Boot". +* Place {IDF_TARGET_NAME} into download mode. To do this, keep GPIO0 low while toggling reset. On many development boards, the "Boot" button is connected to GPIO0, and you can press "Reset" button while holding "Boot". * A serial port will appear in the system. On most operating systems (Windows 8 and later, Linux, macOS) driver installation is not required. Find the port name using Device Manager (Windows) or by listing ``/dev/ttyACM*`` devices on Linux or ``/dev/cu*`` devices on macOS. * Run ``idf.py flash -p PORT`` to upload the application, with ``PORT`` determined in the previous step. Initial upload using the ROM download mode, over USB DFU ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -* Press {IDF_TARGET_NAME} into download mode. To do this, keep GPIO0 low while toggling reset. On many development boards, the "Boot" button is connected to GPIO0, and you can press "Reset" button while holding "Boot". +* Place {IDF_TARGET_NAME} into download mode. To do this, keep GPIO0 low while toggling reset. On many development boards, the "Boot" button is connected to GPIO0, and you can press "Reset" button while holding "Boot". * Run ``idf.py dfu-flash``. See :ref:`api_guide_dfu_flash` for details about DFU flashing.