ouch/inspircd
2
0
Fork 0
mirror of https://github.com/inspircd/inspircd.git synced 2025-03-10 02:59:01 -04:00
Code Issues Packages Projects Releases Wiki Activity
inspircd/conf/modules.conf.example
danieldg 6c8961f569 Update example configs for SSL changes [dKingston] 
git-svn-id: http://svn.inspircd.org/repository/trunk/inspircd@11815 e03df62e-2008-0410-955e-edbf42e46eb7
2009-10-09 22:41:05 +00:00

1795 lines
88 KiB
Plaintext
Raw Blame History

#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# These tags define which modules will be loaded on startup by your #
# server. Add modules without any paths. When you make your ircd #
# using the 'make' command, all compiled modules will be moved into #
# the folder you specified when you ran ./configure. The module tag #
# automatically looks for modules in this location. #
# If you attempt to load a module outside of this location, either #
# in the config, or via /LOADMODULE, you will receive an error. #
# #
# By default, ALL modules are commented out. You must uncomment them #
# or add lines to your config to load modules. Please refer to #
# http://wiki.inspircd.org/Modules for a list of modules and #
# each modules link for any additional conf tags they require. #
# #
# You may use wildcards in a <module> tag to load all modules which #
# match a glob pattern (e.g. m_sa????.so would load m_sajoin, #
# m_sapart, m_saquit and m_sanick) #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# To link servers to InspIRCd, you MUST load the m_spanningtree #
# module. Since several features (like SSL server links) rely on #
# other modules being loaded before m_spanningtree, the module itself #
# is at the bottom of this file. DO NOT forget to load it. If you DO #
# NOT do this, server links will NOT work at all. ie. The ports will #
# NOT bind, and /connect will not work properly. This is by design, #
# to allow for the implementation of other linking protocols in #
# modules in the future. #
# #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MD5 Module - Allows other modules to generate MD5 hashes, usually for
# cryptographic uses and security.
#
# IMPORTANT:
# Other modules such as m_cloaking.so and m_password_hash.so may rely on
# this module being loaded to function.
#
#<module name="m_md5.so">
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SHA256 Module - Allows other modules to generate SHA256 hashes,
# usually for cryptographic uses and security.
#
# IMPORTANT:
# Other modules such as m_password_hash.so may rely on this module being
# loaded to function. Certain modules such as m_spanningtree.so will
# function without this module but when it is loaded their features will
# be enhanced (for example the addition of HMAC authentication).
#
#<module name="m_sha256.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# RIPEMD160 Module - Allows other modules to generate RIPEMD160 hashes,
# usually for cryptographic uses and security.
#
# IMPORTANT:
# Other modules may rely on this module being loaded to function.
#<module name="m_ripemd160.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Abbreviation module: Provides the ability to abbreviate commands a-la
# BBC BASIC keywords.
#<module name="m_abbreviation.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alias module: Allows you to define server-side command aliases
#<module name="m_alias.so">
#
# Fantasy settings:
#
#<fantasy prefix="!" allowbots="no">
#
# prefix:
# Set the prefix for in-channel aliases (fantasy commands) to the
# specified character. If not set, the default is "!".
# allowbots:
# If this is set to no, +B clients will not be able to use fantasy
# commands. If not set, the default is no.
#
#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_alias.so module loaded, you may also define #
# aliases as shown below. They are commonly used to provide shortcut #
# commands to services, however they are not limited to just this use.#
# An alias tag requires the following values to be defined in it: #
# #
# text - The text to detect as the actual command line, #
# Cant contain spaces, but case insensitive. #
# You may have multiple aliases with the same #
# command name (text="" value), however the first #
# found will be executed if its format value is #
# matched, or it has no format value. Aliases are #
# read from the top of the file to the bottom. #
# #
# usercommand - If this is true, the alias can be run simply as #
# /aliasname. Defaults to true. #
# #
# channelcommand - If this is true, the alias can be used as an #
# in-channel alias or 'fantasy command', prefixed #
# by the fantasy prefix character, !aliasname by #
# default. Defaults to false. #
# #
# format - If this is defined, the parameters of the alias #
# must match this glob pattern. For example if you #
# want the first parameter to start with a # for #
# the alias to be executed, set format="#*" in the #
# alias definition. Note that the :'s which are #
# part of IRC formatted lines will be preserved #
# for matching of this text. This value is #
# optional. #
# #
# replace - The text to replace 'text' with. Usually this #
# will be "PRIVMSG ServiceName :$2-" or similar. #
# You may use the variables $1 through $9 in the #
# replace string, which refer to the first through #
# ninth word in the original string typed by the #
# user. You may also use $1- through $9- which #
# refer to the first word onwards, through to the #
# ninth word onwards, e.g. if the user types the #
# command "foo bar baz qux quz" then $3- will hold #
# "baz qux quz" and $2 will contain "bar". You may #
# also use the special variables: $nick, $ident, #
# $host and $vhost, and you may separate multiple #
# commands with \n. If you wish to use the ACTUAL #
# characters \ and n together in a line, you must #
# use the sequence "\\n". #
# #
# requires - If you provide a value for 'requires' this means #
# the given nickname MUST be online for the alias #
# to successfully trigger. If they are not, then #
# the user receives a 'no such nick' 401 numeric. #
# #
# uline - Defining this value with 'yes', 'true' or '1' #
# will ensure that the user given in 'requires' #
# must also be on a u-lined server, as well as #
# actually being on the network. If the user is #
# online, but not on a u-lined server, then an #
# oper-alert is sent out as this is possibly signs #
# of a user trying to impersonate a service. #
# #
# operonly - Defining this value, with a value of 'yes', '1' #
# or true will make the alias oper only. If a non- #
# oper attempts to use the alias, it will appear #
# to not exist. #
# #
#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
#<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
#<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
#<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
#<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
#<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
#<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
#
# An example of using the format value to create an alias with two
# different behaviours depending on the format of the parameters.
#
#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
# requires="ChanServ" uline="yes">
#
#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
# requires="NickServ" uline="yes">
#
# This alias fixes a glitch in xchat 2.6.x and above and the way it
# assumes IDENTIFY must be prefixed by a colon (:) character. It should
# be placed ABOVE the default NICKSERV alias (the first example) listed
# above.
#
#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
# requires="NickServ" uline="yes">
#
# You may also add aliases to trigger based on something said in a
# channel, aka 'fantasy' commands, configured in the same manner as any
# other alias, with usercommand="no" and channelcommand="yes" The
# command must be preceded by the fantasy prefix when used.
#
#<alias text="CS" usercommand="no" channelcommand="yes"
# replace="PRIVMSG ChanServ :$1 $chan $2-" requires="ChanServ" uline="yes">
#
# This would be used as "!cs <command> <options>", with the channel
# being automatically inserted after the command in the message to
# ChanServ, assuming the fantasy prefix is "!".
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Allowinvite module: Gives channel mode +A to allow all users to use
# /invite, and extban A to deny invite from specific masks
#<module name="m_allowinvite.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alltime module: Shows time on all connected servers at once.
# This module is oper-only and provides /alltime.
# To use, ALLTIME must be in one of your oper class blocks.
#<module name="m_alltime.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Antibear security module: Prevents 'bear.txt' based trojans from
# connecting to your network by sending them a numeric they can't handle.
#<module name="m_antibear.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Antibottler module: Labels bottler leech bots
#<module name="m_antibottler.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Auditorium module: Adds channel mode +u which makes everyone else
# except you in the channel invisible, used for large meetings etc.
#<module name="m_auditorium.so">
#
# Auditorium settings:
#
#<auditorium showops="no" operoverride="no">
#
# showops:
# Setting this value to yes makes m_auditorium behave like unrealircd
# +u channel mode, e.g. ops see users joining, parting, etc, and users
# joining the channel see the ops. Without this flag, the mode acts
# like ircnet's +a (anonymous channels), showing only the user in the
# names list, and not even showing the ops in the list, or showing the
# ops that the user has joined.
# operoverride:
# Setting this value to yes makes m_auditorium affect the userlist for
# regular users only. Opers will view all users in the channel normally.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ban except module: Adds support for channel ban exceptions (+e)
#<module name="m_banexception.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ban redirection module: Allows bans which redirect to a specified
# channel. e.g. +b nick!ident@host#channelbanneduserissentto
#<module name="m_banredirect.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block amsg module: Attempt to block all usage of /amsg and /ame
#<module name="m_blockamsg.so">
#
#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_blockamsg.so module loaded, you can configure it #
# with the <blockamsg> tag: #
# #
# delay - How many seconds between two messages to force #
# them to be recognised as unrelated. #
# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
# or 'killopers'. Define how to take action when #
# a user uses /amsg or /ame. #
#
#<blockamsg delay="3" action="killopers">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block CAPS module: Blocking all-CAPS messages with cmode +B
#<module name="m_blockcaps.so">
# #
#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# percent - How many percent of text must be caps before text #
# will be blocked. #
# #
# minlen - The minimum length a line must be for the block #
# percent to have any effect. #
# #
# capsmap - A list of chars to be considered CAPS, this was #
# you can add CAPS for your language. Also you can #
# add things like ! and space to further lock down #
# on caps usage. #
#<blockcaps percent="50"
# minlen="5"
# capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block colour module: Blocking colour-coded messages with cmode +c
#<module name="m_blockcolor.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Botmode module: Adds the user mode +B
#<module name="m_botmode.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CallerID module: Adds usermode +g which activates hybrid-style
# callerid (== block all private messages unless you /accept first)
#<module name="m_callerid.so">
#
#-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# maxaccepts - Maximum number of entires a user can add to his #
# /accept list. Default is 16 entries. #
# operoverride - Can opers (note: ALL opers) ignore callerid mode? #
# Default is no. #
# tracknick - Preserve /accept entries when a user changes nick? #
# If no (the default), the user is removed from #
# everyone's accept list if he changes nickname. #
# cooldown - Amount of time (in seconds) that must pass since #
# the last notification sent to a user before he can #
# be sent another. Default is 60 (1 minute). #
#<callerid maxaccepts="16"
# operoverride="no"
# tracknick="no"
# cooldown="60">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CAP module: Provides the CAP negotiation mechanism seen in
# ratbox-derived ircds
#<module name="m_cap.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CBAN module: Lets you disallow channels from being used at runtime.
# This module is oper-only and provides /cban.
# To use, CBAN must be in one of your oper class blocks.
#<module name="m_cban.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Censor module: Adds the channel mode +G
#<module name="m_censor.so">
#
#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_censor module, then you must #
# specify some censor tags. See also: #
# http://wiki.inspircd.org/Modules/censor #
#
#<include file="censor.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
# (http://cgiirc.sourceforge.net).
#<module name="m_cgiirc.so">
#
#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#
# Optional - If you specify to use m_cgiirc, then you must specify one
# or more cgihost tags which indicate authorised CGI:IRC servers which
# will be connecting to your network, and an optional cgiirc tag.
# For more information see: http://wiki.inspircd.org/Modules/cgiirc
#
# Set to yes if you want to notice opers when CGI clients connect
# <cgiirc opernotice="no">
#
# The type field indicates where the module should get the real
# client's IP address from, for further information, please see the
# CGI:IRC documentation.
#
# Old style:
# <cgihost type="pass" mask="www.mysite.com"> # Get IP from PASS
# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
# <cgihost type="passfirst" mask="www.mysite.com"> # See the docs
# New style:
# <cgihost type="webirc" password="foobar"
# mask="somebox.mysite.com"> # Get IP from WEBIRC
#
# IMPORTANT NOTE:
# ---------------
#
# When you connect CGI:IRC clients, there are two connect classes which
# apply to these clients. When the client initially connects, the connect
# class which matches the cgi:irc site's host is checked. Therefore you
# must raise the maximum local/global clients for this ip as high as you
# want to allow cgi clients. After the client has connected and is
# determined to be a cgi:irc client, the class which matches the client's
# real IP is then checked. You may set this class to a lower value, so that
# the real IP of the client can still be restricted to, for example, 3
# sessions maximum.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel create module: Adds snomask +j, which will notify opers of
# any new channels that are created.
# This module is oper-only.
#<module name="m_chancreate.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel filter module: Allows channel-op defined message
# filtering using simple string matches (channel mode +g)
#<module name="m_chanfilter.so">
#
# If hidemask is set to yes, the user will not be shown the mask when
# his/her message is blocked.
#<chanfilter hidemask="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel logging module: used to send snotice output to channels, to
# allow staff to centrally monitor and discuss network activity.
#
# The "channel" field is where you want the messages to go, "snomasks"
# is what snomasks you want to be sent to that channel. Multiple tags
# are allowed.
#<module name="m_chanlog.so">
#<chanlog snomasks="AOcC" channel="#opers">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channelban: Implements extended ban j:, which stops anyone in already
# in a channel matching a mask like +b j:#channel*mask from joining.
#<module name="m_channelban.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Chanprotect module: gives +q and +a channel modes
#<module name="m_chanprotect.so">
<chanprotect
# noservices: With this set to yes, when a user joins a empty channel,
# the server will set +q on them. If set to no, it will only set +o
# on them until they register the channel.
noservices="no"
# qprefix: Prefix (symbol) to use for +q users.
qprefix="~"
# aprefix: Prefix (symbol) to use for +a users.
aprefix="&"
# deprotectself: If this value is set (true, yes or 1), it will allow
# +a and +q users to remove the +a and +q from themselves, otherwise,
# the status will have to be removed by services.
deprotectself="yes"
# deprotectothers: If this value is set to yes, true, or 1, then any
# user with +q or +a may remove the +q or +a from other users.
deprotectothers="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Check module: gives /check
# Check is useful for looking up information on channels,
# users, IP addresses and hosts.
# This module is oper-only.
# To use, CHECK must be in one of your oper class blocks.
#<module name="m_check.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGHOST module: Adds the /CHGHOST command
# This module is oper-only.
# To use, CHGHOST must be in one of your oper class blocks.
# NOTE: Services will not be able to set vhosts on users if this module
# isn't loaded. If you're planning on running services, you probably
# want to load this.
#<module name="m_chghost.so">
#
#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-#
# Optional - If you want to use special chars for hostnames you can #
# specify your own custom list of chars with the <hostname> tag: #
# #
# charmap - A list of chars accepted as valid by the /CHGHOST #
# and /SETHOST commands. Also note that the list is #
# case-sensitive. #
#<hostname charmap="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ.-_/0123456789">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGIDENT module: Adds the /CHGIDENT command
# This module is oper-only.
# To use, CHGIDENT must be in one of your oper class blocks.
#<module name="m_chgident.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGNAME module: Adds the /CHGNAME command
# This module is oper-only.
# To use, CHGNAME must be in one of your oper class blocks.
#<module name="m_chgname.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Cloaking module: Adds usermode +x and cloaking support.
# Relies on the module m_md5.so being loaded before m_cloaking.so in
# the configuration file.
# To use, you should enable m_conn_umodes and add +x as
# an enabled mode. See the m_conn_umodes module for more information.
#<module name="m_cloaking.so">
#
#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify the m_cloaking.so module as above, you #
# must define cloak keys, and optionally a cloak prefix as shown #
# below. When using cloaking, the cloak keys are MANDITORY and must #
# be included. However, if prefix is not included, it will default #
# to your networks name from the <server> tag. You can also include #
# the following optional values: #
# #
# ipalways - Always cloak the IP address, not the hostname, #
# which doesn't reveal the user's ISP, but #
# results in hosts that are harder to read and #
# ban. #
# #
# lowercase - Display the cloaked hostnames in lowercase #
# characters instead of uppercase #
# #
# <cloak key1="0x2AF39F40" #
# key2="0x78E10B32" #
# key3="0x4F2D2E82" #
# key4="0x043A4C81" #
# prefix="mynet" #
# ipalways="false" #
# lowercase="false"> #
# #
# Please note that the key values will accept any number, and should #
# be large numbers. Using small numbers such as "7" or "1924" will #
# seriously weaken the security of your cloak. It is recommended you #
# use hexdecimal numbers prefixed by "0x", as shown in this example, #
# with each key eight hex digits long. #
#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Close module: Allows an oper to close all unregistered connections.
# This module is oper-only and provides /close.
# To use, CLOSE must be in one of your oper class blocks.
#<module name="m_close.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Clones module: Adds an oper command /CLONES for detecting cloned
# users. Warning: This module may be resource intensive when its
# command is issued, use with care.
# This module is oper-only.
# To use, CLONES must be in one of your oper class blocks.
#<module name="m_clones.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Common channels module: Adds user mode +c, which, when set, requires
# that users must share a common channel with you to PRIVMSG or NOTICE
# you.
#<module name="m_commonchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Join: Allows you to force users to join one or more channels
# automatically upon connecting to the server.
#<module name="m_conn_join.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
# If you have m_conn_join.so loaded, you can configure it using the
# follow values:
#
#<autojoin channel="#one,#two,#three">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Usermodes: Set modes on users when they connect
# When this module is loaded <connect:allow> tags may have an optional
# modes="" value, which contains modes to add or remove from users
# when they connect to the server.
#<module name="m_conn_umodes.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Wait-for-Pong: Don't let a user connect until they PONG
#<module name="m_conn_waitpong.so">
#
#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_conn_waitpong.so module loaded, configure it with #
# the <waitpong> tag: #
# #
# sendsnotice - Whether to send a snotice on connect, like other #
# older ircds #
# #
# killonbadreply - Whether to kill the user if they send the wrong #
# PONG reply. #
# #
#<waitpong sendsnotice="yes" killonbadreply="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel cycle module. Server side /hop, with +ilk etc bypass.
#<module name="m_cycle.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connectban: Provides IP connection throttling. Any IP range that connects
# too many times (configurable) in an hour is zlined for a (configurable)
# duration, and their count resets to 0.
#
# ipv4cidr and ipv6cidr allow you to turn the comparison from individual
# IP addresses (32 and 128 bits) into CIDR masks, to allow for throttling
# over whole ISPs/blocks of IPs, which may be needed to prevent attacks.
#
#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128">
# This allows for 10 connections in an hour with a 10 minute ban if that is exceeded.
#
#<module name="m_connectban.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connection throttle module. Configuration:
#<module name="m_connflood.so">
#
#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# seconds, maxconns - Amount of connections per <seconds>.
#
# timeout - Time to wait after the throttle was activated
# before deactivating it. Be aware that the time
# is seconds + timeout.
#
# quitmsg - The message that users get if they attempt to
# connect while the throttle is active.
#
# bootwait - Amount of time to wait before enforcing the
# throttling when the server just booted.
#
#<connflood seconds="30" maxconns="3" timeout="30"
# quitmsg="Throttled" bootwait="10">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Custom title module: Adds the /TITLE command which allows for trusted
# users to gain a custom whois line and a optional
# vhost can be specified.
#<module name="m_customtitle.so">
#
#-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# name - The username used to identify
# password - The password used to identify
# hash - The hash for the specific user's password (optional)
# m_password_hash.so and a hashing module must be loaded for this to work
# host - Allowed hostmask [optional]
# title - Title shown in whois
# vhost - Displayed host [optional]
#
#<title name="foo" password="bar" title="Official Chat Helper">
#<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat">
#<title name="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" title="Official Chat Helper">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DCCALLOW module: Adds the /DCCALLOW command
#<module name="m_dccallow.so">
#
#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# blockchat - Whether to block DCC CHAT as well as DCC SEND
# length - Default duration of entries in DCCALLOW list
# action - Default action to take if no action is specified
# can be 'block' or 'allow'
#
# File configuration:
# pattern - The glob pattern to match against
# action - Action to take if a user attempts to send a file
# that matches this pattern, can be 'block' or 'allow'
#
#<dccallow blockchat="yes" length="5m" action="block">
#<banfile pattern="*.exe" action="block">
#<banfile pattern="*.txt" action="allow">
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deaf module: adds support for ircu style usermode +d - deaf to
# channel messages and channel notices.
#<module name="m_deaf.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Delay join module: Adds the channel mode +D which delays all JOIN
# messages from users until they speak. If they quit or part before
# speaking, their quit or part message will not be shown to the channel
# which helps cut down noise on large channels in a more friendly way
# than the auditorium mode. Only channel ops may set the +D mode.
#<module name="m_delayjoin.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Delay message module: Adds the channel mode +d which disallows a user
# from talking in the channel unless they've been joined for X seconds.
# Settable a la: /mode +d 30
#<module name="m_delaymsg.so>
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deny Channels: Deny Channels from being used by users
#<module name="m_denychans.so">
#
#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_denychans.so module loaded, you need to specify #
# the channels to deny: #
# #
# name - The channel name to deny. (glob masks are ok) #
# #
# allowopers - If operators are allowed to override the deny. #
# #
# reason - Reason given for the deny. #
# #
# redirect - Redirect the user to a different channel #
# #
#<badchan name="#gods*" allowopers="yes" reason="Tortoises!"> #
#<badchan name="#heaven" redirect="#hell" reason="Nice try!"> #
# #
# Redirects will not work if the target channel is set +L. #
# #
# Additionally, you may specify channels which are allowed, even if #
# a badchan tag specifies it would be denied: #
#<goodchan name="#godsleeps"> #
# Glob masks are accepted here also.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Devoice Module: Let users devoice themselves.
#<module name="m_devoice.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DNS Blacklist Module: Provides support for looking up IPs on one or #
# more blacklists. #
#<module name="m_dnsbl.so"> #
# #
# For configuration options please see the wiki page for m_dnsbl at #
# http://wiki.inspircd.org/Modules/dnsbl #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides message filtering, similar to SPAMFILTER.
#<module name="m_filter.so">
# #
# This module depends upon a regex provider such as m_regex_pcre or #
# m_regex_glob to function. You must specify which of these you want #
# m_filter to use via the tag below. #
# #
# Valid engines are: #
# #
# glob - Glob patterns, provided via m_regex_glob.so #
# pcre - PCRE regexps, provided via m_regex_pcre.so, needs libpcre #
# tre - TRE regexps, provided via m_regex_tre.so, requires libtre #
# posix - POSIX regexps, provided via m_regex_posix.so, not availale #
# on windows, no dependencies on other operating systems. #
# #
#<filteropts engine="glob"> #
# #
# Your choice of regex engine must match on all servers network-wide.
#
# You may specify specific channels that are exempt from being filtered:
#<exemptfromfilter channel="#blah">
#
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_filter module, then #
# specfiy below the path to the filter.conf file, or define some #
# <filter> tags. #
# #
#<include file="filter.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Gecosban: Implements extended ban r:, which stops anyone matching
# a mask like +b r:*realname?here* from joining a channel.
#<module name="m_gecosban.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GeoIP module: Allows the server admin to ban users by country code.
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_geoip.cpp
# and run make install, then uncomment this module to enable it.
# This module requires GeoIP to be installed on your system,
# use your package manager to find the appropriate packages
# or check the InspIRCd wiki page for this module.
#<module name="m_geoip.so">
#
#-#-#-#-#-#-#-#-#-#-#-# GEOIP CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
# #
# <geoip banunknown="false"> #
# #
# Set this value to true or yes to block unknown IP ranges which are #
# not in the database (usually LAN addresses, localhost, etc) #
# #
# <geoban country="TR" reason="This country not permitted"> #
# #
# Use one or more of these tags to ban countries by country code. #
# The country code must be in capitals and should be an ISO country #
# code such as TR, GB, or US. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Globops module: gives /GLOBOPS and SNOMASK +g
# This module is oper-only.
# To use, GLOBOPS must be in one of your oper class blocks.
#<module name="m_globops.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Global load module: Allows loading and unloading of modules network-
# wide (USE WITH EXTREME CAUTION!)
# This module is oper-only and provides /gloadmodule, /gunloadmodule
# and /greloadmodule.
# To use, GLOADMODULE, GUNLOADMODULE and GRELOADMODULE
# must be in one of your oper class blocks.
#<module name="m_globalload.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HELPOP module: Provides the /HELPOP command
#<module name="m_helpop.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_helpop.so module, then #
# specify below the path to the helpop.conf file, or if you like to #
# make a mess, define your helpop tags in this conf. #
# #
#<include file="helpop.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HIDECHANS module: Allows opers to hide their channels list from non-
# opers by setting user mode +I on themselves.
# <module name="m_hidechans.so">
#
# HIDECHANS can optionally prevent opers from seeing channels on a +I
# user, for more privacy if set to true.
# This setting is not recommended for most mainstream networks.
#<hidechans affectsopers="false">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HIDEOPER module: Allows opers to hide their oper status from non-
# opers by setting user mode +H on themselves.
# This module is oper-only.
# <module name="m_hideoper.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hostchange module: Allows a different style of cloaking
#<module name="m_hostchange.so">
#
#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you choose to use the m_hostchange.so module. #
# Config Help - See http://wiki.inspircd.org/Modules/hostchange #
# #
#<host suffix="polarbears.org" separator="." prefix="">
#<hostchange mask="*@fbi.gov" action="addnick">
#<hostchange mask="*r00t@*" action="suffix">
#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# httpd module: Provides http server support for InspIRCd
#<module name="m_httpd.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
# Optional - If you choose to use the m_httpd.so module, then you must
# specify the port number and other details of your http server:
#
#<http ip="192.168.1.10" host="brainwave" port="32006"
# index="/home/brain/inspircd/http/index.html">
#
# You may have as many of these tags as you wish, each with a different
# IP, port, host or index file. Each one will act as an independent
# HTTP server.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# http ACL module: Provides access control lists for m_httpd dependent
# modules. Use this module to restrict pages by IP address and by
# password.
#
#<module name="m_httpd_acl.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
# Restrict access to the m_httpd_stats module to all but the local
# network and when the correct password is specified:
#
# <httpdacl path="/stats*" types="password,whitelist"
# username="secretstuff" password="mypasshere" whitelist="127.0.0.*,10.*">
#
# Deny all connections to all but the main index page:
#
# <httpdacl path="/*" types="blacklist" blacklist="*">
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# http config module: Allows the server's configuration to be viewed
# over HTTP. Requires m_httpd.so to be loaded for it to function.
#<module name="m_httpd_config.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# http stats module: Provides basic stats pages over HTTP
# Requires m_httpd.so to be loaded for it to function.
#<module name="m_httpd_stats.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ident: Provides RFC 1413 ident lookup support
# When this module is loaded <connect:allow> tags may have an optional
# useident="yes|no" boolean value, determining whether or not to lookup
# ident on users matching that connect tag.
#<module name="m_ident.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you are using the m_ident.so module, then you can #
# specify the timeout for ident lookups here. If not defined, it will #
# default to one second. This is a non-blocking timeout which holds #
# the user in a 'connecting' state until the lookup is complete. #
# The bind value indicates which IP to bind outbound requests to. #
# #
#<ident timeout="5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invite except module: Adds support for channel invite exceptions (+I)
#<module name="m_inviteexception.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invisible module - Adds support for usermode +Q (quiet) which lets an
# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that
# opers are still able to see invisible users, and if an oper with +Q
# deopers, they will become visible.
#
# This module is oper-only and seen by many to be quite abusive.
#
#<module name="m_invisible.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Join flood module: Adds support for join flood protection (+j)
#<module name="m_joinflood.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Jump Server module: Adds support for the RPL_REDIR numeric
# This module is oper-only.
# To use, JUMPSERVER must be in one of your oper class blocks.
#<module name="m_jumpserver.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
#<module name="m_kicknorejoin.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Knock module: adds the /KNOCK command and +K channel mode
#<module name="m_knock.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LDAP authentication module: Adds the ability to authenticate users #
# via LDAP. This is an extra module which must be enabled explicitly #
# by symlinking it from modules/extra, and requires the OpenLDAP libs #
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_ldapauth.cpp
# and run make install, then uncomment this module to enable it. #
# #
#<module name="m_ldapauth.so"> #
# #
# Configuration: #
# #
# <ldapauth baserdn="ou=People,dc=brainbox,dc=cc" #
# attribute="uid" #
# server="ldap://brainwave.brainbox.cc" #
# allowpattern="Guest*" #
# killreason="Access denied" #
# searchscope="subtree" #
# binddn="cn=Manager,dc=brainbox,dc=cc" #
# bindauth="mysecretpass" #
# verbose="yes"> #
# #
# The baserdn indicates the base DN to search in for users. Usually #
# this is 'ou=People,dc=yourdomain,dc=yourtld'. #
# #
# The attribute value indicates the attribute which is used to locate #
# a user account by name. On POSIX systems this is usually 'uid'. #
# #
# The server parameter indicates the LDAP server to connect to. The #
# ldap:// style scheme before the hostname proper is MANDITORY. #
# #
# The allowpattern value allows you to specify a wildcard mask which #
# will always be allowed to connect regardless of if they have an #
# account, for example guest users. #
# #
# Killreason indicates the QUIT reason to give to users if they fail #
# to authenticate. #
# #
# The searchscope value indicates the subtree to search under. On our #
# test system this is 'subtree'. Your mileage may vary. #
# #
# Setting the verbose value causes an oper notice to be sent out for #
# every failed authentication to the server, with an error string. #
# #
# The binddn and bindauth indicate the DN to bind to for searching, #
# and the password for the distinguished name. Some LDAP servers will #
# allow anonymous searching in which case these two values do not #
# need defining, otherwise they should be set similar to the examples #
# above. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LDAP oper configuration module: Adds the ability to authenticate #
# opers via LDAP. This is an extra module which must be enabled #
# explicitly by symlinking it from modules/extra, and requires the #
# OpenLDAP libs. Re-run configure with: ./configure --enable-extras=m_ldapoper.cpp
# and run make install, then uncomment this module to enable it. #
# #
#<module name="m_ldapoper.so">
# #
# Configuration: #
# #
# <ldapoper baserdn="ou=People,dc=brainbox,dc=cc"
# server="ldap://brainwave.brainbox.cc"
# searchscope="subtree"
# binddn="cn=Manager,dc=brainbox,dc=cc"
# bindauth="mysecretpass">
# #
# Available configuration items are identical to the same items in #
# m_ldapauth above. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is #
# used to temporarily close/open for new connections to the server. #
# These commands require OPER status and that the LOCKSERV UNLOCKSERV #
# are specified in a <class> tag that the oper is part of. This is so #
# you can control who has access to this possible dangerous command. #
# If your server is locked and you got disconnected, do a REHASH from #
# shell to open up again.
#
# This module is oper-only.
#
#<module name="m_lockserv.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Map hiding module: replaces /MAP and /LINKS output to users with a #
# message to see a website, set by maphide="http://link.to/site" in #
# the security tag, instead. #
#<module name="m_maphide.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Msg flood module: Adds message/notice flood protection (+f)
#<module name="m_messageflood.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MsSQL module: Allows other SQL modules to access MS SQL Server
# through a unified API. You must copy the source for this module
# from the directory src/modules/extra, plus the file m_sqlv2.h
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_mssql.cpp
# and run make install, then uncomment this module to enable it.
#
#<module name="m_mssql.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_mssql.so is more complex than described here, see wiki for more #
# info http://wiki.inspircd.org/Modules/mssql #
#
#<database name="db" username="user" password="pass" hostname="localhost" id="db1">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MySQL module: Allows other SQL modules to access MySQL databases
# through a unified API. You must copy the source for this module
# from the directory src/modules/extra, plus the file m_sqlv2.h
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_mysql.cpp
# and run make install, then uncomment this module to enable it.
#
#<module name="m_mysql.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_mysql.so is more complex than described here, see the wiki for #
# more: http://wiki.inspircd.org/Modules/mysql #
#
#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# NAMESX module: Provides support for the NAMESX extension which allows
# clients to see all the prefixes set on a user without getting confused.
# This is supported by mIRC, x-chat, klient, and maybe more.
#<module name="m_namesx.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# National characters module:
# 1) Allows using national characters in nicknames.
# 2) Allows using custom (national) casemapping over the network.
# file -- filename of existing file in "locales" directory
# casemapping -- custom value for 005 numeric (if you want it to be
# different from the filename.
#
#<nationalchars file="bynets/russian-w1251-charlink" casemapping="ru_RU.cp1251-charlink">
#<module name="m_nationalchars.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nickchange flood protection module: Allows up to X nick changes in Y seconds.
# Provides channel mode +F.
#<module name="m_nickflood.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nicklock module: Let opers change a user's nick and then stop that
# user from changing their nick again.
# This module is oper-only.
# To use, NICKLOCK and NICKUNLOCK must be in one of your oper class blocks.
#<module name="m_nicklock.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No ctcp module: Adds the channel mode +C to block CTCPs and extban C
# to block CTCPs sent by specific users.
#<module name="m_noctcp.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No kicks module: Adds the +Q channel mode and the Q: extban to deny
# certain users from kicking.
#<module name="m_nokicks.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No nicks module: Adds the +N channel mode, as well as the +b N:
# extended bantype. +N stops all users from changing their nick,
# the +b N: extban stops anyone from matching a +b N:nick!user@host
# mask from changing their nick.
#<module name="m_nonicks.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No part message module: adds extban 'p' to block part messages from #
# matching users. #
#<module name="m_nopartmsg.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No Notice module: adds the channel mode +T and the extban T to block
# specific users from noticing the channel.
#<module name="m_nonotice.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Network buisness join module
# Allows an oper to join a channel using /OJOIN, giving them +Y on the
# channel which makes them immune to kick/deop/etc.
#<module name="m_ojoin.so">
#
#<ojoin prefix="!" notice="yes" op="yes">
# Specify the prefix that +Y will grant here
# Leave prefix empty if you do not wish +Y to grant a prefix
# If notice is set to on, upon ojoin, the server will notice
# the channel saying that the oper is joining on network business
# If op is set to on, it will give them +o along with +Y
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper channels mode: Adds the +O channel mode and +beI type O:<mask>
# to ban, exempt, and invex given oper type masks.
# e.g, /mode #channel +iI O:* is equivilant to chmode +O, but you
# may also, e.g. /mode #channel +iI O:AdminTypeOnly to only allow admins.
# +be work in a similar fashion.
#
#<module name="m_operchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper Join module: Auto-joins opers to a channel upon oper-up
# This module is oper-only. For the user equivalent, see m_conn_join.
#<module name="m_operjoin.so">
#
#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# If you are using the m_operjoin.so module, specify options here: #
# #
# channel - The channel name to join, can also be a comma #
# seperated list eg. "#channel1,#channel2". #
# #
# override - Lets the oper join walking thru any modes that #
# might be set, even bans. Use "yes" or "no". #
# #
#<operjoin channel="#channel" override="no">
#
# Alternatively you can use the autojoin="channellist" in a <type> #
# tag to set specific autojoins for a type of oper, for example: #
#
#<type name="Helper" autojoin="#help" classes="...">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper log module: Logs all oper commands to the ircd log at default
# loglevel.
# This module is oper-only.
#<module name="m_operlog.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper prefixing module: Gives IRC operators a prefix status character
# on all channels they are in.
#
#<module name="m_operprefix.so">
#
# You may additionally customise the prefix character.
#<operprefix prefix="!">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper MOTD module: Provides support for seperate message of the day
# on oper-up
# This module is oper-only.
#<module name="m_opermotd.so">
#
#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# If you are using the m_opermotd.so module, specify the motd here #
# #
# onoper - Should the message be sent on /OPER or only when #
# /OPERMOTD is used. Use "yes" or "no". #
# #
#<opermotd file="oper.motd" onoper="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Override module: Adds support for oper override
# This module is oper-only.
#<module name="m_override.so">
#
#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# m_override.so is too complex it describe here, see the wiki: #
# http://wiki.inspircd.org/Modules/override #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper levels module: Gives each oper a level and prevents
# actions being taken against higher level opers
# Specify the level as the 'level' parameter of the <type> tag
# # This module is oper-only.
#<module name="m_operlevels.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper modes module: Allows you to specify modes to add/remove on oper
# Specify the modes as the 'modes' parameter of the <type> tag
# and/or as the 'modes' parameter of the <oper> tag.
# This module is oper-only. For the user equivalent, see m_conn_umodes
#<module name="m_opermodes.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper password hash module: Allows hashed oper passwords
# Relies on the module m_md5.so and/or m_sha256.so being loaded before
# m_password_hash.so in the configuration file.
# This module is oper-only.
#<module name="m_password_hash.so">
#
#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#
# To use this module, you must define a hash type for each oper's
# password you want to hash. For example:
#
# <oper name="Brain"
# host="ident@dialup15.isp.com"
# hash="sha256"
# password="a41d730937a53b79f788c0ab13e9e1d5"
# type="NetAdmin">
#
# The types of hashing available vary depending on which hashing modules
# you load, but usually if you load m_sha256.so and m_md5.so, both md5
# and sha256 type hashing will be available (the most secure of which
# is SHA256).
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Permanent Channels module: Channels with the permanent channels mode
# will remain open even after everyone else has left the channel, and
# therefore keep things like modes, ban lists and topic. Permanent
# channels -may- need support from your Services package to function
# properly with them. This adds channel mode +P.
# This module is oper-only.
#<module name="m_permchannels.so">
#
# If you like, m_permchannels can write a config file of permanent channels
# whenever +P is set, unset, or the topic/modes on a +P channel is changed.
# If you want to do this, set the filename below, and uncomment the include.
#
# The conf file generated has a path relative to the inspircd binary, hence '../conf/'.
#
#<permchanneldb filename="../conf/permchannels.conf">
#<include file="permchannels.conf">
#
# You may also create channels on startup by using the <permchannels> block.
#<permchannels channel="#opers" modes="is" topic="Opers only.">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# PostgreSQL module: Allows other SQL modules to access PgSQL databases
# through a unified API. You must copy the source for this module
# from the directory src/modules/extra, plus the file m_sqlv2.h
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_pgsql.cpp
# and run make install, then uncomment this module to enable it.
#
#<module name="m_pgsql.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_pgsql.so is more complex than described here, see the wiki for #
# more: http://wiki.inspircd.org/Modules/pgsql #
#
#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Muteban: Implements extended ban m:, which stops anyone matching
# a mask like +b m:nick!user@host from speaking on channel.
#<module name="m_muteban.so">
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Random Quote module: provides a random quote on connect.
# NOTE: Some of these may mimic fatal errors and confuse users and
# opers alike! - BEWARE!
#<module name="m_randquote.so">
#
#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_randquote.so module, then #
# specify below the path to the randquotes.conf file. #
# #
#<randquote file="randquotes.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Redirect module: Adds channel redirection (mode +L)
#<module name="m_redirect.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular Expression Provider for Glob or wildcard (?/*) matching.
# You must have at least 1 provider loaded to use m_filter or m_rline
# modules. This module has no additional requirements, as it uses the
# matching already present in InspIRCd core.
#<module name="m_regex_glob.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular Expression Provider for PCRE (Perl-Compatible Regular
# Expressions). You need libpcre installed to compile and load this
# module. You must have at least 1 provider loaded to use m_filter or
# m_rline.
#<module name="m_regex_pcre.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular Expression Provider for POSIX Regular Expressions.
# You shouldn't need any additional libraries on a POSIX-compatible
# system (ie: any Linux, BSD, but not Windows). You must have at least
# 1 provider loaded to use m_filter or m_rline.
# On POSIX-compliant systems, regex syntax can be found by using the
# command: 'man 7 regex'.
#<module name="m_regex_posix.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular Expression Provider for TRE Regular Expressions.
# This is the same regular expression engine used by UnrealIRCd, so
# if you are most familiar with the syntax of /spamfilter from there,
# this is the provider you want. You need libtre installed in order
# to compile and load this module.
#<module name="m_regex_tre.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Registered users only channel creation
# Allows only registered users and opers to create new channels.
#
# You probably *DO NOT* want to load this module on a public network.
#
#<module name="m_regonlycreate.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remove module: Adds the /REMOVE command which is a peaceful
# alternative to /KICK
#<module name="m_remove.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restricted channels module: Allows only opers to create channels.
#
# You probably *DO NOT* want to load this module on a public network.
#
#<module name="m_restrictchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restrict message module: Allows users to only message opers.
#
# You probably *DO NOT* want to load this module on a public network.
#
#<module name="m_restrictmsg.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ban users through regular expression patterns
#<module name="m_rline.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
#
# If you wish to re-check a user when they change nickname (can be
# useful under some situations, but *can* also use CPU with more users
# on a server) then set the following configuration value:
# Also, this is where you set what Regular Expression engine is to be
# used. If you ever change it while running, all of your R-Lines will be
# wiped. This is the regex engine used by all R-Lines set, and
# m_regex_<engine>.so must be loaded, or rline will be nonfunctional
# until you load it or change the engine to one that is loaded.
#
#<rline matchonnickchange="yes" engine="pcre">
#
# Generally, you will NOT want to use 'glob' here, as this turns
# rline into just another gline. The exceptions are that rline will
# always use the full nick!user@host realname string, rather than only
# user@host, but beware that only the ? and * wildcards are available,
# and are the only way to specify where the space can occur if you do
# use glob. For this reason, is recommended to use a real regex engine
# so that at least \s or [[:space:]] is available.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# JSON-RPC module: Encode and decode JSON-RPC requests for modules
#<module name="m_rpc_json.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# RPC test module: A test of the RPC API
#<module name="m_rpctest.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAJOIN module: Adds the /SAJOIN command
# This module is oper-only.
# To use, SAJOIN must be in one of your oper class blocks.
#<module name="m_sajoin.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAKICK module: Adds the /SAKICK command
# This module is oper-only.
# To use, SAKICK must be in one of your oper class blocks.
#<module name="m_sakick.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAMODE module: Adds the oper /SAMODE command
# This module is oper-only.
# To use, SAMODE must be in one of your oper class blocks.
#<module name="m_samode.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SANICK module: Allows opers to change user's nicks
# This module is oper-only.
# To use, SANICK must be in one of your oper class blocks.
#<module name="m_sanick.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAPART module: Adds the oper /SAPART command
# This module is oper-only.
# To use, SAPART must be in one of your oper class blocks.
#<module name="m_sapart.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
# This module is oper-only.
# To use, SAQUIT must be in one of your oper class blocks.
#<module name="m_saquit.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SATOPIC module: Adds the oper /SATOPIC command
# This module is oper-only.
# To use, SATOPIC must be in one of your oper class blocks.
#<module name="m_satopic.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SASL authentication module: Provides support for IRC Authentication
# Layer (aka: atheme SASL) via AUTHENTICATE.
#<module name="m_sasl.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Secure list module: Prevent /LIST in the first minute of connection,
# crippling most spambots and trojan spreader bots.
#<module name="m_securelist.so">
#
#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Securelist can be harmful to some irc search engines such as #
# netsplit.de and searchirc.com. To prevent securelist blocking these #
# sites from listing, define exception tags as shown below: #
<securehost exception="*@*.searchirc.org">
<securehost exception="*@*.netsplit.de">
<securehost exception="*@echo940.server4you.de">
# #
# Define the following variable to change how long a user must wait #
# before issuing a LIST. If not defined, defaults to 60 seconds. #
# #
#<securelist waittime="60"> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Servprotect module: Provides support for Austhex style +k /
# UnrealIRCD +S services mode
#<module name="m_servprotect.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# See nicks module: Allow for SNOMASK +N which shows nick changes.
# This module is oper-only.
#<module name="m_seenicks.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Set Idle module: Adds a command for opers to change their
# idle time (mainly a toy)
# This module is oper-only.
# To use, SETIDLE must be in one of your oper class blocks.
#<module name="m_setidle.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Services support module: Adds several usermodes such as +R and +M
# this module implements the 'identified' state via account names (AC)
# and is similar in operation to the way asuka and ircu handle services.
#
# At the same time, this offers +r for users and channels to mark them
# as identified seperately from the idea of a master account, which
# can be useful for services which are heavily nick-as-account centric.
#
# This replaces m_services from 1.1 and earlier.
#
# Also of note is that this module implements two extbans:
# +b R: (stop matching account names from joining)
# +b M: (stop matching account names from speaking)
#
#<module name="m_services_account.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Sethost module: Adds the /SETHOST command
# This module is oper-only.
# To use, SETHOST must be in one of your oper class blocks.
# See m_chghost for how to customise valid chars for hostnames
#<module name="m_sethost.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Setident module: Adds the /SETIDENT command
# This module is oper-only.
# To use, SETIDENT must be in one of your oper class blocks.
#<module name="m_setident.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SETNAME module: Adds the /SETNAME command
# This module is oper-only.
# To use, SETNAME must be in one of your oper class blocks.
#<module name="m_setname.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Serverban: Implements extended ban s:, which stops anyone connected
# to a server matching a mask like +b s:server.mask.here from joining.
#<module name="m_serverban.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Show Whois module: Adds the +W usermode which allows opers
# to see when they are whois'ed (can be annoying).
# This module is oper-only.
#<module name="m_showwhois.so">
#
# If you wish, you may also let users set this mode. Only opers with the
# users/auspex priv will see real hosts of people, though. This setting
# is not reloadable via /rehash, and will require /reloadmodule, as
# it directly affects the mode object itself.
#<showwhois opersonly="yes"
#
# You may also set whether or not users should recieve whois notices, should
# they be /whois'd by an oper.
# showfromopers="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Shun module: Provides the /shun command, which stops a user executing
# most commands.
# This module is oper-only.
# To use, SHUN must be in one of your oper class blocks.
#<module name="m_shun.so">
#
# You may also configure which commands you wish a user to be able to
# perform. It should be noted that if a shunned user issues QUIT or PART
# then their message will be removed, as if they did not issue one.
#
# You can (optionally) let the user know that their command was blocked.
#
# You may also let SHUN affect opers (defaults to no).
#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Spy module: Provides the ability to see the complete names list of
# channels an oper is not a member of
# This module is oper-only.
#<module name="m_spy.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL channel mode module: Adds support for SSL-only channels (+z).
# does not do anything useful without a working SSL module (see below)
#<module name="m_sslmodes.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
# if enabled. You must copy the source for this module from the directory
# src/modules/extra, or answer 'yes' in ./configure when asked if you
# want to enable this, or it will not load.
#<module name="m_ssl_gnutls.so">
#
#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_ssl_gnutls.so is too complex it describe here, see the wiki: #
# http://wiki.inspircd.org/Modules/ssl_gnutls #
# #
# NOTE: If you want to use this module to encrypt and sign your #
# server to server traffic, you MUST load it before m_spanningtree in #
# your configuration file! #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL Info module: Allows users to retrieve information about other
# user's peer SSL certificates and keys. This can be used by client
# scripts to validate users. For this to work, one of m_ssl_gnutls.so
# or m_ssl_openssl.so must be loaded. This module also adds the
# "* <user> is using a secure connection" whois line, the ability for
# opers to use SSL fingerprints to verify their identity and the ability
# to force opers to use SSL connections in order to oper up.
# It is highly recommended to load this module especially if
# you use SSL on your network.
# For how to use the oper features, please see the first example <oper> tag
# in opers.conf.example.
#
#<module name="m_sslinfo.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
# if enabled. You must copy the source for this module from the directory
# src/modules/extra, or answer 'yes' in ./configure when asked if you
# want to enable this, or it will not load.
#<module name="m_ssl_openssl.so">
#
#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_ssl_openssl.so is too complex it describe here, see the wiki: #
# http://wiki.inspircd.org/Modules/ssl_openssl #
# #
# NOTE: If you want to use this module to encrypt and sign your #
# server to server traffic, you MUST load it before m_spanningtree in #
# your configuration file! #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Strip colour module: Adds the channel mode +S
#<module name="m_stripcolor.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SILENCE module: Adds support for /SILENCE
#<module name="m_silence.so">
#
# Configuration tags:
#
#<silence maxentries="32">
#
# Sets the maximum number of entries on a users silence list.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQLite3 module: Allows other SQL modules to access SQLite3 #
# databases through a unified API. You must link the source for this #
# module from the directory src/modules/extra to src/modules, plus #
# the file m_sqlv2.h #
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_aqlite.cpp
# and run make install, then uncomment this module to enable it. #
#
#<module name="m_sqlite3.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_sqlite.so is more complex than described here, see the wiki for #
# more: http://wiki.inspircd.org/Modules/sqlite3 #
#
#<database hostname="/full/path/to/database.db" id="anytext">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQLutils module: Provides some utilities to SQL client modules, such
# as mapping queries to users and channels. You must copy the source
# for this module from the directory src/modules/extra/m_sqlutils.cpp
# and src/modules/extra/m_sqlutils.h into /src/modules
# Needed for, and loaded before: SQLauth and SQLoper
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqlutils.cpp
# and run make install, then uncomment this module to enable it.
#
#<module name="m_sqlutils.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL authentication module: Allows IRCd connections to be tied into
# a database table (for example a forum). You must copy the source for
# this module from the directory src/modules/extra
# Depends on the SQLutils module being loaded first.
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqlauth.cpp
# and run make install, then uncomment this module to enable it.
#
#<module name="m_sqlauth.so">
#
#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_sqlauth.so is too complex it describe here, see the wiki: #
# http://wiki.inspircd.org/Modules/sqlauth #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL logging module: Allows you to log network-wide data for your
# network in a fully normalised set of SQL tables. You must copy the
# source for this module from the directory src/modules/extra
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqllog.cpp
# and run make install, then uncomment this module to enable it.
#
#<module name="m_sqllog.so">
#
#-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# dbid - Database ID to use (see m_sql) #
# #
# See also: http://wiki.inspircd.org/Modules/sqllog #
# #
#<sqllog dbid="1">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL oper module: Allows you to store oper credentials in an SQL table
# You must copy the source for this module from the directory src/modules/extra
# Depends on the SQLutils module being loaded first.
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqloper.cpp
# and run make install, then uncomment this module to enable it.
#
#<module name="m_sqloper.so">
#
#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# dbid - Database ID to use (see m_sql) #
# hash - Hashing provider to use for password hashing #
# #
# See also: http://wiki.inspircd.org/Modules/sqloper #
# #
#<sqloper dbid="1" hash="md5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be #
# added/removed by Services. #
#<module name="m_svshold.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SWHOIS module: Allows you to add arbitary lines to user WHOIS.
# This module is oper-only.
# To use, SWHOIS must be in one of your oper class blocks.
#<module name="m_swhois.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Test module: enable this to create a command useful in testing
# flood control. To avoid accidental use on live networks, the server
# name must contain ".test" to load the module
#<module name="m_testnet.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Timed bans module: Adds timed channel bans and the /TBAN command
#<module name="m_timedbans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Test line module: Adds the /TLINE command, used to test how many
# users a /GLINE or /ZLINE etc would match.
# This module is oper-only.
# To use, TLINE must be in one of your oper class blocks.
#<module name="m_tline.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# UHNAMES support module: Adds support for the IRCX style UHNAMES
# extension, which displays ident and hostname in the names list for
# each user, saving clients from doing a WHO on the channel. Note that
# this module is not widely supported yet. If a client does not support
# UHNAMES it will not enable it, this will not break incompatible
# clients.
#<module name="m_uhnames.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Uninvite module: Adds the /UNINVITE command which lets users remove
# pending invites from channels without waiting for the user to join.
#<module name="m_uninvite.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Userip module: Adds the /USERIP command
# This module is oper-only.
# To use, USERIP must be in one of your oper class blocks.
#<module name="m_userip.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Vhost module: Adds the VHOST command which allows for adding virtual
# hosts which are accessible using a username and password in the config.
#<module name="m_vhost.so">
#
#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# user - Username for the vhost. #
# #
# pass - Password for the vhost. #
# #
# hash - The hash for the specific user (optional)
# m_password_hash.so and a hashing module must be loaded for this to work
# #
# host - Vhost to set. #
#
#<vhost user="some_username" pass="some_password" host="some.host">
#<vhost user="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" host="some.other.host">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Watch module: Adds the WATCH command, which is used by clients to
# maintain notify lists.
#<module name="m_watch.so">
#
# Configuration tags:
#
#<watch maxentries="32">
#
# Sets the maximum number of entries on a user's watch list.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
# in a file "xline.db" which can be re-loaded on restart. This is useful
# for two reasons: it keeps bans so users may not evade them, and on
# bigger networks, server connections will take less time as there will
# be a lot less bans to apply - as most of them will already be there.
#<module name="m_xline_db.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# ZipLinks module: Adds support for zlib deflate on server to server
# connections. Both ends of the connection must load this module.
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_ziplink.cpp
# and run make install, then uncomment this module to enable it.
#
#<module name="m_ziplink.so">
#
# To use this module, you must enable it as a ssl type in your
# <link> tags or <bind> tags using the ssl name 'ziplinks'.
# See the documentation of <link> and <bind>, respectively.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# To link servers to InspIRCd, you MUST load the m_spanningtree #
# module. Since several features (like SSL server links) rely on #
# other modules being loaded before m_spanningtree, the module itself #
# is at the bottom of this file. DO NOT forget to load it. If you DO #
# NOT do this, server links will NOT work at all. ie. The ports will #
# NOT bind, and /connect will not work properly. This is by design, #
# to allow for the implementation of other linking protocols in #
# modules in the future. #
# #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Spanning Tree module - allows linking of servers using the spanning
# tree protocol (see the READ THIS BIT section above).
# You will almost always want to load this.
#
#<module name="m_spanningtree.so">
Reference in New Issue View Git Blame Copy Permalink