mirror of https://github.com/espressif/esp-idf synced 2025-03-09 09:09:10 -04:00

History

Frantisek Hrbata 1c92945f59 change(examples): switch examples to use a minimal build

Currently, several example dependencies rely on the fact that all
registered components are added to the build, along with components
specified in common requirements. This results in longer build times
because even unused components must be built. Switch all examples to use
idf_minimal_build to compile only the components actually required by
the example.

Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>

2024-11-20 20:14:40 +01:00

main

change(examples): explicitly specify component dependencies for examples

2024-11-20 14:11:24 +01:00

CMakeLists.txt

change(examples): switch examples to use a minimal build

2024-11-20 20:14:40 +01:00

README.md

feat(wifi): add wifi support for esp32c61

2024-08-30 20:43:06 +08:00

sdkconfig.defaults

esp_wifi: itwt support light sleep

2023-04-06 10:46:32 +08:00

sdkconfig.defaults.esp32c6

ci: enable hardware crypto module for powersave tests

2024-02-02 11:21:44 +08:00

README.md

Supported Targets	ESP32-C5	ESP32-C6	ESP32-C61

Wifi itwt Example

Introduction

This example shows how to use itwt of wifi.

Itwt only works in station mode. And AP needs to support the capability of itwt.

Itwt can works under different power save mode.

Modem sleep (supported)

This is default mode. Under this mode, can support console command "itwt, probe" to config itwt.

         itwt: this command is for itwt setup/teardown/suspend.

         probe: this command will send a probe request to update tsf time with ap

README.md

Wifi itwt Example

Introduction

Modem sleep (supported)

Light Sleep (will support)

Typical current consumption with Itwt enabled

Typical current consumption with Itwt disabled