ouch/inspircd
2
0
Fork 0
mirror of https://github.com/inspircd/inspircd.git synced 2025-03-10 11:09:04 -04:00
Code Issues Packages Projects Releases Wiki Activity
inspircd/docs/inspircd.conf.example
frostycoolslug 11adc1c9b9 Fixed false example info in config. 
git-svn-id: http://svn.inspircd.org/repository/trunk/inspircd@1897 e03df62e-2008-0410-955e-edbf42e46eb7
2005-10-01 03:27:36 +00:00

745 lines
36 KiB
Plaintext
Raw Blame History

########################################################################
# #
# --------------------------- #
# InspIRCd Configuration File #
# --------------------------- #
# #
##################################||####################################
#||#
##################################||####################################
# #
# This is an example of the config file for InspIRCd. #
# Change the options to suit your network #
# #
# Last updated on : 06/06/2005 #
# Written by : CC (cc@backchat.co.za) #
# Updated by : katsklaw (katsklaw@gmail.com) #
########################################################################
#-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
# #
# Here is where you enter the information about your server. #
# #
# Syntax is as follows: #
# <server name="server.name" #
# description="Server Description" #
# network="MyNetwork"> #
# #
<server name="penguin.omega.org.za"
description="Waddle World"
network="Omega">
#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Describes the Server Administrator's real name, nick #
# and email address. #
# #
# Syntax is as follows: #
# <admin name="real name" #
# nick="nick name" #
# email="email@address.com"> #
# #
<admin name="Johnny English"
nick="MI5"
email="MI5@the.best.secret.agent">
#-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
# #
# Enter the port and address bindings here. #
# #
# bind address - specifies which the address which ports bind #
# port - opens an unused port #
# type - can be 'clients' or 'servers'. The clients type is #
# a standard tcp based socket, the servers type is a #
# also a TCP based connection but of a different #
# format. #
# default - if the port type is 'servers' then this can be #
# specified. If set to 'yes', it indicates that this #
# port is the default route for all /connect commands.#
# if you do not bind your default route to an #
# external ip, or all ip's, you may have connection #
# problems. #
# #
# Leaving address empty binds to all available interfaces #
# #
# Syntax is as follows: #
# #
# <bind address="ip number" port="port" type="clients"> #
# <bind address="ip number" port="port" type="servers"> #
# <bind address="ip number" port="port" type="servers" default="yes"> #
# #
<bind address="" port="6660" type="clients">
<bind address="" port="7000" type="servers" default="yes">
<bind address="" port="7001" type="servers">
#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
# #
# You can configure the passwords here which you wish to use for #
# the die and restart commands. Only trusted ircops who will #
# need this ability should know the die and restart password. #
# #
# Syntax is as follows: #
# <power diepass="die password" restartpass="restart password" #
# pause="secs before dying"> #
# #
<power diepass="diepass" restartpass="restartpass" pause="2">
#-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# This optional tag allows you to include another config file #
# allowing you to keep your configuration tidy. The configuration #
# file you include will be treated as part of the configuration file #
# which includes it, in simple terms the inclusion is transparent. #
# #
# All paths to config files are relative to the directory of the main #
# config file inspircd.conf, unless the filename starts with a forward#
# slash (/) in which case it is treated as an absolute path. #
# #
# Syntax is as follows: #
# <include file="file.conf"> #
# #
#-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
# #
# This is where you can configure which connections are allowed #
# and denied access onto your server. #
# The password is optional. #
# You may have as many of these as you require. #
# To allow/deny all connections use a * #
# #
# Syntax is as follows: #
# <connect allow="ip or host"> #
# <connect allow="ip or host" password="blahblah"> #
# <connect allow="ip or host" password="blah" timeout="10"> #
# <connect allow="ip or host" timeout="blah" flood="5"> #
# <connect allow="ip or host" threshold="8" pingfreq="120"> #
# <connect allow="ip or host" sendq="99999" revcq="696969"> #
# <connect deny="ip or host"> #
# #
# You may optionally include timeout="x" on any allow line, which #
# specifies the amount of time given before an unknown connection #
# is closed if USER/NICK/PASS are not given. This value is in secs #
# #
# You may also optionally include a flood="x" line which indicates #
# the number of lines a user may place into their buffer at once #
# before they are disconnected for excess flood. The default is to #
# DISABLE this feature. A recommended value is 10. A counter is #
# maintained for each user which is reset every 'threshold' seconds #
# and specifying this threshold value with threshold="X" indicates #
# how often the counter is reset. For example, with flood="5" and #
# threshold="8", the user may not send more than 5 lines in 8 secs. #
# #
# You may optionally specify the sendq size and ping frequency of #
# each connect:allow line using the pingfreq="X" and sendq="X" #
# settings as shown in the full example below. #
# The ping frequency is specified in seconds, and the sendq size #
# in bytes. It is recommended, although not enforced, that you #
# should never set your sendq size to less than 8k. Send Queues are #
# dynamically allocated and can grow as needed up to the maximum #
# size specified. #
# #
# The optional recvq value is the maximum size which users in this #
# group may grow their receive queue to. This is recommended to be #
# kept pretty low compared to the sendq, as users will always #
# recieve more than they send in normal circumstances. The default #
# if not specified is 4096. #
# #
# IMPORTANT NOTE, CALL THE CONFUSION POLICE! #
# The sendq is the data waiting to be sent TO THE USER. #
# The recvq is the data being received FROM THE USER. #
# The names sendq and recvq are from the SERVER'S PERSPECTIVE not #
# that of the user... Just to clear up any confusion or complaints #
# that these are backwards :p #
# #
<connect allow="196.12.*" password="secret">
<connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096">
<connect deny="69.254.*">
#-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
# #
# Classes are a group of commands which are grouped together #
# and given a unique name. They used to define which commands #
# are available to certain types of Operators. #
# #
# Syntax is as follow: #
# <class name="name" commands="oper commands"> #
# #
<class name="Shutdown" commands="DIE RESTART REHASH">
<class name="ServerLink" commands="CONNECT SQUIT">
<class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE SHUN">
<class name="OperChat" commands="WALLOPS CHATOPS">
<class name="HostCloak" commands="SETHOST SETIDENT SETNAME">
#-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-#
# #
# This is where you specify which types of operators you have on #
# your server, as well as the commands they are allowed to use. #
# This works alongside with the classes specified above. #
# #
# type name - a name for the combined class types #
# classes - specified above, used for flexibility for the #
# server admin to decide on which operators get #
# what commands #
# host - hostmask operators will recieve on oper-up. #
#(optional) #
# #
# Syntax is as follows: #
# <type name="name" classes="class name" host="oper hostmask"> #
# #
<type name="NetAdmin" classes="OperChat BanControl HostCloak Shutdown ServerLink" host="netadmin.omega.org.za">
<type name="GlobalOp" classes="OperChat BanControl HostCloak ServerLink" host="ircop.omega.org.za">
<type name="LocalOp" classes="OperChat BanControl HostCloak" host="local.omega.org.za">
<type name="Helper" classes="HostCloak" host="helper.omega.org.za">
#-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Opers are defined here. This is a very important section. #
# Remember to only make operators out of truthworthy people. #
# #
# name - oper name, best to use lower-case #
# password - password to oper-up, #
# encryption not supported by inspircd. However, there #
# are modules that allow for oper password encryption. #
# #
# host - host of client allowed to oper-up, more hostmasks #
# seperated by spaces, wildcards accepted #
# type - specified above, defines the kind of operator #
# #
# Syntax is as follows: #
# <oper name="login" #
# password="pass" #
# host="hostmask@of.oper" #
# type="oper type"> #
# #
<oper name="katsklaw"
password="s3cret"
host="*@*"
type="NetAdmin">
#-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# Defines which servers can link to this one, and which servers this #
# server may create outbound links to. #
# #
# name - The name is the canocial name of the server, it does #
# not have to resolve - but it is expected to be sent #
# in the remote servers connection info. #
# ipaddr - Valid host or ip address for remote server. * #
# port - Valid listening UDP port for remote server. #
# sendpass - Password to send to create an outbound connection to #
# this server. #
# recvpass - Password to receive to accept an inbound connection #
# from this server. #
# autoconnect - Sets the server to autoconnect. Where x is the number #
# (optional) of seconds between attempts. 300 = 5 minutes #
# #
# to u:line a server (give it extra privilages required for running #
# services, Q, etc) you must include the <uline server> tag as shown #
# in the example below. You can have as many of these as you like. #
# #
# WARNING: Unlike other ircds, u:lining a server allows ALL users on #
# that server to operoverride modes. This should only be used for #
# services and protected oper servers! #
# #
# IMPORTANT NOTE: When specifying the ip address and/or host, the #
# server software will prioritize RESOLVED hostnames above ip #
# addresses, so for example if your target server resolves to a.b.com #
# you MUST put a.b.com into your link block, and NOT the IP address #
# of a.b.com. The system uses reverse resolution. #
# #
<link name="hub.penguin.org"
ipaddr="penguin.box.com"
port="7000"
autoconnect="300"
sendpass="outgoing!password"
recvpass="incoming!password">
<link name="services.antarctic.com"
ipaddr="localhost"
port="7000"
sendpass="penguins"
recvpass="polarbears">
<uline server="services.antarctic.com">
#-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# These options let you define the path to your motd and rules #
# files. #
# #
<files motd="/home/cc/inspircd/conf/inspire.motd"
rules="/home/cc/inspircd/conf/inspire.rules">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Define your DNS server address here. InspIRCd has its own resolver #
# and you must define this otherwise nobody's host will resolve. The #
# timeout value is in seconds. #
# #
<dns server="127.0.0.1" timeout="5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Define the path to the PID file here. The PID file can be used to #
# rehash the ircd from the shell or to terminate the ircd from the #
# shell using shell scripts, perl scripts etc, and to monitor the #
# ircd's state via cron jobs. #
# #
<pid file="/path/to/inspircd.pid">
#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Use these tags to customise the ban limits on a per channel basis. #
# the tags are read from top to bottom, and any tag found which #
# matches the channels name applies the banlimit to that channel. #
# It is advisable to put an entry with the channel as '*' at the #
# bottom of the list. If none are specified or no maxbans tag is #
# matched, the banlist size defaults to 64 entries. #
# #
<banlist chan="#morons" limit="128">
<banlist chan="*" limit="69">
#-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# This tag is optional, and specifies one or more commands which are #
# not available to non-operators. For example you may wish to disable #
# NICK and prevent non-opers from changing their nicknames. #
# Note that any disabled commands take effect only after the user has #
# 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
# so for example disabling NICK will not cripple your network. #
# #
# <disabled commands="TOPIC MODE"> #
# #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Just remove this... Its here to make you read ALL of the config #
# file options ;) #
<die value="You should probably edit your config *PROPERLY* and try again.">
#-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Settings to define which features are useable on your server. #
# #
# prefixquit - a prefix for a client's quit message #
# loglevel - specifies what detail of messages to log in the #
# log file. You may select from debug, verbose, #
# default, sparse and none. #
# allowhalfop - allows the +h channel mode #
# noservices - If noservices is true, yes, or 1, then the first #
# user into a channel gets founder status. This is #
# only useful on networks running the m_chanprotect #
# module without services. #
# netbuffersize - size of the buffer used to receive data from #
# clients. The ircd may only read() this amount #
# of text in one go at any time. (OPTIONAL) #
# maxwho - The maximum number of results returned by a /WHO #
# query. This is to prevent /WHO being used as a #
# spam vector or means of flooding an ircd. The #
# default is 128, it is not recommended to raise it #
# above 1024. Values up to 65535 are permitted. #
# somaxconn - The maximum number of sockets that may be waiting #
# in the accept queue. This usually allows the ircd #
# to soak up more connections in a shorter space of #
# time when increased but please be aware there is a #
# system defined maximum value to this, the same way #
# there is a system defined maximum number of file #
# descriptors. Some systems may only allow this to #
# be up to 5 (ugh) while others such as FreeBSD will #
# default to a much nicer 128. #
# moduledir - This optional value indicates a runtime change of #
# the location where modules are to be found. This #
# does not add a supplementary directory. There can #
# only be one module path. #
# softlimit - This optional feature allows a defined softlimit. #
# if defined sets a soft maxconnections value, has #
# to be less than the ./configure maxclients #
# #
<options prefixquit="Quit: "
loglevel="default"
netbuffersize="10240"
maxwho="128"
noservices="0"
somaxconn="128"
softlimit="128"
allowhalfop="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# These tags define which modules will be loaded on startup by your #
# server. Add modules without any paths. When you make your ircd #
# using the 'make' command, all compiled modules will be moved into #
# the folder you specified when you ran ./configure. The module tag #
# automatically looks for modules in this location. #
# If you attempt to load a module outside of this location, either #
# in the config, or via /LOADMODULE, you will receive an error. #
# #
# By default, ALL modules are commented out. You must uncomment them #
# or add lines to your config to load modules. Please refer to #
# http://www.inspircd.org/wiki/Modules_List for a list of modules and#
# each modules link for any additional conf tags they require. #
# #
# WINDOWS USERS PLEASE NOTE: You can still load these modules! They #
# are incorporated into the executable and can be loaded and removed #
# similarly to if they were in a ramdisk. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Foobar module - does nothing
#<module name="m_foobar.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Chanprotect module: gives +q and +a channel modes
#<module name="m_chanprotect.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Globops module: gives /GLOBOPS and usermode +g
#<module name="m_globops.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Noinvite module: Gives channel mode +V
#<module name="m_noinvite.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper MD5 module: Allows MD5 hashed oper passwords
#<module name="m_opermd5.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restricted channels module: Allows only opers to create channels
#<module name="m_restrictchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deny Channels: Deny Channels from being used by users
#<module name="m_denychans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Services support module: Adds several usermodes such as +R and +M
#<module name="m_services.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Userip module: Adds the /USERIP command
#<module name="m_userip.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alias module: Allows you to define server-side command aliases
#<module name="m_alias.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGHOST module: Adds the /CHGHOST command
#<module name="m_chghost.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HELPOP module: Provides the /HELPOP command
#<module name="m_helpop.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No kicks module: Adds the +Q channel mode
#<module name="m_nokicks.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper MOTD module: Provides support for seperate message of the day
# on oper-up
#<module name="m_opermotd.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restrict message module: Allows users to only message opers
#<module name="m_restrictmsg.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Sethost module: Adds the /SETHOST command
#<module name="m_sethost.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Antibottler module: Labels bottler leech bots
#<module name="m_antibottler.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Watch module: Adds the WATCH command, which is used by clients to
# maintain notify lists.
#<module name="m_watch.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Cloaking module: Adds usermode +x and cloaking support
#<module name="m_cloaking.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hostchange module: Allows a different style of cloaking
#<module name="m_hostchange.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No nicks module: Adds the +N channel mode
#<module name="m_nonicks.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Override module: Adds support for oper override
#<module name="m_override.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAJOIN module: Adds the /SAJOIN command
#<module name="m_sajoin.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Set Idle module: Adds a command for opers to change their
# idle time (mainly a toy)
#<module name="m_setidle.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block colour module: Adds the +c channel mode
#<module name="m_blockcolor.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Lusers: Shows the LUSERS output on connect
#<module name="m_conn_lusers.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ident: Provides RFC 1413 ident lookup support
#<module name="m_ident.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No Notice module: adds the channel mode +T
#<module name="m_nonotice.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Parking module: Adds parking support and /PARK and /UNPARK
#<module name="m_park.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAMODE module: Adds the oper /SAMODE command
#<module name="m_samode.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SETNAME module: Adds the /SETNAME command
#<module name="m_setname.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Botmode module: Adds the user mode +B
#<module name="m_botmode.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides glob-based message filtering
#<module name="m_filter.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Knock module: adds the /KNOCK command and +K channel mode
#<module name="m_knock.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper channels mode: Adds the +O channel mode
#<module name="m_operchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Random Quote module: provides a random quote on connect
#<module name="m_randquote.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SANICK module: Allows opers to change user's nicks
#<module name="m_sanick.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Show Whois module: Adds the +W usermode which allows opers
# to see when they are whois'ed
#<module name="m_showwhois.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Strip colour module: Adds the channel mode +S
#<module name="m_stripcolor.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Censor module: Adds the channel mode +G
#<module name="m_censor.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nick locking module: Adds the oper-only /NICKLOCK command
#<module name="m_nicklock.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper Join module: Forces opers to join a channel on oper-up
#<module name="m_operjoin.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Redirect module: Adds channel redirection (mode +L)
#<module name="m_redirect.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAPART module: Adds the oper /SAPART command
#<module name="m_sapart.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SILENCE module: Adds support for /SILENCE
#<module name="m_silence.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Test command module: Does nothing significant
#<module name="m_testcommand.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel filter module: Allows channel-op defined message
# filtering using simple string matches (channel mode +g)
#<module name="m_chanfilter.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No ctcp module: Adds the channel mode +C to block CTCPs
#<module name="m_noctcp.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper levels module: Gives each oper a level and prevents
# actions being taken against higher level opers
#<module name="m_operlevels.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remove module: Adds the /REMOVE command which is a peaceful
# alternative to /KICK
#<module name="m_remove.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
#<module name="m_saquit.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Timed bans module: Adds timed bans and the /TBAN command
#<module name="m_timedbans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper modes module: Allows you to specify modes to add/remove on oper
#<module name="m_opermodes.so">
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_filter.so module, then #
# specfiy below the path to the filter.conf file. #
#<filter file="/path/to/inspircd/filter.conf">
#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_helpop.so module, then #
# specify below the path to the helpop.conf file. #
<die value="If you used the helpop include above then do *NOT* use this tag.">
#<helpop file="/path/to/inspircd/helpop.conf">
#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_randquotes.so module, then #
# specify below the path to the randquotes.conf file. #
#<randquote file="/path/to/inspircd/randquotes.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# The ban tags define nick masks, host masks and ip ranges which are #
# banned from your server. All details in these tags are local to #
# Your server. #
# #
# #
# badip lines ban an ip range (same as a zline) #
# #
# ipmask - The ip range to ban (wildcards possible) #
# reason - Reason to display when disconnected #
# #
# badnick lines ban a nick mask (same as a qline) #
# #
# nick - Nick mask to ban (wildcards possible) #
# reason - Reason to display on /NICK #
# #
# badhost lines ban a user@host mask (same as a kline) #
# #
# host - ident@hostname (wildcards possible) #
# reason - Reason to display on disconnection #
# #
# exception lines define a hostmask that is excempt from [kzg]lines #
# #
# host - ident@hostname (wildcards possible) #
# reason - Reason, shown only in /stats e #
# #
<badip ipmask="69.69.69.69" reason="No porn here thanks.">
<badnick nick="ChanServ" reason="Reserved For Services">
<badnick nick="NickServ" reason="Reserved For Services">
<badnick nick="OperServ" reason="Reserved For Services">
<badnick nick="MemoServ" reason="Reserved For Services">
<badhost host="*@hundredz.n.hundredz.o.1337.kiddies.com" reason="Too many 1337 kiddiots">
<badhost host="*@localhost" reason="No irc from localhost!">
<exception host="*@ircop.host.com" reason="Opers hostname">
#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_alias.so module loaded, you may also define #
# aliases as shown below. They are commonly used to provide shortcut #
# commands to services, however they are not limited to jsut this use.#
# An alias tag requires the following values to be defined in it: #
# #
# text - The text to detect at the start of the line, #
# must be at the start of the line to trigger the #
# alias. May contain spaces, but case insensitive. #
# replace - The text to replace 'text' with. Usually this #
# will be "PRIVMSG ServiceName :" or similar. #
# requires - If you provide a value for 'requires' this means #
# the given nickname MUST be online for the alias #
# to successfully trigger. If they are not, then #
# the user receives a 'no such nick' 401 numeric. #
# uline - Defining this value with 'yes', 'true' or '1' #
# will ensure that the user given in 'requires' #
# must also be on a u-lined server, as well as #
# actually being on the network. If the user is #
# online, but not on a u-lined server, then an #
# oper-alert is sent out as this is possibly signs #
# of a user trying to impersonate a service. #
# #
<alias text="NICKSERV" replace="PRIVMSG NickServ :" requires="NickServ" uline="yes">
<alias text="CHANSERV" replace="PRIVMSG ChanServ :" requires="ChanServ" uline="yes">
<alias text="NS" replace="PRIVMSG NickServ :" requires="NickServ" uline="yes">
<alias text="CS" replace="PRIVMSG ChanServ :" requires="ChanServ" uline="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# You should already know what to do here :) #
<die value="You should probably edit your config *PROPERLY* and try again.">
#########################################################################
# #
# -InspIRCd Development and Coding Team- #
# www.inspircd.org #
# #
#########################################################################
Reference in New Issue View Git Blame Copy Permalink