90 Commits

Author SHA1 Message Date
David Čermák
b1c4c9ae2f Merge branch 'fix/lwip_ping_ipv6only_v5.4' into 'release/v5.4'
fix(lwip): Fix IP6 raw socket checksum in IPv6-only configuration (v5.4)

See merge request espressif/esp-idf!35083
2024-11-22 21:38:49 +08:00
David Cermak
e390c17f99 fix(common_connect): Fix example's stdin/out to setup UART interrupt once
Function example_configure_stdin_stdout() was used for simple UART I/O
operation in CI to enter test env configuration (wifi ssid, IPs, etc).
It could be called multiple times, but didn't handle the situation where
we install UART interrupt from multiple source (e.g. in ICMP tests,
where we first need to enter wifi credentials of test AP and then we
start ping-cmd console to handle ping commands)
2024-11-21 11:24:46 +01:00
yinqingzhao
a34f1eb6f9 feat(wifi): avoid compiling components related to wifi when wifi is not supported 2024-11-21 14:18:41 +08:00
Ondrej Kosta
0738314308 feat(esp_eth): added new generic PHY driver 2024-10-11 10:14:53 +02:00
jgujarathi
e411e43b4b fix(examples) : Common component's wifi disconnect handler should ignore roaming disconnect
- Common component's wifi disconnect handler should ignore roaming disconnect (WIFI_REASON_ROAMING)
  as connect gets issued internally in these cases.
2024-09-11 11:39:43 +08:00
Ondrej Kosta
9e10cca102 fix(esp_eth): fixed default GPIO to match new ver. of P4 devboard 2024-08-08 18:11:38 +02:00
Xu Si Yu
33e7f004e3 fix(common_components): unregister event handler if wifi disconnect and stop reconnecting 2024-07-22 15:56:55 +08:00
David Cermak
39f4f98aa1 fix(examples): Add wifi_remote option to common connect example
* Add MQTT test configuration with WiFi on ESP32-P4
* Document esp_wifi_remote workflow in the example's README
2024-05-29 19:42:00 +08:00
zwx
d7715b96b2 feat(eth) configure eth mac using esp_read_mac
* Closes https://github.com/espressif/esp-idf/issues/13808
2024-05-23 16:41:26 +08:00
Ondrej Kosta
d15a9c2c48 feat(esp_eth): a new folder structure of the driver and other improvements
Fixed memory leak in emac_esp_new_dma function.

Polished ESP EMAC cache management.

Added emac_periph definitions based on SoC features and improved(generalized) ESP EMAC GPIO
initialization.

Added ESP EMAC GPIO reservation.

Added check for frame error condition indicated by EMAC DMA and created a target test.
2024-05-14 08:23:31 +02:00
Tomas Rezucha
cb21994358 Merge branch 'fix/common_examples_cmake' into 'master'
fix(examples): Make esp_eth public dependency of protocol_examples_comon

See merge request espressif/esp-idf!28618
2024-01-23 23:55:30 +08:00
Tomas Rezucha
21df64f4a9 fix(examples): Make esp_eth public dependency of protocol_examples_comon 2024-01-22 21:51:37 +08:00
Ondrej Kosta
85c4601ed5 fix(examples): fixed common_connect example to support ESP32P4 internal EMAC 2024-01-22 09:48:15 +01:00
laokaiyao
baccc61482 refactor(parlio): make parlio driver as component 2024-01-04 14:12:42 +08:00
Song Ruo Jing
bc09031496 refactor(uart_vfs): Move uart implementation of vfs to esp_driver_uart
Deprecated esp_vfs_dev_uart_xxx APIs
vfs_uart test case moved to esp_driver_uart test_apps
Astyle fixed for uart_vfs
2023-12-15 17:14:55 +08:00
David Cermak
1780bababd feat(examples): Add PPP to common connection component 2023-10-30 14:50:00 +01:00
David Cermak
88d18e9a40 fix(esp_netif): Mark esp_netif_next deprecated and fix usages
* Uses netif_find_if() in IPv6 examples
* Fixes esp_netif_next() usage in L2TAP
2023-10-13 15:56:45 +02:00
Euripedes Rocha
4778d9b477 protocols/examples: Disable Wifi connection if not supported
- Disable Kconfig option for Wifi if not supported by the SoC
- Enable building mqtt examples when target is set to esp32h2
2023-05-30 13:26:45 +02:00
xieqinan
745780cdc4 comm_components: eth_start initializes spi bus with SPI_DMA_CH_AUTO
Close https://github.com/espressif/esp-idf/issues/11083
2023-04-17 12:02:05 +00:00
David Čermák
956e62c461 Merge branch 'feature/lwip_ipv6_only' into 'master'
lwip: Support IPv6 only mode

Closes IDF-6023

See merge request espressif/esp-idf!20468
2023-03-01 21:38:10 +08:00
Harshit Malpani
34705c0cc4
fix esp_http_client_example to build for Linux target. Made protocol_examples_common compatible for Linux target 2023-02-27 15:12:14 +05:30
David Cermak
5f6cb31105 lwip: Support IPv6 only mode 2023-02-27 08:53:34 +01:00
David Cermak
854e16feb3 examples: Add common linux component tapif_io
That can be used with linux target on lwip to pass packets from lwip to
linux host networking stack, e.g. routing the trafic to internet.
2023-01-31 08:43:50 +01:00
Laukik Hase
167618d6a4
examples/protocols: Added URI encoding/decoding feature
- http_server/simple: Decoding received query
  - esp_http_client: Sending encoded query
2023-01-25 17:47:14 +05:30
Chen Yudong
9c28e3f1cb example_common: fix netif ips may be printed before got ipv4 2022-09-05 16:53:55 +08:00
David Cermak
5c383d7b73 esp_netif/lwip: Fix deps cycles to "lwip -> esp_netif -> phy-drivers"
Fix dependency tree so that lwip doesn't depend on any specific network
interface component.
Network interface drivers shall depend on esp_netif.
esp_netif shall depend on lwip (but not on any specific interface
driver) -- it optionally depends on vfs and esp_eth (need ethernet
header for L2/bridge mode)
2022-07-20 14:59:07 +02:00
Chen Yudong
2f75733ad7 CI: Improve common test methods
also fix ota test cases
2022-07-15 14:21:34 +08:00
Chen Yudong
4d9393fc53 example: use example common componments in esp_local_ctrl 2022-07-15 01:16:35 +08:00
Chen Yudong
bf0e4943be common_components: add wifi connect console commands 2022-07-15 01:16:27 +08:00
Ondrej Kosta
bb6c6aff36 esp_eth: SPI Ethernet modules initialization simplification 2022-07-14 08:46:22 +02:00
Harshit Malpani
3f00a3e120 Add config option to set stack size for emac_rx task 2022-06-16 09:03:49 +00:00
David Cermak
5e19b9c951 esp-netif: Make dependency on esp-eth optional
* esp-netif to optionally depend on esp-eth (only for l2tap config)
* esp_eth.h now includes the original ethernet header and the
ethernet-netif glue layer
* Updated examples and test to explicitely use esp-eth dependency if
needed
2022-06-09 07:55:40 +00:00
Ondrej Kosta
1a20b10fd3 Examples: common source for GPIO range in Kconfigs defined 2022-05-12 09:33:40 +02:00
Ondrej Kosta
fcdb0306d0 examples: added ESP-NETIF L2 TAP example 2022-04-12 12:33:57 +00:00
Omar Chebib
2571aaf3c9 G0: target component (components/esp32*) doesn't depend on driver anymore 2022-03-02 04:21:00 +00:00
David Cermak
8da2e4088c esp_eth: Update esp32's EMAC API to decouple driver and vendor config 2022-02-14 16:17:29 +00:00
David Cermak
2553fb5845 esp_eth: Make EMAC DMA burst size configurable
Merges https://github.com/espressif/esp-idf/pull/7874
Closes  https://github.com/espressif/esp-idf/issues/7380
2022-02-14 16:17:29 +00:00
Darian Leung
57fd78f5ba freertos: Remove legacy data types
This commit removes the usage of all legacy FreeRTOS data types that
are exposed via configENABLE_BACKWARD_COMPATIBILITY. Legacy types can
still be used by enabling CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY.
2022-02-09 23:05:45 +08:00
Fischerauer Christian
3fb83f2866 esp_eth: rework KSZ80xx implementation and add more KSZ80xx PHYs
* add support for KSZ8001, KSZ8021, KSZ8031, KSZ8051 and KSZ8061
* remove duplicate code
* simplify architecture to make the code base extensible (for future work)
2021-12-02 11:56:08 +01:00
Roland Dobai
766aa57084 Build & config: Remove leftover files from the unsupported "make" build system 2021-11-11 15:32:36 +01:00
Ondrej Kosta
35454b2bf7 Eth_examples: added support of ESP32-S3 chip
Defined SPI modules default GPIO values for ESP32-S3

SPI bus needs to be initialized with SPI_DMA_CH_AUTO option
2021-09-08 13:11:39 +02:00
Ondrej Kosta
300618e5be Merge branch 'feature/dual_eth' into 'master'
esp_eth: add support for multiple Ethernets modules at a time

Closes IDFGH-5596

See merge request espressif/esp-idf!14640
2021-08-27 06:11:48 +00:00
Ondrej Kosta
ef30384902 esp_eth: add support for multiple Ethernets modules at a time
Ethernet driver events properly bounded with ESP NETIF actions to support multiple Ethernet modules used at a time.

Components using Ethernet updated to conform with new API.

Closes https://github.com/espressif/esp-idf/issues/7318
2021-08-24 17:10:36 +02:00
Ivan Grokhotkov
ece73a3e55 examples/protocols: fix compilation when CONFIG_EXAMPLE_USE_OPENETH=y
The code checked CONFIG_ETH_USE_SPI_ETHERNET (which is usually set),
but CONFIG_EXAMPLE_ETH_SPI_xxx_GPIO options are only defined if
CONFIG_EXAMPLE_USE_SPI_ETHERNET is set. Fix the ifdef accordingly.
Regression from aea901f0.
2021-08-15 21:58:42 +05:00
Ondrej Kosta
4e77430107 examples: Update Ethernet examples to use new PHY LAN87xx init function
Ethernet examples device usage and Kconfig options synchronized
2021-07-28 19:34:05 +08:00
He Yin Ling
97a09e51ce example: set example wifi scan method to all channel:
in CI example test we could have runners with same SSID in the same lab.
Use scan on all channel will let DUT connect to the AP with best RSSI.
2021-06-09 10:01:17 +08:00
ronghulin
3373eff989 Bugfix: Connect example to add scan mode config
Closes https://github.com/espressif/esp-idf/issues/6595
2021-03-24 15:44:48 +08:00
yuanjm
821eea45b3 examples: Strip IPv6 function in example and use sockaddr_storage to replace sockaddr_in6 2021-02-23 18:26:03 +08:00
xiehang
b8a8fe3f54 esp_wifi: Modify ESP_IF_WIFI_STA to WIFI_IF_STA 2021-01-19 11:55:44 +08:00
xiehang
c260c223e9 example: We should not check the return value of esp_wifi_connect() in any case 2021-01-11 14:40:18 +08:00