mirror of
https://github.com/inspircd/inspircd.git
synced 2025-03-10 02:59:01 -04:00
Fix some words and capitalizations etc...
git-svn-id: http://svn.inspircd.org/repository/trunk/inspircd@8051 e03df62e-2008-0410-955e-edbf42e46eb7
This commit is contained in:
bricker
parent
48fbbf6d7b
commit
78f8883ea0
@ -20,7 +20,7 @@
|
||||
# This is an example of the config file for InspIRCd. #
|
||||
# Change the options to suit your network #
|
||||
# #
|
||||
# $Id$
|
||||
# $Id$ #
|
||||
# #
|
||||
# ____ _ _____ _ _ ____ _ _ _ #
|
||||
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
|
||||
@ -56,17 +56,17 @@
|
||||
# matically calculated from the server name and description. This is #
|
||||
# similar in behaviour to the server id on ircu and charybdis ircds. #
|
||||
# You should only need to set this manually if there is a collision #
|
||||
# between two server IDs on the network. The server ID must be #
|
||||
# between two server ID's on the network. The server ID must be #
|
||||
# between 1 and 999, if it is not, it will be wrapped to this range. #
|
||||
# There is a range of server IDs which are suffixed by two letters #
|
||||
# There is a range of server ID's which are suffixed by two letters #
|
||||
# rather than two numbers, e.g. 1AA, 2FF, 3ZZ, which are reserved #
|
||||
# for use by non-inspircd servers such as services and stats servers.#
|
||||
# #
|
||||
|
||||
<server name="penguin.omega.org.za"
|
||||
description="Waddle World"
|
||||
id="0"
|
||||
network="Omega">
|
||||
id="0"
|
||||
network="Omega">
|
||||
|
||||
|
||||
#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
|
||||
@ -90,7 +90,7 @@
|
||||
# Enter the port and address bindings here. #
|
||||
# #
|
||||
# bind address - specifies which address ports bind to. Leaving this #
|
||||
# field blank binds the port to all IPs available. #
|
||||
# field blank binds the port to all IP's available. #
|
||||
# #
|
||||
# port - The port number to bind to. You may specify a port #
|
||||
# range here, e.g. "6667-6669,7000,7001". If you do #
|
||||
@ -102,7 +102,7 @@
|
||||
# port number. #
|
||||
# #
|
||||
# type - can be 'clients' or 'servers'. The clients type is #
|
||||
# a standard tcp based socket, the servers type is a #
|
||||
# a standard TCP based socket, the servers type is a #
|
||||
# also a TCP based connection but of a different #
|
||||
# format. SSL support is provided by modules, to #
|
||||
# enable SSL support, please read the module section #
|
||||
@ -115,7 +115,7 @@
|
||||
# setting is ignored. #
|
||||
# #
|
||||
# transport - If you have m_spanningtree.so loaded, along with #
|
||||
# either of the SSL modules (m_ssl_gnutls or #
|
||||
# either one of the SSL modules (m_ssl_gnutls or #
|
||||
# m_ssl_openssl) or m_ziplinks.so, then you may make #
|
||||
# use of this value. #
|
||||
# setting it to 'openssl' or 'gnutls' or 'zip' #
|
||||
@ -134,7 +134,7 @@
|
||||
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
|
||||
# #
|
||||
# If you want to link servers to InspIRCd you must load the #
|
||||
# m_spanningtree module! Please see the modules list below for #
|
||||
# m_spanningtree.so module! Please see the modules list below for #
|
||||
# information on how to load this module! If you do not load this #
|
||||
# module, server ports will NOT be bound! #
|
||||
# #
|
||||
@ -145,21 +145,21 @@
|
||||
# <bind address="ip address" port="port" type="clients"> #
|
||||
# <bind address="ip address" port="port" type="servers"> #
|
||||
# #
|
||||
# If InspIRCd is built for IPV6, and you wish to accept IPV4 clients, #
|
||||
# then you can specify IPV4 ip addresses here to bind. You may also #
|
||||
# use the 4in6 notation, ::ffff:1.2.3.4, where 1.2.3.4 is the IPV4 #
|
||||
# If InspIRCd is built for IPv6, and you wish to accept IPv4 clients, #
|
||||
# then you can specify IPv4 ip addresses here to bind. You may also #
|
||||
# use the 4in6 notation, ::ffff:1.2.3.4, where 1.2.3.4 is the IPv4 #
|
||||
# address to bind the port, but as of InspIRCd 1.1.1, this is not #
|
||||
# required. #
|
||||
# #
|
||||
# ------------------------------------------------------------------- #
|
||||
# #
|
||||
# PLEASE NOTE: If you have build InspIRCd as an ipv6 server, and you #
|
||||
# PLEASE NOTE: If you have build InspIRCd as an IPv6 server, and you #
|
||||
# specify an empty bind address, the binding will be bound to ALL THE #
|
||||
# IPV6 IP ADDRESSES, and not the ipv4 addresses. If you are using an #
|
||||
# ipv6 enabled InspIRCd and want to bind to multiple IPV4 addresses #
|
||||
# IPv6 IP ADDRESSES, and not the IPv4 addresses. If you are using an #
|
||||
# IPv6 enabled InspIRCd and want to bind to multiple IPv4 addresses #
|
||||
# in this way, you must specify them by hand. If you have built the #
|
||||
# server for ipv4 connections only, then specifying an empty bind #
|
||||
# address binds the port to all ipv4 IP addresses, as expected. #
|
||||
# server for IPv4 connections only, then specifying an empty bind #
|
||||
# address binds the port to all IPv4 IP addresses, as expected. #
|
||||
# #
|
||||
|
||||
<bind address="" port="6000" type="clients">
|
||||
@ -176,7 +176,7 @@
|
||||
#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
|
||||
# #
|
||||
# You can configure the passwords here which you wish to use for #
|
||||
# the die and restart commands. Only trusted ircops who will #
|
||||
# the die and restart commands. Only trusted IRCop's who will #
|
||||
# need this ability should know the die and restart password. #
|
||||
# #
|
||||
# Syntax is as follows: #
|
||||
@ -222,7 +222,7 @@
|
||||
# <connect name="something" parent="myallow" pingfreq="60"> #
|
||||
# #
|
||||
# IP masks may be specified in CIDR format or wildcard format, #
|
||||
# for IPV4 and IPV6. You *cannot* use hostnames in the allow or #
|
||||
# for IPv4 and IPv6. You *cannot* use hostnames in the allow or #
|
||||
# deny field, as the state is applied before the user's DNS has #
|
||||
# been resolved. #
|
||||
# #
|
||||
@ -239,7 +239,7 @@
|
||||
# #
|
||||
# You may optionally include timeout="x" on any allow line, which #
|
||||
# specifies the amount of time given before an unknown connection #
|
||||
# is closed if USER/NICK/PASS are not given. This value is in secs #
|
||||
# is closed if USER/NICK/PASS are not given. This value is in secs. #
|
||||
# #
|
||||
# You should also include a flood="x" line which indicates #
|
||||
# the number of lines a user may place into their buffer at once #
|
||||
@ -257,7 +257,7 @@
|
||||
# settings as shown in the full example below. #
|
||||
# The ping frequency is specified in seconds, and the sendq size #
|
||||
# in bytes. It is recommended, although not enforced, that you #
|
||||
# should never set your sendq size to less than 8k. Send Queues are #
|
||||
# should never set your sendq size to less than 8K. Send Queues are #
|
||||
# dynamically allocated and can grow as needed up to the maximum #
|
||||
# size specified. #
|
||||
# #
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user