esp-idf/components/soc/esp32c6/include/soc/clk_tree_defs.h

/*
 * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */
#pragma once

#ifdef __cplusplus
extern "C" {
#endif

/*
 ************************* ESP32C6 Root Clock Source ****************************
 * 1) Internal 17.5MHz RC Oscillator: RC_FAST (may also referred as FOSC in TRM and reg. description)
 *
 *    This RC oscillator generates a ~17.5MHz clock signal output as the RC_FAST_CLK.
 *
 *    The exact frequency of RC_FAST_CLK can be computed in runtime through calibration.
 *
 * 2) External 40MHz Crystal Clock: XTAL
 *
 * 3) Internal 136kHz RC Oscillator: RC_SLOW (may also referrred as SOSC in TRM or reg. description)
 *
 *    This RC oscillator generates a ~136kHz clock signal output as the RC_SLOW_CLK. The exact frequency of this clock
 *    can be computed in runtime through calibration.
 *
 * 4) Internal 32kHz RC Oscillator: RC32K
 *
 *    The exact frequency of this clock can be computed in runtime through calibration.
 *
 * 5) External 32kHz Crystal Clock (optional): XTAL32K
 *
 *    The clock source for this XTAL32K_CLK should be a 32kHz crystal connecting to the XTAL_32K_P and XTAL_32K_N
 *    pins.
 *
 *    XTAL32K_CLK can also be calibrated to get its exact frequency.
 *
 * 6) External Slow Clock (optional): OSC_SLOW
 *
 *    A slow clock signal generated by an external circuit can be connected to GPIO0 to be the clock source for the
 *    RTC_SLOW_CLK.
 *
 *    OSC_SLOW_CLK can also be calibrated to get its exact frequency.
 */

/* With the default value of FOSC_DFREQ = 100, RC_FAST clock frequency is 17.5 MHz +/- 7% */
#define SOC_CLK_RC_FAST_FREQ_APPROX         17500000                            /*!< Approximate RC_FAST_CLK frequency in Hz */
#define SOC_CLK_RC_SLOW_FREQ_APPROX         136000                              /*!< Approximate RC_SLOW_CLK frequency in Hz */
#define SOC_CLK_RC32K_FREQ_APPROX           32768                               /*!< Approximate RC32K_CLK frequency in Hz */
#define SOC_CLK_XTAL32K_FREQ_APPROX         32768                               /*!< Approximate XTAL32K_CLK frequency in Hz */
#define SOC_CLK_OSC_SLOW_FREQ_APPROX        32768                               /*!< Approximate OSC_SLOW_CLK (external slow clock) frequency in Hz */

// Naming convention: SOC_ROOT_CLK_{loc}_{type}_[attr]
// {loc}: EXT, INT
// {type}: XTAL, RC
// [attr] - optional: [frequency], FAST, SLOW
/**
 * @brief Root clock
 */
typedef enum {
    SOC_ROOT_CLK_INT_RC_FAST,          /*!< Internal 17.5MHz RC oscillator */
    SOC_ROOT_CLK_INT_RC_SLOW,          /*!< Internal 136kHz RC oscillator */
    SOC_ROOT_CLK_EXT_XTAL,             /*!< External 40MHz crystal */
    SOC_ROOT_CLK_EXT_XTAL32K,          /*!< External 32kHz crystal */
    SOC_ROOT_CLK_INT_RC32K,            /*!< Internal 32kHz RC oscillator */
    SOC_ROOT_CLK_EXT_OSC_SLOW,         /*!< External slow clock signal at pin0 */
} soc_root_clk_t;

/**
 * @brief CPU_CLK mux inputs, which are the supported clock sources for the CPU_CLK
 * @note Enum values are matched with the register field values on purpose
 */
typedef enum {
    SOC_CPU_CLK_SRC_XTAL = 0,              /*!< Select XTAL_CLK as CPU_CLK source */
    SOC_CPU_CLK_SRC_PLL = 1,               /*!< Select PLL_CLK as CPU_CLK source (PLL_CLK is the output of 40MHz crystal oscillator frequency multiplier, 480MHz) */
    SOC_CPU_CLK_SRC_RC_FAST = 2,           /*!< Select RC_FAST_CLK as CPU_CLK source */
    SOC_CPU_CLK_SRC_INVALID,               /*!< Invalid CPU_CLK source */
} soc_cpu_clk_src_t;

/**
 * @brief RTC_SLOW_CLK mux inputs, which are the supported clock sources for the RTC_SLOW_CLK
 * @note Enum values are matched with the register field values on purpose
 */
typedef enum {
    SOC_RTC_SLOW_CLK_SRC_RC_SLOW = 0,                 /*!< Select RC_SLOW_CLK as RTC_SLOW_CLK source */
    SOC_RTC_SLOW_CLK_SRC_XTAL32K = 1,                 /*!< Select XTAL32K_CLK as RTC_SLOW_CLK source */
    SOC_RTC_SLOW_CLK_SRC_RC32K = 2,                   /*!< Select RC32K_CLK as RTC_SLOW_CLK source */
    SOC_RTC_SLOW_CLK_SRC_OSC_SLOW = 3,                /*!< Select OSC_SLOW_CLK (external slow clock) as RTC_SLOW_CLK source */
    SOC_RTC_SLOW_CLK_SRC_INVALID,                     /*!< Invalid RTC_SLOW_CLK source */
} soc_rtc_slow_clk_src_t;

/**
 * @brief RTC_FAST_CLK mux inputs, which are the supported clock sources for the RTC_FAST_CLK
 * @note Enum values are matched with the register field values on purpose
 */
typedef enum {
    SOC_RTC_FAST_CLK_SRC_RC_FAST = 0,      /*!< Select RC_FAST_CLK as RTC_FAST_CLK source */
    SOC_RTC_FAST_CLK_SRC_XTAL_D2 = 1,      /*!< Select XTAL_D2_CLK as RTC_FAST_CLK source */
    SOC_RTC_FAST_CLK_SRC_XTAL_DIV = SOC_RTC_FAST_CLK_SRC_XTAL_D2, /*!< Alias name for `SOC_RTC_FAST_CLK_SRC_XTAL_D2` */
    SOC_RTC_FAST_CLK_SRC_INVALID,          /*!< Invalid RTC_FAST_CLK source */
} soc_rtc_fast_clk_src_t;

// Naming convention: SOC_MOD_CLK_{[upstream]clock_name}_[attr]
// {[upstream]clock_name}: XTAL, (BB)PLL, etc.
// [attr] - optional: FAST, SLOW, D<divider>, F<freq>
/**
 * @brief Supported clock sources for modules (CPU, peripherals, RTC, etc.)
 *
 * @note enum starts from 1, to save 0 for special purpose
 */
typedef enum {
    // For CPU domain
    SOC_MOD_CLK_CPU = 1,                       /*!< CPU_CLK can be sourced from XTAL, PLL, or RC_FAST by configuring soc_cpu_clk_src_t */
    // For RTC domain
    SOC_MOD_CLK_RTC_FAST,                      /*!< RTC_FAST_CLK can be sourced from XTAL_D2 or RC_FAST by configuring soc_rtc_fast_clk_src_t */
    SOC_MOD_CLK_RTC_SLOW,                      /*!< RTC_SLOW_CLK can be sourced from RC_SLOW, XTAL32K, RC32K, or OSC_SLOW by configuring soc_rtc_slow_clk_src_t */
    // For digital domain: peripherals, WIFI, BLE
    SOC_MOD_CLK_PLL_F80M,                      /*!< PLL_F80M_CLK is derived from PLL (clock gating + fixed divider of 6), it has a fixed frequency of 80MHz */
    SOC_MOD_CLK_PLL_F160M,                     /*!< PLL_F160M_CLK is derived from PLL (clock gating + fixed divider of 3), it has a fixed frequency of 160MHz */
    SOC_MOD_CLK_PLL_F240M,                     /*!< PLL_F240M_CLK is derived from PLL (clock gating + fixed divider of 2), it has a fixed frequency of 240MHz */
    SOC_MOD_CLK_XTAL32K,                       /*!< XTAL32K_CLK comes from the external 32kHz crystal, passing a clock gating to the peripherals */
    SOC_MOD_CLK_RC_FAST,                       /*!< RC_FAST_CLK comes from the internal 20MHz rc oscillator, passing a clock gating to the peripherals */
    SOC_MOD_CLK_XTAL,                          /*!< XTAL_CLK comes from the external 40MHz crystal */
    SOC_MOD_CLK_XTAL_D2,                       /*!< XTAL_D2_CLK comes from the external 40MHz crystal, passing a div of 2 to the LP peripherals */
    SOC_MOD_CLK_INVALID,                       /*!< Indication of the end of the available module clock sources */
} soc_module_clk_t;

//////////////////////////////////////////////////SYSTIMER//////////////////////////////////////////////////////////////

/**
 * @brief Type of SYSTIMER clock source
 */
typedef enum {
    SYSTIMER_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,       /*!< SYSTIMER source clock is XTAL */
    SYSTIMER_CLK_SRC_RC_FAST = SOC_MOD_CLK_RC_FAST, /*!< SYSTIMER source clock is RC_FAST */
    SYSTIMER_CLK_SRC_DEFAULT = SOC_MOD_CLK_XTAL,    /*!< SYSTIMER source clock default choice is XTAL */
} soc_periph_systimer_clk_src_t;

//////////////////////////////////////////////////GPTimer///////////////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of GPTimer
 *
 * The following code can be used to iterate all possible clocks:
 * @code{c}
 * soc_periph_gptimer_clk_src_t gptimer_clks[] = (soc_periph_gptimer_clk_src_t)SOC_GPTIMER_CLKS;
 * for (size_t i = 0; i< sizeof(gptimer_clks) / sizeof(gptimer_clks[0]); i++) {
 *     soc_periph_gptimer_clk_src_t clk = gptimer_clks[i];
 *     // Test GPTimer with the clock `clk`
 * }
 * @endcode
 */
#define SOC_GPTIMER_CLKS {SOC_MOD_CLK_PLL_F80M, SOC_MOD_CLK_RC_FAST, SOC_MOD_CLK_XTAL}

/**
 * @brief Type of GPTimer clock source
 */
typedef enum {
    GPTIMER_CLK_SRC_PLL_F80M = SOC_MOD_CLK_PLL_F80M, /*!< Select PLL_F80M as the source clock */
    GPTIMER_CLK_SRC_RC_FAST = SOC_MOD_CLK_RC_FAST,   /*!< Select RC_FAST as the source clock */
    GPTIMER_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,         /*!< Select XTAL as the source clock */
    GPTIMER_CLK_SRC_DEFAULT = SOC_MOD_CLK_PLL_F80M,  /*!< Select PLL_F80M as the default choice */
} soc_periph_gptimer_clk_src_t;

/**
 * @brief Type of Timer Group clock source, reserved for the legacy timer group driver
 */
typedef enum {
    TIMER_SRC_CLK_PLL_F80M = SOC_MOD_CLK_PLL_F80M,     /*!< Timer group clock source is PLL_F80M */
    TIMER_SRC_CLK_XTAL = SOC_MOD_CLK_XTAL,             /*!< Timer group clock source is XTAL */
    TIMER_SRC_CLK_DEFAULT = SOC_MOD_CLK_PLL_F80M,      /*!< Timer group clock source default choice is PLL_F80M */
} soc_periph_tg_clk_src_legacy_t;

//////////////////////////////////////////////////RMT///////////////////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of RMT
 */
#define SOC_RMT_CLKS {SOC_MOD_CLK_PLL_F80M, SOC_MOD_CLK_RC_FAST, SOC_MOD_CLK_XTAL}

/**
 * @brief Type of RMT clock source
 */
typedef enum {
    RMT_CLK_SRC_PLL_F80M = SOC_MOD_CLK_PLL_F80M, /*!< Select PLL_F80M as the source clock */
    RMT_CLK_SRC_RC_FAST = SOC_MOD_CLK_RC_FAST,   /*!< Select RC_FAST as the source clock */
    RMT_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,         /*!< Select XTAL as the source clock */
    RMT_CLK_SRC_DEFAULT = SOC_MOD_CLK_PLL_F80M,  /*!< Select PLL_F80M as the default choice */
} soc_periph_rmt_clk_src_t;

/**
 * @brief Type of RMT clock source, reserved for the legacy RMT driver
 */
typedef enum {
    RMT_BASECLK_PLL_F80M = SOC_MOD_CLK_PLL_F80M, /*!< RMT source clock is PLL_F80M */
    RMT_BASECLK_XTAL = SOC_MOD_CLK_XTAL,         /*!< RMT source clock is XTAL */
    RMT_BASECLK_DEFAULT = SOC_MOD_CLK_PLL_F80M,  /*!< RMT source clock default choice is PLL_F80M */
} soc_periph_rmt_clk_src_legacy_t;

//////////////////////////////////////////////////Temp Sensor///////////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of Temperature Sensor
 */
#define SOC_TEMP_SENSOR_CLKS {SOC_MOD_CLK_XTAL, SOC_MOD_CLK_RC_FAST}

/**
 * @brief Type of Temp Sensor clock source
 */
typedef enum {
    TEMPERATURE_SENSOR_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,       /*!< Select XTAL as the source clock */
    TEMPERATURE_SENSOR_CLK_SRC_RC_FAST = SOC_MOD_CLK_RC_FAST, /*!< Select RC_FAST as the source clock */
    TEMPERATURE_SENSOR_CLK_SRC_DEFAULT = SOC_MOD_CLK_XTAL,    /*!< Select XTAL as the default choice */
} soc_periph_temperature_sensor_clk_src_t;

///////////////////////////////////////////////////UART/////////////////////////////////////////////////////////////////

/**
 * @brief Type of UART clock source, reserved for the legacy UART driver
 */
typedef enum {
    UART_SCLK_PLL_F80M = SOC_MOD_CLK_PLL_F80M,           /*!< UART source clock is PLL_F80M */
    UART_SCLK_RTC = SOC_MOD_CLK_RC_FAST,                /*!< UART source clock is RC_FAST */
    UART_SCLK_XTAL = SOC_MOD_CLK_XTAL,                  /*!< UART source clock is XTAL */
    UART_SCLK_DEFAULT = SOC_MOD_CLK_PLL_F80M,           /*!< UART source clock default choice is PLL_F80M */
} soc_periph_uart_clk_src_legacy_t;

//////////////////////////////////////////////////MCPWM/////////////////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of MCPWM Timer
 */
#define SOC_MCPWM_TIMER_CLKS {SOC_MOD_CLK_PLL_F160M, SOC_MOD_CLK_XTAL}

/**
 * @brief Type of MCPWM timer clock source
 */
typedef enum {
    MCPWM_TIMER_CLK_SRC_PLL160M = SOC_MOD_CLK_PLL_F160M, /*!< Select PLL_F160M as the source clock */
    MCPWM_TIMER_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,         /*!< Select XTAL as the source clock */
    MCPWM_TIMER_CLK_SRC_DEFAULT = SOC_MOD_CLK_PLL_F160M, /*!< Select PLL_F160M as the default clock choice */
} soc_periph_mcpwm_timer_clk_src_t;

/**
 * @brief Array initializer for all supported clock sources of MCPWM Capture Timer
 */
#define SOC_MCPWM_CAPTURE_CLKS {SOC_MOD_CLK_PLL_F160M, SOC_MOD_CLK_XTAL}

/**
 * @brief Type of MCPWM capture clock source
 */
typedef enum {
    MCPWM_CAPTURE_CLK_SRC_PLL160M = SOC_MOD_CLK_PLL_F160M, /*!< Select PLL_F160M as the source clock */
    MCPWM_CAPTURE_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,         /*!< Select XTAL as the source clock */
    MCPWM_CAPTURE_CLK_SRC_DEFAULT = SOC_MOD_CLK_PLL_F160M, /*!< Select PLL_F160M as the default clock choice */
} soc_periph_mcpwm_capture_clk_src_t;

///////////////////////////////////////////////////// I2S //////////////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of I2S
 */
#define SOC_I2S_CLKS {SOC_MOD_CLK_PLL_F160M, SOC_MOD_CLK_XTAL}

/**
 * @brief I2S clock source enum
 */
typedef enum {
    I2S_CLK_SRC_DEFAULT = SOC_MOD_CLK_PLL_F160M,                /*!< Select PLL_F160M as the default source clock  */
    I2S_CLK_SRC_PLL_160M = SOC_MOD_CLK_PLL_F160M,               /*!< Select PLL_F160M as the source clock */
    I2S_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,                        /*!< Select XTAL as the source clock */
} soc_periph_i2s_clk_src_t;

/////////////////////////////////////////////////I2C////////////////////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of I2C
 */
#define SOC_I2C_CLKS {SOC_MOD_CLK_XTAL, SOC_MOD_CLK_RC_FAST}

/**
 * @brief Type of I2C clock source.
 */
typedef enum {
    I2C_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,                        /*!< Select XTAL as the source clock */
    I2C_CLK_SRC_RC_FAST = SOC_MOD_CLK_RC_FAST,                  /*!< Select RC_FAST as the source clock */
    I2C_CLK_SRC_DEFAULT = SOC_MOD_CLK_XTAL,                     /*!< Select XTAL as the default source clock */
} soc_periph_i2c_clk_src_t;

///////////////////////////////////////////////LP_I2C///////////////////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of LP_I2C
 */
#define SOC_LP_I2C_CLKS {SOC_MOD_CLK_RTC_FAST, SOC_MOD_CLK_XTAL_D2}

/**
 * @brief Type of LP_I2C clock source.
 */
typedef enum {
    LP_I2C_SCLK_LP_FAST = SOC_MOD_CLK_RTC_FAST,                 /*!< LP_I2C source clock is RTC_FAST */
    LP_I2C_SCLK_XTAL_D2 = SOC_MOD_CLK_XTAL_D2,                  /*!< LP_I2C source clock is XTAL_D2 */
    LP_I2C_SCLK_DEFAULT = SOC_MOD_CLK_RTC_FAST,                 /*!< LP_I2C source clock default choice is RTC_FAST */
} soc_periph_lp_i2c_clk_src_t;

/////////////////////////////////////////////////SPI////////////////////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of SPI
 */
#define SOC_SPI_CLKS {SOC_MOD_CLK_PLL_F80M, SOC_MOD_CLK_XTAL, SOC_MOD_CLK_RC_FAST}

/**
 * @brief Type of SPI clock source.
 */
typedef enum {
    SPI_CLK_SRC_DEFAULT = SOC_MOD_CLK_PLL_F80M,     /*!< Select PLL_80M as SPI source clock */
    SPI_CLK_SRC_PLL_F80M = SOC_MOD_CLK_PLL_F80M,    /*!< Select PLL_80M as SPI source clock */
    SPI_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,            /*!< Select XTAL as SPI source clock */
    SPI_CLK_SRC_RC_FAST = SOC_MOD_CLK_RC_FAST,      /*!< Select RC_FAST as SPI source clock */
} soc_periph_spi_clk_src_t;

//////////////////////////////////////////////////SDM//////////////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of SDM
 */
#define SOC_SDM_CLKS {SOC_MOD_CLK_PLL_F80M, SOC_MOD_CLK_XTAL}

/**
 * @brief Sigma Delta Modulator clock source
 */
typedef enum {
    SDM_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,         /*!< Select XTAL clock as the source clock */
    SDM_CLK_SRC_PLL_F80M = SOC_MOD_CLK_PLL_F80M, /*!< Select PLL_F80M clock as the source clock */
    SDM_CLK_SRC_DEFAULT = SOC_MOD_CLK_PLL_F80M,  /*!< Select PLL_F80M clock as the default clock choice */
} soc_periph_sdm_clk_src_t;

//////////////////////////////////////////////////GPIO Glitch Filter////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of Glitch Filter
 */
#define SOC_GLITCH_FILTER_CLKS {SOC_MOD_CLK_PLL_F80M, SOC_MOD_CLK_XTAL}

/**
 * @brief Glitch filter clock source
 */

typedef enum {
    GLITCH_FILTER_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,         /*!< Select XTAL clock as the source clock */
    GLITCH_FILTER_CLK_SRC_PLL_F80M = SOC_MOD_CLK_PLL_F80M, /*!< Select PLL_F80M clock as the source clock */
    GLITCH_FILTER_CLK_SRC_DEFAULT = SOC_MOD_CLK_PLL_F80M,  /*!< Select PLL_F80M clock as the default clock choice */
} soc_periph_glitch_filter_clk_src_t;

//////////////////////////////////////////////////TWAI//////////////////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of TWAI
 */
#define SOC_TWAI_CLKS {SOC_MOD_CLK_XTAL}

/**
 * @brief TWAI clock source
 */
typedef enum {
    TWAI_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,    /*!< Select XTAL as the source clock */
    TWAI_CLK_SRC_DEFAULT = SOC_MOD_CLK_XTAL, /*!< Select XTAL as the default clock choice */
} soc_periph_twai_clk_src_t;

//////////////////////////////////////////////////ADC///////////////////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of ADC digital controller
 */
#define SOC_ADC_DIGI_CLKS {SOC_MOD_CLK_XTAL, SOC_MOD_CLK_PLL_F80M, SOC_MOD_CLK_RC_FAST}

/**
 * @brief ADC digital controller clock source
 */
typedef enum {
    ADC_DIGI_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,           /*!< Select XTAL as the source clock */
    ADC_DIGI_CLK_SRC_PLL_F80M = SOC_MOD_CLK_PLL_F80M,   /*!< Select PLL_F80M as the source clock */
    ADC_DIGI_CLK_SRC_RC_FAST = SOC_MOD_CLK_RC_FAST,     /*!< Select RC_FAST as the source clock */
    ADC_DIGI_CLK_SRC_DEFAULT = SOC_MOD_CLK_PLL_F80M,    /*!< Select PLL_F80M as the default clock choice */
} soc_periph_adc_digi_clk_src_t;

//////////////////////////////////////////////////MWDT/////////////////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of MWDT
 */
#define SOC_MWDT_CLKS {SOC_MOD_CLK_XTAL, SOC_MOD_CLK_PLL_F80M, SOC_MOD_CLK_RC_FAST}

/**
 * @brief MWDT clock source
 */
typedef enum {
    MWDT_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,           /*!< Select XTAL as the source clock */
    MWDT_CLK_SRC_PLL_F80M = SOC_MOD_CLK_PLL_F80M,   /*!< Select PLL fixed 80 MHz as the source clock */
    MWDT_CLK_SRC_RC_FAST = SOC_MOD_CLK_RC_FAST,     /*!< Select RTC fast as the source clock */
    MWDT_CLK_SRC_DEFAULT = SOC_MOD_CLK_PLL_F80M,    /*!< Select PLL fixed 80 MHz as the default clock choice */
} soc_periph_mwdt_clk_src_t;

//////////////////////////////////////////////////LEDC/////////////////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of LEDC
 */
#define SOC_LEDC_CLKS {SOC_MOD_CLK_XTAL, SOC_MOD_CLK_PLL_F80M, SOC_MOD_CLK_RC_FAST}

/**
 * @brief Type of LEDC clock source, reserved for the legacy LEDC driver
 */
typedef enum {
    LEDC_AUTO_CLK = 0,                              /*!< LEDC source clock will be automatically selected based on the giving resolution and duty parameter when init the timer*/
    LEDC_USE_PLL_DIV_CLK = SOC_MOD_CLK_PLL_F80M,    /*!< Select PLL_F80M clock as the source clock */
    LEDC_USE_RC_FAST_CLK = SOC_MOD_CLK_RC_FAST,     /*!< Select RC_FAST as the source clock */
    LEDC_USE_XTAL_CLK = SOC_MOD_CLK_XTAL,           /*!< Select XTAL as the source clock */

    LEDC_USE_RTC8M_CLK __attribute__((deprecated("please use 'LEDC_USE_RC_FAST_CLK' instead"))) = LEDC_USE_RC_FAST_CLK,   /*!< Alias of 'LEDC_USE_RC_FAST_CLK' */
} soc_periph_ledc_clk_src_legacy_t;

//////////////////////////////////////////////////PARLIO////////////////////////////////////////////////////////////////

/**
 * @brief Array initializer for all supported clock sources of PARLIO
 */
#define SOC_PARLIO_CLKS {SOC_MOD_CLK_XTAL, SOC_MOD_CLK_PLL_F240M}

/**
 * @brief PARLIO clock source
 */
typedef enum {
    PARLIO_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,           /*!< Select XTAL as the source clock */
    PARLIO_CLK_SRC_PLL_F240M = SOC_MOD_CLK_PLL_F240M, /*!< Select PLL_F240M as the source clock */
    PARLIO_CLK_SRC_DEFAULT = SOC_MOD_CLK_PLL_F240M,   /*!< Select PLL_F240M as the default clock choice */
} soc_periph_parlio_clk_src_t;

#ifdef __cplusplus
}
#endif