/*
 * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */
#pragma once

#include <stdint.h>
#include "esp_err.h"
#include "driver/i2c_types.h"
#include "hal/gpio_types.h"
#include "soc/soc_caps.h"

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @brief I2C slave specific configurations
 */
typedef struct {
    i2c_port_num_t i2c_port;                 /*!< I2C port number, `-1` for auto selecting */
    gpio_num_t sda_io_num;                   /*!< SDA IO number used by I2C bus */
    gpio_num_t scl_io_num;                   /*!< SCL IO number used by I2C bus */
    i2c_clock_source_t clk_source;           /*!< Clock source of I2C bus. */
    uint32_t send_buf_depth;                 /*!< Depth of internal transfer ringbuffer, increase this value can support more transfers pending in the background */
    uint16_t slave_addr;                     /*!< I2C slave address */
    i2c_addr_bit_len_t addr_bit_len;         /*!< I2C slave address in bit length */
    int intr_priority;                       /*!< I2C interrupt priority, if set to 0, driver will select the default priority (1,2,3). */
    struct {
#if SOC_I2C_SLAVE_CAN_GET_STRETCH_CAUSE
        uint32_t stretch_en: 1;              /*!< Enable slave stretch */
#endif
#if SOC_I2C_SLAVE_SUPPORT_BROADCAST
        uint32_t broadcast_en: 1;            /*!< I2C slave enable broadcast */
#endif
#if SOC_I2C_SLAVE_SUPPORT_I2CRAM_ACCESS
        uint32_t access_ram_en: 1;           /*!< Can get access to I2C RAM directly */
#endif
#if SOC_I2C_SLAVE_SUPPORT_SLAVE_UNMATCH
        uint32_t slave_unmatch_en: 1;        /*!< Can trigger unmatch interrupt when slave address does not match what master sends*/
#endif
    } flags;                                 /*!< I2C slave config flags */
} i2c_slave_config_t;

/**
 * @brief Group of I2C slave callbacks (e.g. get i2c slave stretch cause). But take care of potential concurrency issues.
 * @note The callbacks are all running under ISR context
 * @note When CONFIG_I2C_ISR_IRAM_SAFE is enabled, the callback itself and functions called by it should be placed in IRAM.
 *       The variables used in the function should be in the SRAM as well.
 */
typedef struct {
#if SOC_I2C_SLAVE_CAN_GET_STRETCH_CAUSE
    i2c_slave_stretch_callback_t on_stretch_occur;  /*!< I2C slave stretched callback */
#endif
    i2c_slave_received_callback_t on_recv_done;   /*!< I2C slave receive done callback */
} i2c_slave_event_callbacks_t;

/**
 * @brief Initialize an I2C slave device
 *
 * @param[in] slave_config I2C slave device configurations
 * @param[out] ret_handle Return a generic I2C device handle
 * @return
 *      - ESP_OK: I2C slave device initialized successfully
 *      - ESP_ERR_INVALID_ARG: I2C device initialization failed because of invalid argument.
 *      - ESP_ERR_NO_MEM: Create I2C device failed because of out of memory.
 */
esp_err_t i2c_new_slave_device(const i2c_slave_config_t *slave_config, i2c_slave_dev_handle_t *ret_handle);

/**
 * @brief Deinitialize the I2C slave device
 *
 * @param[in] i2c_slave I2C slave device handle that created by `i2c_new_slave_device`.
 * @return
 *      - ESP_OK: Delete I2C device successfully.
 *      - ESP_ERR_INVALID_ARG: I2C device initialization failed because of invalid argument.
 */
esp_err_t i2c_del_slave_device(i2c_slave_dev_handle_t i2c_slave);

/**
 * @brief Read bytes from I2C internal buffer. Start a job to receive I2C data.
 *
 * @note This function is non-blocking, it initiates a new receive job and then returns.
 *       User should check the received data from the `on_recv_done` callback that registered by `i2c_slave_register_event_callbacks()`.
 *
 * @param[in] i2c_slave I2C slave device handle that created by `i2c_new_slave_device`.
 * @param[out] data Buffer to store data from I2C fifo. Should be valid until `on_recv_done` is triggered.
 * @param[in] buffer_size Buffer size of data that provided by users.
 * @return
 *      - ESP_OK: I2C slave receive success.
 *      - ESP_ERR_INVALID_ARG: I2C slave receive parameter invalid.
 *      - ESP_ERR_NOT_SUPPORTED: This function should be work in fifo mode, but I2C_SLAVE_NONFIFO mode is configured
 */
esp_err_t i2c_slave_receive(i2c_slave_dev_handle_t i2c_slave, uint8_t *data, size_t buffer_size);

/**
 * @brief Write bytes to internal ringbuffer of the I2C slave data. When the TX fifo empty, the ISR will
 *        fill the hardware FIFO with the internal ringbuffer's data.
 *
 * @note If you connect this slave device to some master device, the data transaction direction is from slave
 *       device to master device.
 *
 * @param[in] i2c_slave I2C slave device handle that created by `i2c_new_slave_device`.
 * @param[in] data Buffer to write to slave fifo, can pickup by master. Can be freed after this function returns. Equal or larger than `size`.
 * @param[in] size In bytes, of `data` buffer.
 * @param[in] xfer_timeout_ms Wait timeout, in ms. Note: -1 means wait forever.
 * @return
 *      - ESP_OK: I2C slave transmit success.
 *      - ESP_ERR_INVALID_ARG: I2C slave transmit parameter invalid.
 *      - ESP_ERR_TIMEOUT: Operation timeout(larger than xfer_timeout_ms) because the device is busy or hardware crash.
 *      - ESP_ERR_NOT_SUPPORTED: This function should be work in fifo mode, but I2C_SLAVE_NONFIFO mode is configured
 */
esp_err_t i2c_slave_transmit(i2c_slave_dev_handle_t i2c_slave, const uint8_t *data, int size, int xfer_timeout_ms);

/**
 * @brief Set I2C slave event callbacks for I2C slave channel.
 *
 * @note User can deregister a previously registered callback by calling this function and setting the callback member in the `cbs` structure to NULL.
 * @note When CONFIG_I2C_ISR_IRAM_SAFE is enabled, the callback itself and functions called by it should be placed in IRAM.
 *       The variables used in the function should be in the SRAM as well. The `user_data` should also reside in SRAM.
 *
 * @param[in] i2c_slave I2C slave device handle that created by `i2c_new_slave_device`.
 * @param[in] cbs Group of callback functions
 * @param[in] user_data User data, which will be passed to callback functions directly
 * @return
 *      - ESP_OK: Set I2C transaction callbacks successfully
 *      - ESP_ERR_INVALID_ARG: Set I2C transaction callbacks failed because of invalid argument
 *      - ESP_FAIL: Set I2C transaction callbacks failed because of other error
 */
esp_err_t i2c_slave_register_event_callbacks(i2c_slave_dev_handle_t i2c_slave, const i2c_slave_event_callbacks_t *cbs, void *user_data);

#if SOC_I2C_SLAVE_SUPPORT_I2CRAM_ACCESS
/**
 * @brief Read bytes from I2C internal ram. This can be only used when `access_ram_en` in configuration structure set to true.
 *
 * @param[in] i2c_slave I2C slave device handle that created by `i2c_new_slave_device`.
 * @param[in] ram_address The offset of RAM (Cannot larger than I2C RAM memory)
 * @param[out] data Buffer to store data read from I2C ram.
 * @param[in] receive_size Received size from RAM.
 * @return
 *      - ESP_OK: I2C slave transmit success.
 *      - ESP_ERR_INVALID_ARG: I2C slave transmit parameter invalid.
 *      - ESP_ERR_NOT_SUPPORTED: This function should be work in non-fifo mode, but I2C_SLAVE_FIFO mode is configured
 */
esp_err_t i2c_slave_read_ram(i2c_slave_dev_handle_t i2c_slave, uint8_t ram_address, uint8_t *data, size_t receive_size);

/**
 * @brief Write bytes to I2C internal ram. This can be only used when `access_ram_en` in configuration structure set to true.
 *
 * @param[in] i2c_slave I2C slave device handle that created by `i2c_new_slave_device`.
 * @param[in] ram_address The offset of RAM (Cannot larger than I2C RAM memory)
 * @param[in] data Buffer to fill.
 * @param[in] size Received size from RAM.
 * @return
 *      - ESP_OK: I2C slave transmit success.
 *      - ESP_ERR_INVALID_ARG: I2C slave transmit parameter invalid.
 *      - ESP_ERR_INVALID_SIZE: Write size is larger than
 *      - ESP_ERR_NOT_SUPPORTED: This function should be work in non-fifo mode, but I2C_SLAVE_FIFO mode is configured
 */
esp_err_t i2c_slave_write_ram(i2c_slave_dev_handle_t i2c_slave, uint8_t ram_address, const uint8_t *data, size_t size);

#endif
#ifdef __cplusplus
}
#endif