- Fixed periodic adv enable params checking
- Fixed BLE assert lld_scan.c 1728 when receiving directed adv
- Support resolving RPA to identity address when creating connection
- Fixed BLE assert rwble.c 505 param 00400010
- Fixed peer address type error in HCI LE meta event
- Fixed setting random address failed when extended adv is enabled
(cherry picked from commit 326f391f9c5a218bad521f3a1277fd09f240ac6d)
Co-authored-by: chenjianhua <chenjianhua@espressif.com>
- Fixed BLE vendor HCI set and get tx power
- Support BLE vendor HCI set adv aux offset command
- Support BLE vendor HCI set CSA support command
- Added config for BLE instant passed workaround
- Fixed btdm_sleep_clock_sync timeout workaround
(cherry picked from commit 1e3220b0b084ce0363e8268d6d1cf9d20fa07a59)
Co-authored-by: chenjianhua <chenjianhua@espressif.com>
- Fixed extended uncoded and coded scan scheduling
- Add config for channel assessment and ping procedure
- Clear random address for extended advertising
- Add periodic advertising list check
- Fixed periodic advertising data setting with zero length
The issue is `esp_flash_write_encryped` function in ROM on ESP32C3, ESP32S3
calls legacy implementation, which uses old configuration. And this causes
write fails.
The solution in this commit is to compile and link this function(and related)
in IRAM instead of the ROM one.
The IRAM cost increases around 1.2KB after the fix
1.Optimize bin size for STA only mode
2.Change fragment threshold to 256
3.Support fragment for LR mode
4.Fix ampdu duration issue
5.Fix rx fragment fail in Open mode.
1.bringup c3 v1.1 and sync func to c3 eco7 rom
2.support to set null&probe lifetime
3.support to adjust listen interval to dtim period
4.support tx pkt w/o wake null
5.allow to tx null0 if requtest to rx data
- Fixed extended adv address setting after adv restart
- Fixed scan channel index setting for extended scan
- Add API to set aux channel index for extended adv
Some APs are configured to hide the SSID, the length field of the SSID element
in the Beacon frame is set to 0. This can cause incorrect parsing of the Beacon
by the Wi-Fi MAC hardware.
Some APs send two beacon frames with different BSSID in a TBTT cycle. After
correctly parsing the beacon of the associated AP, it continue to receive the
other beacon frame, which will cause the MAC to remain in a wait RX/TXING
state, blocking the Wi-Fi go to sleep.
system: support USB_OTG CDC console on ESP32-S3
Closes IDF-2048, IDF-2987, IDFGH-7134, IDFGH-7291, and IDFGH-7835
See merge request espressif/esp-idf!19312
