mirror of
https://github.com/espressif/esp-idf
synced 2025-04-22 14:31:34 -04:00
327 lines
10 KiB
C
327 lines
10 KiB
C
// Copyright 2020 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#include <stdint.h>
|
|
#include "sdkconfig.h"
|
|
#include "esp_attr.h"
|
|
#include "esp_log.h"
|
|
#include "esp_image_format.h"
|
|
#include "flash_qio_mode.h"
|
|
#include "esp_rom_gpio.h"
|
|
#include "esp_rom_efuse.h"
|
|
#include "esp_rom_uart.h"
|
|
#include "esp_rom_sys.h"
|
|
#include "soc/efuse_reg.h"
|
|
#include "soc/gpio_sig_map.h"
|
|
#include "soc/io_mux_reg.h"
|
|
#include "soc/assist_debug_reg.h"
|
|
#include "soc/cpu.h"
|
|
#include "soc/rtc.h"
|
|
#include "soc/spi_periph.h"
|
|
#include "soc/extmem_reg.h"
|
|
#include "soc/io_mux_reg.h"
|
|
#include "soc/system_reg.h"
|
|
#include "esp32c3/rom/efuse.h"
|
|
#include "esp32c3/rom/spi_flash.h"
|
|
#include "esp32c3/rom/cache.h"
|
|
#include "esp32c3/rom/ets_sys.h"
|
|
#include "esp32c3/rom/spi_flash.h"
|
|
#include "esp32c3/rom/rtc.h"
|
|
#include "bootloader_common.h"
|
|
#include "bootloader_init.h"
|
|
#include "bootloader_clock.h"
|
|
#include "bootloader_flash_config.h"
|
|
#include "bootloader_mem.h"
|
|
#include "regi2c_ctrl.h"
|
|
#include "bootloader_console.h"
|
|
#include "bootloader_flash_priv.h"
|
|
|
|
static const char *TAG = "boot.esp32c3";
|
|
|
|
void IRAM_ATTR bootloader_configure_spi_pins(int drv)
|
|
{
|
|
const uint32_t spiconfig = esp_rom_efuse_get_flash_gpio_info();
|
|
uint8_t wp_pin = esp_rom_efuse_get_flash_wp_gpio();
|
|
uint8_t clk_gpio_num = SPI_CLK_GPIO_NUM;
|
|
uint8_t q_gpio_num = SPI_Q_GPIO_NUM;
|
|
uint8_t d_gpio_num = SPI_D_GPIO_NUM;
|
|
uint8_t cs0_gpio_num = SPI_CS0_GPIO_NUM;
|
|
uint8_t hd_gpio_num = SPI_HD_GPIO_NUM;
|
|
uint8_t wp_gpio_num = SPI_WP_GPIO_NUM;
|
|
if (spiconfig == 0) {
|
|
|
|
} else {
|
|
clk_gpio_num = spiconfig & 0x3f;
|
|
q_gpio_num = (spiconfig >> 6) & 0x3f;
|
|
d_gpio_num = (spiconfig >> 12) & 0x3f;
|
|
cs0_gpio_num = (spiconfig >> 18) & 0x3f;
|
|
hd_gpio_num = (spiconfig >> 24) & 0x3f;
|
|
wp_gpio_num = wp_pin;
|
|
}
|
|
esp_rom_gpio_pad_set_drv(clk_gpio_num, drv);
|
|
esp_rom_gpio_pad_set_drv(q_gpio_num, drv);
|
|
esp_rom_gpio_pad_set_drv(d_gpio_num, drv);
|
|
esp_rom_gpio_pad_set_drv(cs0_gpio_num, drv);
|
|
if (hd_gpio_num <= MAX_PAD_GPIO_NUM) {
|
|
esp_rom_gpio_pad_set_drv(hd_gpio_num, drv);
|
|
}
|
|
if (wp_gpio_num <= MAX_PAD_GPIO_NUM) {
|
|
esp_rom_gpio_pad_set_drv(wp_gpio_num, drv);
|
|
}
|
|
}
|
|
|
|
static void bootloader_reset_mmu(void)
|
|
{
|
|
Cache_Suspend_ICache();
|
|
Cache_Invalidate_ICache_All();
|
|
Cache_MMU_Init();
|
|
|
|
REG_CLR_BIT(EXTMEM_ICACHE_CTRL1_REG, EXTMEM_ICACHE_SHUT_IBUS);
|
|
REG_CLR_BIT(EXTMEM_ICACHE_CTRL1_REG, EXTMEM_ICACHE_SHUT_DBUS);
|
|
}
|
|
|
|
static void update_flash_config(const esp_image_header_t *bootloader_hdr)
|
|
{
|
|
uint32_t size;
|
|
switch (bootloader_hdr->spi_size) {
|
|
case ESP_IMAGE_FLASH_SIZE_1MB:
|
|
size = 1;
|
|
break;
|
|
case ESP_IMAGE_FLASH_SIZE_2MB:
|
|
size = 2;
|
|
break;
|
|
case ESP_IMAGE_FLASH_SIZE_4MB:
|
|
size = 4;
|
|
break;
|
|
case ESP_IMAGE_FLASH_SIZE_8MB:
|
|
size = 8;
|
|
break;
|
|
case ESP_IMAGE_FLASH_SIZE_16MB:
|
|
size = 16;
|
|
break;
|
|
default:
|
|
size = 2;
|
|
}
|
|
uint32_t autoload = Cache_Suspend_ICache();
|
|
// Set flash chip size
|
|
esp_rom_spiflash_config_param(rom_spiflash_legacy_data->chip.device_id, size * 0x100000, 0x10000, 0x1000, 0x100, 0xffff); // TODO: set mode
|
|
Cache_Resume_ICache(autoload);
|
|
}
|
|
|
|
static void print_flash_info(const esp_image_header_t *bootloader_hdr)
|
|
{
|
|
ESP_LOGD(TAG, "magic %02x", bootloader_hdr->magic);
|
|
ESP_LOGD(TAG, "segments %02x", bootloader_hdr->segment_count);
|
|
ESP_LOGD(TAG, "spi_mode %02x", bootloader_hdr->spi_mode);
|
|
ESP_LOGD(TAG, "spi_speed %02x", bootloader_hdr->spi_speed);
|
|
ESP_LOGD(TAG, "spi_size %02x", bootloader_hdr->spi_size);
|
|
|
|
const char *str;
|
|
switch (bootloader_hdr->spi_speed) {
|
|
case ESP_IMAGE_SPI_SPEED_40M:
|
|
str = "40MHz";
|
|
break;
|
|
case ESP_IMAGE_SPI_SPEED_26M:
|
|
str = "26.7MHz";
|
|
break;
|
|
case ESP_IMAGE_SPI_SPEED_20M:
|
|
str = "20MHz";
|
|
break;
|
|
case ESP_IMAGE_SPI_SPEED_80M:
|
|
str = "80MHz";
|
|
break;
|
|
default:
|
|
str = "20MHz";
|
|
break;
|
|
}
|
|
ESP_LOGI(TAG, "SPI Speed : %s", str);
|
|
|
|
/* SPI mode could have been set to QIO during boot already,
|
|
so test the SPI registers not the flash header */
|
|
uint32_t spi_ctrl = REG_READ(SPI_MEM_CTRL_REG(0));
|
|
if (spi_ctrl & SPI_MEM_FREAD_QIO) {
|
|
str = "QIO";
|
|
} else if (spi_ctrl & SPI_MEM_FREAD_QUAD) {
|
|
str = "QOUT";
|
|
} else if (spi_ctrl & SPI_MEM_FREAD_DIO) {
|
|
str = "DIO";
|
|
} else if (spi_ctrl & SPI_MEM_FREAD_DUAL) {
|
|
str = "DOUT";
|
|
} else if (spi_ctrl & SPI_MEM_FASTRD_MODE) {
|
|
str = "FAST READ";
|
|
} else {
|
|
str = "SLOW READ";
|
|
}
|
|
ESP_LOGI(TAG, "SPI Mode : %s", str);
|
|
|
|
switch (bootloader_hdr->spi_size) {
|
|
case ESP_IMAGE_FLASH_SIZE_1MB:
|
|
str = "1MB";
|
|
break;
|
|
case ESP_IMAGE_FLASH_SIZE_2MB:
|
|
str = "2MB";
|
|
break;
|
|
case ESP_IMAGE_FLASH_SIZE_4MB:
|
|
str = "4MB";
|
|
break;
|
|
case ESP_IMAGE_FLASH_SIZE_8MB:
|
|
str = "8MB";
|
|
break;
|
|
case ESP_IMAGE_FLASH_SIZE_16MB:
|
|
str = "16MB";
|
|
break;
|
|
default:
|
|
str = "2MB";
|
|
break;
|
|
}
|
|
ESP_LOGI(TAG, "SPI Flash Size : %s", str);
|
|
}
|
|
|
|
static void IRAM_ATTR bootloader_init_flash_configure(void)
|
|
{
|
|
bootloader_flash_dummy_config(&bootloader_image_hdr);
|
|
bootloader_flash_cs_timing_config();
|
|
}
|
|
|
|
static void bootloader_spi_flash_resume(void)
|
|
{
|
|
bootloader_execute_flash_command(CMD_RESUME, 0, 0, 0);
|
|
esp_rom_spiflash_wait_idle(&g_rom_flashchip);
|
|
}
|
|
|
|
static esp_err_t bootloader_init_spi_flash(void)
|
|
{
|
|
bootloader_init_flash_configure();
|
|
#ifndef CONFIG_SPI_FLASH_ROM_DRIVER_PATCH
|
|
const uint32_t spiconfig = esp_rom_efuse_get_flash_gpio_info();
|
|
if (spiconfig != ESP_ROM_EFUSE_FLASH_DEFAULT_SPI && spiconfig != ESP_ROM_EFUSE_FLASH_DEFAULT_HSPI) {
|
|
ESP_LOGE(TAG, "SPI flash pins are overridden. Enable CONFIG_SPI_FLASH_ROM_DRIVER_PATCH in menuconfig");
|
|
return ESP_FAIL;
|
|
}
|
|
#endif
|
|
|
|
bootloader_spi_flash_resume();
|
|
esp_rom_spiflash_unlock();
|
|
|
|
#if CONFIG_ESPTOOLPY_FLASHMODE_QIO || CONFIG_ESPTOOLPY_FLASHMODE_QOUT
|
|
bootloader_enable_qio_mode();
|
|
#endif
|
|
|
|
print_flash_info(&bootloader_image_hdr);
|
|
update_flash_config(&bootloader_image_hdr);
|
|
//ensure the flash is write-protected
|
|
bootloader_enable_wp();
|
|
return ESP_OK;
|
|
}
|
|
|
|
static void wdt_reset_cpu0_info_enable(void)
|
|
{
|
|
REG_SET_BIT(SYSTEM_CPU_PERI_CLK_EN_REG, SYSTEM_CLK_EN_ASSIST_DEBUG);
|
|
REG_CLR_BIT(SYSTEM_CPU_PERI_RST_EN_REG, SYSTEM_RST_EN_ASSIST_DEBUG);
|
|
REG_WRITE(ASSIST_DEBUG_CORE_0_RCD_EN_REG, ASSIST_DEBUG_CORE_0_RCD_PDEBUGEN | ASSIST_DEBUG_CORE_0_RCD_RECORDEN);
|
|
}
|
|
|
|
static void wdt_reset_info_dump(int cpu)
|
|
{
|
|
(void) cpu;
|
|
// saved PC was already printed by the ROM bootloader.
|
|
// nothing to do here.
|
|
}
|
|
|
|
static void bootloader_check_wdt_reset(void)
|
|
{
|
|
int wdt_rst = 0;
|
|
RESET_REASON rst_reas[2];
|
|
|
|
rst_reas[0] = rtc_get_reset_reason(0);
|
|
if (rst_reas[0] == RTCWDT_SYS_RESET || rst_reas[0] == TG0WDT_SYS_RESET || rst_reas[0] == TG1WDT_SYS_RESET ||
|
|
rst_reas[0] == TG0WDT_CPU_RESET || rst_reas[0] == TG1WDT_CPU_RESET || rst_reas[0] == RTCWDT_CPU_RESET) {
|
|
ESP_LOGW(TAG, "PRO CPU has been reset by WDT.");
|
|
wdt_rst = 1;
|
|
}
|
|
if (wdt_rst) {
|
|
// if reset by WDT dump info from trace port
|
|
wdt_reset_info_dump(0);
|
|
}
|
|
wdt_reset_cpu0_info_enable();
|
|
}
|
|
|
|
static void bootloader_super_wdt_auto_feed(void)
|
|
{
|
|
REG_WRITE(RTC_CNTL_SWD_WPROTECT_REG, RTC_CNTL_SWD_WKEY_VALUE);
|
|
REG_SET_BIT(RTC_CNTL_SWD_CONF_REG, RTC_CNTL_SWD_AUTO_FEED_EN);
|
|
REG_WRITE(RTC_CNTL_SWD_WPROTECT_REG, 0);
|
|
}
|
|
|
|
static inline void bootloader_hardware_init(void)
|
|
{
|
|
// TODO ESP32-C3 IDF-2452
|
|
REGI2C_WRITE_MASK(I2C_ULP, I2C_ULP_IR_FORCE_XPD_IPH, 1);
|
|
REGI2C_WRITE_MASK(I2C_BIAS, I2C_BIAS_DREG_1P1_PVT, 12);
|
|
}
|
|
|
|
/* There happend clock glitch reset for some chip when testing wifi[BIT0] and brownout reset when chip startup[BIT1].
|
|
* But super_watch_dog_reset function is ok, so open it[BIT2].
|
|
* Whether this api will deleted or not depends on analog design & test result when ECO chip come back.
|
|
*/
|
|
static inline void bootloader_glitch_reset_disable(void)
|
|
{
|
|
// TODO ESP32-C3 IDF-2453
|
|
REG_SET_FIELD(RTC_CNTL_FIB_SEL_REG, RTC_CNTL_FIB_SEL, BIT2);
|
|
}
|
|
|
|
esp_err_t bootloader_init(void)
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
bootloader_hardware_init();
|
|
bootloader_glitch_reset_disable();
|
|
bootloader_super_wdt_auto_feed();
|
|
// protect memory region
|
|
bootloader_init_mem();
|
|
/* check that static RAM is after the stack */
|
|
assert(&_bss_start <= &_bss_end);
|
|
assert(&_data_start <= &_data_end);
|
|
// clear bss section
|
|
bootloader_clear_bss_section();
|
|
// reset MMU
|
|
bootloader_reset_mmu();
|
|
// config clock
|
|
bootloader_clock_configure();
|
|
// initialize console, from now on, we can use esp_log
|
|
bootloader_console_init();
|
|
/* print 2nd bootloader banner */
|
|
bootloader_print_banner();
|
|
// update flash ID
|
|
bootloader_flash_update_id();
|
|
// read bootloader header
|
|
if ((ret = bootloader_read_bootloader_header()) != ESP_OK) {
|
|
goto err;
|
|
}
|
|
// read chip revision and check if it's compatible to bootloader
|
|
if ((ret = bootloader_check_bootloader_validity()) != ESP_OK) {
|
|
goto err;
|
|
}
|
|
// initialize spi flash
|
|
if ((ret = bootloader_init_spi_flash()) != ESP_OK) {
|
|
goto err;
|
|
}
|
|
// check whether a WDT reset happend
|
|
bootloader_check_wdt_reset();
|
|
// config WDT
|
|
bootloader_config_wdt();
|
|
// enable RNG early entropy source
|
|
bootloader_enable_random();
|
|
err:
|
|
return ret;
|
|
}
|