diff --git a/components/esp_phy/include/esp_private/phy.h b/components/esp_phy/include/esp_private/phy.h
index 1489ac889b..367da95c79 100644
--- a/components/esp_phy/include/esp_private/phy.h
+++ b/components/esp_phy/include/esp_private/phy.h
@@ -36,7 +36,7 @@ void phy_get_romfunc_addr(void);
  * @param[in] init_data Initialization parameters to be used by the PHY
  * @param[inout] cal_data As input, calibration data previously obtained. As output, will contain new calibration data.
  * @param[in] cal_mode  RF calibration mode
- * @return ESP_CAL_DATA_CHECK_FAIL if calibration data checksum fails, other values are reserved for future use
+ * @return ESP_CAL_DATA_CHECK_FAIL if the calibration data checksum fails or if the calibration data is outdated, other values are reserved for future use
  */
 int register_chipv7_phy(const esp_phy_init_data_t* init_data, esp_phy_calibration_data_t *cal_data, esp_phy_calibration_mode_t cal_mode);
 
diff --git a/components/esp_phy/src/phy_init.c b/components/esp_phy/src/phy_init.c
index 9f85684d89..bc8d28bf3f 100644
--- a/components/esp_phy/src/phy_init.c
+++ b/components/esp_phy/src/phy_init.c
@@ -929,7 +929,7 @@ void esp_phy_load_cal_and_init(void)
     memcpy(cal_data->mac, sta_mac, 6);
     esp_err_t ret = register_chipv7_phy(init_data, cal_data, calibration_mode);
     if (ret == ESP_CAL_DATA_CHECK_FAIL) {
-        ESP_LOGW(TAG, "saving new calibration data because of checksum failure, mode(%d)", calibration_mode);
+        ESP_LOGI(TAG, "Saving new calibration data due to checksum failure or outdated calibration data, mode(%d)", calibration_mode);
     }
 
     if ((calibration_mode != PHY_RF_CAL_NONE) && ((err != ESP_OK) || (ret == ESP_CAL_DATA_CHECK_FAIL))) {
diff --git a/examples/bluetooth/blufi/main/Kconfig.projbuild b/examples/bluetooth/blufi/main/Kconfig.projbuild
index 3ede60cb2e..b8fe9f1957 100644
--- a/examples/bluetooth/blufi/main/Kconfig.projbuild
+++ b/examples/bluetooth/blufi/main/Kconfig.projbuild
@@ -7,4 +7,30 @@ menu "Example Configuration"
         help
             WiFi connection maximum retry, from 0 to 255.
 
+    choice EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD
+        prompt "WiFi Scan auth mode threshold"
+        default ESP_WIFI_AUTH_WPA2_PSK
+        help
+            The weakest authmode to accept in the scan mode.
+            This value defaults to ESP_WIFI_AUTH_WPA2_PSK in case password is present and ESP_WIFI_AUTH_OPEN is used.
+            Please select ESP_WIFI_AUTH_WEP/ESP_WIFI_AUTH_WPA_PSK in case AP is operating in WEP/WPA mode.
+
+        config ESP_WIFI_AUTH_OPEN
+            bool "OPEN"
+        config ESP_WIFI_AUTH_WEP
+            bool "WEP"
+        config ESP_WIFI_AUTH_WPA_PSK
+            bool "WPA PSK"
+        config ESP_WIFI_AUTH_WPA2_PSK
+            bool "WPA2 PSK"
+        config ESP_WIFI_AUTH_WPA_WPA2_PSK
+            bool "WPA/WPA2 PSK"
+        config ESP_WIFI_AUTH_WPA3_PSK
+            bool "WPA3 PSK"
+        config ESP_WIFI_AUTH_WPA2_WPA3_PSK
+            bool "WPA2/WPA3 PSK"
+        config ESP_WIFI_AUTH_WAPI_PSK
+            bool "WAPI PSK"
+    endchoice
+
 endmenu
diff --git a/examples/bluetooth/blufi/main/blufi_example_main.c b/examples/bluetooth/blufi/main/blufi_example_main.c
index c14c03a64e..982158558b 100644
--- a/examples/bluetooth/blufi/main/blufi_example_main.c
+++ b/examples/bluetooth/blufi/main/blufi_example_main.c
@@ -37,6 +37,24 @@
 #define EXAMPLE_INVALID_REASON                255
 #define EXAMPLE_INVALID_RSSI                  -128
 
+#if CONFIG_ESP_WIFI_AUTH_OPEN
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_OPEN
+#elif CONFIG_ESP_WIFI_AUTH_WEP
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WEP
+#elif CONFIG_ESP_WIFI_AUTH_WPA_PSK
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA_PSK
+#elif CONFIG_ESP_WIFI_AUTH_WPA2_PSK
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA2_PSK
+#elif CONFIG_ESP_WIFI_AUTH_WPA_WPA2_PSK
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA_WPA2_PSK
+#elif CONFIG_ESP_WIFI_AUTH_WPA3_PSK
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA3_PSK
+#elif CONFIG_ESP_WIFI_AUTH_WPA2_WPA3_PSK
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WPA2_WPA3_PSK
+#elif CONFIG_ESP_WIFI_AUTH_WAPI_PSK
+#define EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD WIFI_AUTH_WAPI_PSK
+#endif
+
 static void example_event_callback(esp_blufi_cb_event_t event, esp_blufi_cb_param_t *param);
 
 #define WIFI_LIST_NUM   10
@@ -372,6 +390,7 @@ static void example_event_callback(esp_blufi_cb_event_t event, esp_blufi_cb_para
 	case ESP_BLUFI_EVENT_RECV_STA_PASSWD:
         strncpy((char *)sta_config.sta.password, (char *)param->sta_passwd.passwd, param->sta_passwd.passwd_len);
         sta_config.sta.password[param->sta_passwd.passwd_len] = '\0';
+        sta_config.sta.threshold.authmode = EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD;
         esp_wifi_set_config(WIFI_IF_STA, &sta_config);
         BLUFI_INFO("Recv STA PASSWORD %s\n", sta_config.sta.password);
         break;