ouch/inspircd
2
0
Fork 0
mirror of https://github.com/inspircd/inspircd.git synced 2025-03-10 02:59:01 -04:00
Code Issues Packages Projects Releases Wiki Activity
inspircd/docs/inspircd.conf.example
brain 550c076c9a Added leachim's +qa prefix patch 
git-svn-id: http://svn.inspircd.org/repository/trunk/inspircd@5016 e03df62e-2008-0410-955e-edbf42e46eb7
2006-08-25 12:04:32 +00:00

1373 lines
74 KiB
Plaintext
Raw Blame History

########################################################################
# #
# ___ ___ ____ ____ _ #
# |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | #
# | || '_ \/ __| '_ \| || |_) | | / _` | #
# | || | | \__ \ |_) | || _ <| |__| (_| | #
# |___|_| |_|___/ .__/___|_| \_\\____\__,_| #
# |_| #
# ____ __ _ _ _ #
# / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ #
# | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ #
# | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | #
# \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| #
# |___/ #
# #
##################################||####################################
#||#
##################################||####################################
# #
# This is an example of the config file for InspIRCd. #
# Change the options to suit your network #
# #
# Last updated on : 09/01/2006 #
# Written by : CC (cc@backchat.co.za) #
# Updated by : katsklaw (katsklaw@gmail.com) #
# Updated by : brain (brain@inspircd.org) #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT #
# lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even #
# if you've configured InspIRCd before, these probably indicate #
# something new or different to this version and you SHOULD READ IT. #
# #
########################################################################
# #
# Unalphabeticalise the modules list at your own risk #
# #
########################################################################
#-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
# #
# Here is where you enter the information about your server. #
# #
# Syntax is as follows: #
# #
# <server name="server.name" #
# description="Server Description" #
# network="MyNetwork"> #
# #
<server name="penguin.omega.org.za"
description="Waddle World"
network="Omega">
#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Describes the Server Administrator's real name, nick #
# and email address. #
# #
# Syntax is as follows: #
# <admin name="real name" #
# nick="nick name" #
# email="email@address.com"> #
# #
<admin name="Johnny English"
nick="MI5"
email="MI5@the.best.secret.agent">
#-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
# #
# Enter the port and address bindings here. #
# #
# bind address - specifies which the address which ports bind. #
# may be a hostname or an IP address. Resolution of #
# hostnames may block for up to one second per IP #
# as port binding occurs before the socket engine is #
# initialized and therefore nonblocking DNS is not #
# available at this point until startup is complete. #
# port - The port number to bind to #
# type - can be 'clients' or 'servers'. The clients type is #
# a standard tcp based socket, the servers type is a #
# also a TCP based connection but of a different #
# format. #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# If you want to link servers to InspIRCd you must load the #
# m_spanningtree module! Please see the modules list below for #
# information on how to load this module! If you do not load this #
# module, server ports will NOT be bound! #
# #
# Leaving address empty binds to all available interfaces #
# #
# Syntax is as follows: #
# #
# <bind address="ip or host" port="port" type="clients"> #
# <bind address="ip or host" port="port" type="servers"> #
# #
# If InspIRCd is built for IPV6, and you wish to accept IPV4 clients, #
# then you must specify your IPV6 clients in the following form: #
# ::ffff:1.2.3.4, where 1.2.3.4 is the IPV4 address to bind the #
# port on. If InspIRCd is built for IPV4 connections (this is the #
# default) then you do not need to prefix your addresses like this. #
# #
<bind address="" port="6660" type="clients">
<bind address="" port="7000" type="servers">
<bind address="" port="7001" type="servers">
#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
# #
# You can configure the passwords here which you wish to use for #
# the die and restart commands. Only trusted ircops who will #
# need this ability should know the die and restart password. #
# #
# Syntax is as follows: #
# <power diepass="die password" restartpass="restart password" #
# pause="secs before dying"> #
# #
<power diepass="diepass" restartpass="restartpass" pause="2">
#-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# This optional tag allows you to include another config file #
# allowing you to keep your configuration tidy. The configuration #
# file you include will be treated as part of the configuration file #
# which includes it, in simple terms the inclusion is transparent. #
# #
# All paths to config files are relative to the directory of the main #
# config file inspircd.conf, unless the filename starts with a forward#
# slash (/) in which case it is treated as an absolute path. #
# #
# Syntax is as follows: #
# <include file="file.conf"> #
# #
#-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# This is where you can configure which connections are allowed #
# and denied access onto your server. #
# The password is optional. #
# You may have as many of these as you require. #
# To allow/deny all connections use a * #
# #
# Syntax is as follows: #
# #
# <connect allow="ip mask"> #
# <connect allow="ip mask" password="blahblah"> #
# <connect allow="ip mask" password="blah" timeout="10"> #
# <connect allow="ip mask" timeout="blah" flood="5"> #
# <connect allow="ip mask" threshold="8" pingfreq="120"> #
# <connect allow="ip mask" sendq="99999" revcq="696969"> #
# <connect allow="ip mask" localmax="3" globalmax="3"> #
# <connect deny="ip mask"> #
# #
# IP masks may be specified in CIDR format for IPV4 and IPV6. #
# #
# You may optionally include timeout="x" on any allow line, which #
# specifies the amount of time given before an unknown connection #
# is closed if USER/NICK/PASS are not given. This value is in secs #
# #
# You should also include a flood="x" line which indicates #
# the number of lines a user may place into their buffer at once #
# before they are disconnected for excess flood. This feature can #
# not be disabled, however it can be set to exremely high values, #
# rendering it effectively disabled. A recommended value is 10. #
# A counter is maintained for each user which is reset every #
# 'threshold' seconds and specifying this threshold value with #
# threshold="X" indicates how often the counter is reset. For #
# example, with flood="5" and threshold="8", the user may not send #
# more than 5 lines in 8 secs. #
# #
# You may optionally specify the sendq size and ping frequency of #
# each connect:allow line using the pingfreq="X" and sendq="X" #
# settings as shown in the full example below. #
# The ping frequency is specified in seconds, and the sendq size #
# in bytes. It is recommended, although not enforced, that you #
# should never set your sendq size to less than 8k. Send Queues are #
# dynamically allocated and can grow as needed up to the maximum #
# size specified. #
# #
# The optional recvq value is the maximum size which users in this #
# group may grow their receive queue to. This is recommended to be #
# kept pretty low compared to the sendq, as users will always #
# recieve more than they send in normal circumstances. The default #
# if not specified is 4096. #
# #
# IMPORTANT NOTE, CALL THE CONFUSION POLICE! #
# The sendq is the data waiting to be sent TO THE USER. #
# The recvq is the data being received FROM THE USER. #
# The names sendq and recvq are from the SERVER'S PERSPECTIVE not #
# that of the user... Just to clear up any confusion or complaints #
# that these are backwards :p #
# #
# The localmax and globalmax values can be used to enforce local #
# and global session limits on connections. The session limits are #
# counted against all users, but applied only to users within the #
# class. For example, if you had a class 'A' which has a session #
# limit of 3, and a class 'B' which has a session limit of 5, and #
# somehow, two users managed to get into class B which also match #
# class A, there is only one connection left for this IP now in A, #
# but if they can connect again to B, there are three. You get the #
# idea (i hope). #
# #
<connect allow="196.12.*" password="secret">
<connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096" localmax="3" globalmax="3">
<connect deny="69.254.*">
<connect deny="3ffe::0/32">
#-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
# #
# Classes are a group of commands which are grouped together #
# and given a unique name. They used to define which commands #
# are available to certain types of Operators. #
# #
# Syntax is as follows: #
# #
# <class name="name" commands="oper commands"> #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# You are not forced to give these classes the names given below. #
# You can create your own named classes, if you want, in fact that #
# is the whole idea of this system! #
# #
<class name="Shutdown" commands="DIE RESTART REHASH">
<class name="ServerLink" commands="CONNECT SQUIT">
<class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE ELINE">
<class name="OperChat" commands="WALLOPS GLOBOPS">
<class name="HostCloak" commands="SETHOST SETIDENT SETNAME">
#-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-#
# #
# This is where you specify which types of operators you have on #
# your server, as well as the commands they are allowed to use. #
# This works alongside with the classes specified above. #
# #
# type name - a name for the combined class types #
# a type name cannot contain spaces, however if you #
# put an _ symbol in the name, it will be translated #
# to a space when displayed in a WHOIS. #
# #
# classes - specified above, used for flexibility for the #
# server admin to decide on which operators get #
# what commands #
# #
# host - optional hostmask operators will recieve on oper-up. #
# #
# Syntax is as follows: #
# #
# <type name="name" classes="class name" host="oper hostmask"> #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# You are not forced to give these types the names given below. #
# You can create your own named types, if you want, in fact that #
# is the whole idea of this system! #
# #
<type name="NetAdmin" classes="OperChat BanControl HostCloak Shutdown ServerLink" host="netadmin.omega.org.za">
<type name="GlobalOp" classes="OperChat BanControl HostCloak ServerLink" host="ircop.omega.org.za">
<type name="Helper" classes="HostCloak" host="helper.omega.org.za">
#-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Opers are defined here. This is a very important section. #
# Remember to only make operators out of truthworthy people. #
# #
# name - oper name, best to use lower-case #
# #
# password - password to oper-up, #
# encryption not supported by inspircd. However, there #
# are modules that allow for oper password encryption. #
# #
# host - host of client allowed to oper-up. #
# wildcards accepted, seperate multiple hosts with space #
# You may also specify CIDR ip addresses. #
# #
# type - specified above, defines the kind of operator #
# #
# Syntax is as follows: #
# <oper name="login" #
# password="pass" #
# host="hostmask@of.oper" #
# type="oper type"> #
# #
<oper name="katsklaw"
password="s3cret"
host="ident@dialup15.isp.com *@localhost *@server.com *@3ffe::0/16"
type="NetAdmin">
#-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# Defines which servers can link to this one, and which servers this #
# server may create outbound links to. #
# #
# name - The name is the canocial name of the server, does #
# not have to resolve - but it is expected to be sent #
# in the remote servers connection info. #
# ipaddr - Valid host or ip address for remote server. * #
# #
# port - The TCP port for the remote server. #
# #
# sendpass - Password to send to create an outbound connection #
# to this server. #
# #
# recvpass - Password to receive to accept an inbound connection #
# from this server. #
# #
# autoconnect - Sets the server to autoconnect. Where x is the num. #
# (optional) of seconds between attempts. e.g. 300 = 5 minutes. #
# #
# encryptionkey - Encryption key to be used for AES encryption, where #
# supported. Links using the spanning tree protocol #
# support AES. The encryption key must be EXACTLY 8, #
# 16 or 32 characters in length for a 64, 128 or 256 #
# bit key, respectively. #
# #
# hidden - When using m_spanningtree.so for linking. you may #
# set this to 'yes', and if you do, the IP address/ #
# hostname of this connection will NEVER be shown to #
# any opers on the network. In /STATS c its address #
# will show as *@<hidden>, and during CONNECT and #
# inbound connections, its IP will show as <hidden> #
# UNLESS the connection fails (e.g. due to a bad #
# password or servername) #
# #
# allowmask - When this is defined, it indicates a range of IP #
# addresses to allow for this link (in CIDR form). #
# e.g. if your server is going to connect to you from #
# the range 1.2.3.1 through 1.2.3.255, put 1.2.3.0/24 #
# into this value. If it is not defined, then only #
# the ipaddr field of the server shall be allowed. #
# #
# to u:line a server (give it extra privilages required for running #
# services, Q, etc) you must include the <uline server> tag as shown #
# in the example below. You can have as many of these as you like. #
# #
# WARNING: Unlike other ircds, u:lining a server allows ALL users on #
# that server to operoverride modes. This should only be used for #
# services and protected oper servers! #
# #
# NOTE: If you have built InspIRCd with IPV6 support, and you want #
# to link to an IPV4 server, you must specify the IP address in the #
# form '::ffff:1.2.3.4' where 1.2.3.4 is the IP address of the target #
# server. If you have built InspIRCd for IPV4 (this is the default) #
# you should not prefix your IP addresses in this fashion. #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# If you want to link servers to InspIRCd you must load the #
# m_spanningtree module! Please see the modules list below for #
# information on how to load this module! If you do not load this #
# module, server links will NOT work! #
# #
<link name="hub.penguin.org"
ipaddr="penguin.box.com"
port="7000"
allowmask="69.58.44.0/24"
autoconnect="300"
sendpass="outgoing!password"
recvpass="incoming!password">
<link name="services.antarctic.com"
ipaddr="localhost"
port="7000"
allowmask="127.0.0.0/8"
sendpass="penguins"
recvpass="polarbears">
<uline server="services.antarctic.com">
#-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# These options let you define the path to your motd and rules #
# files. #
# #
<files motd="/home/cc/inspircd/conf/inspircd.motd"
rules="/home/cc/inspircd/conf/inspircd.rules">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Define your DNS server address here. InspIRCd has its own resolver. #
# If you do not define this value, the first dns server from your #
# /etc/resolv.conf file is read. If no entries are found in this file #
# or the file cannot be opened, the default value '127.0.0.1' is used #
# instead. The timeout value is in seconds. #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# When choosing a server, be sure to choose one which will do a #
# RECURSIVE LOOKUP. InspIRCd's resolver does not currently do these #
# recursive lookups itself, to save time and resources. The dns #
# server recommended by the InspIRCd team is bind, available from the #
# ISC website. If your DNS server does not do a recursive lookup, you #
# will be able to notice this by the fact that none of your users are #
# resolving even though the DNS server appears to be up! Most ISP and #
# hosting provider DNS servers support recursive lookups. #
# #
# NOTE: If you have built InspIRCd with IPV6 support, and you want #
# to use an IPV4 nameserver, you must specify the IP address in the #
# form '::ffff:1.2.3.4' where 1.2.3.4 is the IP address of the target #
# server. If you have built InspIRCd for IPV4 (this is the default) #
# you should not prefix your IP addresses in this fashion. #
# #
# IF YOUR RESOLV.CONF CONTAINS ONLY IPV4 ADDRESSES, AND YOU ARE USING #
# IPV6, YOU MUST DEFINE THE <DNS SERVER> TAG, AND USE THE ::FFFF #
# PREFIX NOTATION. IF YOU DO NOT, HOSTS WILL *NOT* RESOLVE. #
# #
<dns server="127.0.0.1" timeout="5">
# An example of using IPV4 nameservers over IPV6
#<dns server="::ffff:127.0.0.1" timeout="5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Define the path to the PID file here. The PID file can be used to #
# rehash the ircd from the shell or to terminate the ircd from the #
# shell using shell scripts, perl scripts etc, and to monitor the #
# ircd's state via cron jobs. #
# #
<pid file="/path/to/inspircd.pid">
#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Use these tags to customise the ban limits on a per channel basis. #
# the tags are read from top to bottom, and any tag found which #
# matches the channels name applies the banlimit to that channel. #
# It is advisable to put an entry with the channel as '*' at the #
# bottom of the list. If none are specified or no maxbans tag is #
# matched, the banlist size defaults to 64 entries. #
# #
<banlist chan="#morons" limit="128">
<banlist chan="*" limit="69">
#-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# This tag is optional, and specifies one or more commands which are #
# not available to non-operators. For example you may wish to disable #
# NICK and prevent non-opers from changing their nicknames. #
# Note that any disabled commands take effect only after the user has #
# 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
# so for example disabling NICK will not cripple your network. #
# #
#<disabled commands="TOPIC MODE">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Just remove this... Its here to make you read ALL of the config #
# file options ;) #
<die value="You should probably edit your config *PROPERLY* and try again.">
#-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Settings to define which features are useable on your server. #
# #
# prefixquit - a prefix for a client's quit message #
# #
# loglevel - specifies what detail of messages to log in the #
# log file. You may select from debug, verbose, #
# default, sparse and none. #
# #
# allowhalfop - allows the +h channel mode #
# #
# noservices - If noservices is true, yes, or 1, then the first #
# user into a channel gets founder status. This is #
# only useful on networks running the m_chanprotect #
# module without services. #
# #
# qaprefixes - If qaprefixes is true, yes, or 1, then users #
# with +q or +a will get the ~ or & prefixes #
# used in unreal. This is only useful on networks #
# running the m_chanprotect module #
# #
# netbuffersize - size of the buffer used to receive data from #
# clients. The ircd may only read() this amount #
# of text in one go at any time. (OPTIONAL) #
# #
# maxwho - The maximum number of results returned by a /WHO #
# query. This is to prevent /WHO being used as a #
# spam vector or means of flooding an ircd. The #
# default is 128, it is not recommended to raise it #
# above 1024. Values up to 65535 are permitted. #
# #
# somaxconn - The maximum number of sockets that may be waiting #
# in the accept queue. This usually allows the ircd #
# to soak up more connections in a shorter space of #
# time when increased but please be aware there is a #
# system defined maximum value to this, the same way #
# there is a system defined maximum number of file #
# descriptors. Some systems may only allow this to #
# be up to 5 (ugh) while others such as FreeBSD will #
# default to a much nicer 128. #
# #
# moduledir - This optional value indicates a runtime change of #
# the location where modules are to be found. This #
# does not add a supplementary directory. There can #
# only be one module path. #
# #
# softlimit - This optional feature allows a defined softlimit. #
# if defined sets a soft maxconnections value, has #
# to be less than the ./configure maxclients #
# #
# operonlystats - The operonlystats field is optional and specifies #
# which stats characters in /STATS may only be #
# requested by an IRC operator. Stats characters in #
# this field are case sensitive and enforced as #
# oper-only independent of if they are in a module #
# or the core. #
# #
# operspywhois - If this is set then when an IRC operator uses #
# /WHOIS on a user they will see all channels, even #
# ones if channels are secret (+s), private (+p) or #
# if the target user is invisible +i. #
# #
# customversion - If you specify this configuration item, and it is #
# not set to an empty value, then when a user does #
# a /VERSION command on the ircd, this string will #
# be displayed as the second portion of the output, #
# replacing the system 'uname', compile flags and #
# socket engine/dns engine names. You may use this #
# to enhance security, or simply for vanity. #
# #
# maxtargets - The maxtargets field is optional, and if not #
# defined, defaults to 20. It indicates the maximum #
# number of targets which may be given to commands #
# such as PRIVMSG, KICK etc. #
# #
# hidesplits - When set to 'yes', will hide split server names #
# from non-opers. Non-opers will see '*.net *.split' #
# instead of the server names in the quit message, #
# identical to the way IRCu displays them. #
# #
# hidebans - When set to 'yes', will hide gline, kline, zline #
# and qline quit messages from non-opers. For #
# example, user A who is not an oper will just see #
# (G-Lined) while user B who is an oper will see the #
# text (G-Lined: Reason here) instead. #
# #
# hidewhois - When defined with a non-empty value, the given #
# text will be used in place of the user's server #
# in WHOIS, when a user is WHOISed by a non-oper. #
# For example, most nets will want to set this to #
# something like '*.netname.net' to conceal the #
# actual server the user is on. #
# #
# flatlinks - When you are using m_spanningtree.so, and this #
# value is set to true, yes or 1, /MAP and /LINKS #
# will be flattened when shown to a non-oper. #
# #
# hideulines - When you are using m_spanningtree.so, and this #
# value is set to true, yes or 1, then U-lined #
# servers will be hidden in /LINKS and /MAP. For non #
# opers. Please be aware that this will also hide #
# any leaf servers of a U-lined server, e.g. jupes. #
# #
# tempdir - If defined, indicates a path where modules will be #
# temporarily copied before loading. If not defined, #
# defaults to /tmp. #
# #
# nouserdns - If set to 'yes', 'true' or '1', no user dns #
# lookups will be performed for connecting users. #
# this can save a lot of resources on very busy irc #
# servers. #
# #
# syntaxhints - If set to 'yes', 'true' or '1', when a user does #
# not give enough parameters for a command, a syntax #
# hint will be given (using the RPL_TEXT numeric) #
# as well as the standard ERR_NEEDMOREPARAMS. #
# #
<options prefixquit="Quit: "
loglevel="default"
netbuffersize="10240"
maxwho="128"
noservices="0"
qaprefixes="0"
somaxconn="128"
softlimit="128"
operonlystats="oclgkz"
operspywhois="no"
customversion=""
maxtargets="20"
hidesplits="no"
hidebans="no"
hidewhois=""
flatlinks="no"
hideulines="no"
nouserdns="no"
syntaxhints="no"
allowhalfop="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# These tags define which modules will be loaded on startup by your #
# server. Add modules without any paths. When you make your ircd #
# using the 'make' command, all compiled modules will be moved into #
# the folder you specified when you ran ./configure. The module tag #
# automatically looks for modules in this location. #
# If you attempt to load a module outside of this location, either #
# in the config, or via /LOADMODULE, you will receive an error. #
# #
# By default, ALL modules are commented out. You must uncomment them #
# or add lines to your config to load modules. Please refer to #
# http://www.inspircd.org/wiki/Modules_List for a list of modules and#
# each modules link for any additional conf tags they require. #
# #
# WINDOWS USERS PLEASE NOTE: You can still load these modules! They #
# are incorporated into the executable and can be loaded and removed #
# similarly to if they were in a ramdisk. #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# To link servers to InspIRCd, you MUST load the m_spanningtree #
# module, as shown below. If you DO NOT do this, server links will #
# NOT work at all. ie. The ports will NOT bind, and /connect will not #
# work properly. This is by design, to allow for the implementation #
# of other linking protocols in modules in the future. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Spanning Tree module - allows linking of servers using the spanning
# tree protocol (see the READ THIS BIT section above).
#
#<module name="m_spanningtree.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alias module: Allows you to define server-side command aliases
#<module name="m_alias.so">
#
#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_alias.so module loaded, you may also define #
# aliases as shown below. They are commonly used to provide shortcut #
# commands to services, however they are not limited to jsut this use.#
# An alias tag requires the following values to be defined in it: #
# #
# text - The text to detect at the start of the line, #
# must be at the start of the line to trigger the #
# alias. Cant contain spaces, but case insensitive #
# replace - The text to replace 'text' with. Usually this #
# will be "PRIVMSG ServiceName" or similar. #
# requires - If you provide a value for 'requires' this means #
# the given nickname MUST be online for the alias #
# to successfully trigger. If they are not, then #
# the user receives a 'no such nick' 401 numeric. #
# uline - Defining this value with 'yes', 'true' or '1' #
# will ensure that the user given in 'requires' #
# must also be on a u-lined server, as well as #
# actually being on the network. If the user is #
# online, but not on a u-lined server, then an #
# oper-alert is sent out as this is possibly signs #
# of a user trying to impersonate a service. #
# #
#<alias text="NICKSERV" replace="PRIVMSG NickServ" requires="NickServ" uline="yes">
#<alias text="CHANSERV" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes">
#<alias text="NS" replace="PRIVMSG NickServ" requires="NickServ" uline="yes">
#<alias text="CS" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Antibear security module: Prevents 'bear.txt' based trojans from
# connecting to your network by sending them a numeric they can't handle.
#<module name="m_antibear.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Antibottler module: Labels bottler leech bots
#<module name="m_antibottler.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ban except module: Adds support for channel ban exceptions (+e)
#<module name="m_banexception.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block amsg module: Attempt to block all usage of /amsg and /ame
#<module name="m_blockamsg.so">
#
#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_blockamsg.so module loaded, you can configure it #
# with the <blockamsg> tag: #
# #
# delay - How many seconds between two messages to force #
# them to be recognised as unrelated. #
# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
# or 'killopers'. Define how to take action when #
# a user uses /amsg or /ame. #
#
#<blockamsg delay="3" action="killopers">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block CAPS module: Blocking all-CAPS messages with cmode +P
#<module name="m_blockcaps.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block colour module: Blocking colour-coded messages with cmode +c
#<module name="m_blockcolor.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Botmode module: Adds the user mode +B
#<module name="m_botmode.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CBAN module: Lets you disallow channels from being used at runtime.
#<module name="m_cban.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Censor module: Adds the channel mode +G
#<module name="m_censor.so">
#
#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_censor module, then specfiy #
# below the path to the censor.conf file. See also: #
# Censor file, see http://www.inspircd.org/wiki/Censor_Module #
#
#<censor file="/path/to/censor.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel filter module: Allows channel-op defined message
# filtering using simple string matches (channel mode +g)
#<module name="m_chanfilter.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Chanprotect module: gives +q and +a channel modes
#<module name="m_chanprotect.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGHOST module: Adds the /CHGHOST command
#<module name="m_chghost.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGIDENT module: Adds the /CHGIDENT command
#<module name="m_chgident.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Cloaking module: Adds usermode +x and cloaking support
#<module name="m_cloaking.so">
#
#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If ypu specify the m_cloaking.so module as above, you #
# must define cloak keys, and optionally a cloak prefix as shown #
# below. When using cloaking, the cloak keys are MANDITORY and must #
# be included. However, if prefix is not included, it will default #
# to your networks name from the <server> tag. #
# #
# <cloak key1="-543241423" #
# key2="5378410432" #
# key3="1143242382" #
# key4="9504324581" #
# prefix="mynet"> #
# #
# Please note that the key values will accept any number, positive #
# or negative, and should be large numbers. Using small numbers such #
# as "7" or "1924" will seriously weaken the security of your cloak. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Lusers: Shows the LUSERS output on connect
#<module name="m_conn_lusers.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Wait-for-Pong: Don't let a user connect until they PONG
#<module name="m_conn_waitpong.so">
#
#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_conn_waitpong.so module loaded, configure it with #
# the <waitpong> tag: #
# #
# sendsnotice - Whether to send a snotice on connect, like Unreal#
# killonbadreply - Whether to kill the user if they send the wrong #
# PONG reply. #
#
#<waitpong sendsnotice="yes" killonbadreply="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connection throttle module. Configuration:
#<module name="m_connflood.so">
#
#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# seconds, maxconns - Amount of connections per <seconds>.
# timeout - Time to wait after the throttle was activated
# before deactivating it. Be aware that the time
# is seconds + timeout.
# quitmsg - The message that users get if they attempt to
# connect while the throttle is active.
# bootwait - Amount of time to wait before enforcing the
# throttling when the server just booted.
#
#<connflood seconds="30" maxconns="3" timeout="30"
# quitmsg="Throttled" bootwait="10">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deny Channels: Deny Channels from being used by users
#<module name="m_denychans.so">
#
#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_denychans.so module loaded, you need to specify #
# the channels to deny:
# #
# name - The channel name to deny. #
# allowopers - If operators are allowed to override the deny. #
# reason - Reason given for the deny. #
#
#<badchan name="#gods" allowopers="yes" reason="Tortoises!">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Devoice Module: Let users devoice themselves.
#<module name="m_devoice.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides glob-based message filtering
#<module name="m_filter.so">
#OR
# PCRE filter module: Filters messages using regular expressions
#<module name="m_filter_pcre.so">
#
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_filter or m_filter_pcre #
# modules, then specfiy below the path to the filter.conf file. #
#
#<filter file="/path/to/inspircd/filter.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Foobar module - does nothing - historical relic
#<module name="m_foobar.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Globops module: gives /GLOBOPS and usermode +g
#<module name="m_globops.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Global load module: Allows loading and unloading of modules network-
# wide (USE WITH EXTREME CAUTION!)
#<module name="m_globalload.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HELPOP module: Provides the /HELPOP command
#<module name="m_helpop.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_helpop.so module, then #
# specify below the path to the helpop.conf file. #
#
#<helpop file="/path/to/inspircd/helpop.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hostchange module: Allows a different style of cloaking
#<module name="m_hostchange.so">
#
#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you choose to use the m_hostchange.so module. #
# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module #
#
#<host suffix="polarbears.org">
#<hostchange mask="*@fbi.gov" action="addnick">
#<hostchange mask="*r00t@*" action="suffix">
#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# httpd module: Provides http server support for InspIRCd
#<module name="m_httpd.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
# Optional - If you choose to use the m_httpd.so module, then you must
# specify the port number and other details of your http server:
#
#<http ip="192.168.1.10" host="brainwave" port="32006"
# index="/home/brain/inspircd/http/index.html">
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# http stats module: Provides basic stats pages over HTTP
# Required m_httpd.so
#<module name="m_http_stats.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
#
# No extra configuration yet.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ident: Provides RFC 1413 ident lookup support
#<module name="m_ident.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you are using the m_ident.so module, then you can #
# specify the timeout for ident lookups here. If not defined, it will #
# default to one second. This is a non-blocking timeout which holds #
# the user in a 'connecting' state until the lookup is complete. #
#
#<ident timeout="5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invite except module: Adds support for channel invite exceptions (+I)
#<module name="m_inviteexception.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Join flood module: Adds support for join flood protection (+j)
#<module name="m_joinflood.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
#<module name="m_kicknorejoin.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Knock module: adds the /KNOCK command and +K channel mode
#<module name="m_knock.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Msg flood module: Adds message/notice flood protection (+f)
#<module name="m_messageflood.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MySQL module: Allows other SQL modules to access MySQL databases
# through a unified API. You must copy the source for this module
# from the directory src/modules/extra, plus the file m_sqlv2.h
#<module name="m_mysql.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_mysql.so is more complex than described here, see the wiki for #
# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
#
#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nicklock module: Let opers change a user's nick and then stop that
# user from changing their nick again. /NICKLOCK and /NICKUNLOCK
#<module name="m_nicklock.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No ctcp module: Adds the channel mode +C to block CTCPs
#<module name="m_noctcp.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Noinvite module: Gives channel mode +V
#<module name="m_noinvite.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No kicks module: Adds the +Q channel mode
#<module name="m_nokicks.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No nicks module: Adds the +N channel mode
#<module name="m_nonicks.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No Notice module: adds the channel mode +T
#<module name="m_nonotice.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper channels mode: Adds the +O channel mode
#<module name="m_operchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper Join module: Forces opers to join a channel on oper-up
#<module name="m_operjoin.so">
#
#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# If you are using the m_operjoin.so module, specify the channel here #
#
#<operjoin channel="#channel">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper MOTD module: Provides support for seperate message of the day
# on oper-up
#<module name="m_opermotd.so">
#
#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# If you are using the m_opermotd.so module, specify the motd here #
#
#<opermotd file="/path/to/oper.motd">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Override module: Adds support for oper override
#<module name="m_override.so">
#
#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# m_override.so is too complex it describe here, see the wiki: #
# http://www.inspircd.org/wiki/Oper_Override_Module #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper levels module: Gives each oper a level and prevents
# actions being taken against higher level opers
# Specify the level as the 'level' parameter of the <type> tag
#<module name="m_operlevels.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper MD5 module: Allows MD5 hashed oper passwords
#<module name="m_opermd5.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper SHA256 module: Allows SHA256 hashed oper passwords
# This module is in src/modules/extra
#<module name="m_opersha256.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper modes module: Allows you to specify modes to add/remove on oper
# Specify the modes as the 'modes' parameter of the <type> tag
#<module name="m_opermodes.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Parking module: Adds parking support and /PARK and /UNPARK
#<module name="m_park.so">
#
#-#-#-#-#-#-#-#-#-#-#-# PARK CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_park.so is too complex it describe here, see the wiki: #
# http://www.inspircd.org/wiki/User_Parking_Module #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# PostgreSQL module: Allows other SQL modules to access PgSQL databases
# through a unified API. You must copy the source for this module
# from the directory src/modules/extra, plus the file m_sqlv2.h
#<module name="m_pgsql.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_pgsql.so is more complex than described here, see the wiki for #
# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
#
#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Random Quote module: provides a random quote on connect
#<module name="m_randquote.so">
#
#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_randquote.so module, then #
# specify below the path to the randquotes.conf file. #
#
#<randquote file="/path/to/inspircd/randquotes.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Redirect module: Adds channel redirection (mode +L)
#<module name="m_redirect.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remove module: Adds the /REMOVE command which is a peaceful
# alternative to /KICK
#<module name="m_remove.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restricted channels module: Allows only opers to create channels
#<module name="m_restrictchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restrict message module: Allows users to only message opers
#<module name="m_restrictmsg.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Provide /LIST throttling (to prevent flooding) and /LIST safety to
# prevent excess flood when the list is large.
#<module name="m_safelist.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAJOIN module: Adds the /SAJOIN command
#<module name="m_sajoin.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAMODE module: Adds the oper /SAMODE command
#<module name="m_samode.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SANICK module: Allows opers to change user's nicks
#<module name="m_sanick.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAPART module: Adds the oper /SAPART command
#<module name="m_sapart.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
#<module name="m_saquit.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-
# Secure list module: Prevent /LIST in the first minute of connection,
# crippling most spambots and trojan spreader bots.
#<module name="m_securelist.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Set Idle module: Adds a command for opers to change their
# idle time (mainly a toy)
#<module name="m_setidle.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Services support module: Adds several usermodes such as +R and +M
# this module implements the 'identified' state via user mode +r, which
# is similar to the DALnet and dreamforge systems.
#<module name="m_services.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Services support module: Adds several usermodes such as +R and +M
# this module implements the 'identified' state via account names (AC)
# and is similar in operation to the way asuka and ircu handle services.
# it cannot be used at the same time as m_services, above.
#<module name="m_services_account.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Sethost module: Adds the /SETHOST command
#<module name="m_sethost.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Setident module: Adds the /SETIDENT command
#<module name="m_setident.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SETNAME module: Adds the /SETNAME command
#<module name="m_setname.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Show Whois module: Adds the +W usermode which allows opers
# to see when they are whois'ed
#<module name="m_showwhois.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Spy module: Adds the commands SPYLIST and SPYNAMES that let opers
# see who is in a +s channel, and list +s channels, show keys of keyed
# channels the oper is not a member of etc. (standard 'abusive' features
# of unrealircd, modulized here in InspIRCd).
#<module name="m_spy.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL channel mode module: Adds support for SSL-only channels (+z).
# does not do anything useful without a working SSL module (see below)
#<module name="m_sslmodes.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Dummy ssl module: If you have other servers on your network which
# have SSL, but your server does not have ssl enabled, you should load
# this module, which will handle SSL metadata (e.g. the "Is using ssl"
# field in the WHOIS information).
#<module name="m_ssl_dummy.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
# if enabled. You must copy the source for this module from the directory
# src/modules/extra, or answer 'yes' in ./configure when asked if you
# want to enable this, or it will not load.
#<module name="m_ssl_gnutls.so">
#
#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_ssl_gnutls.so is too complex it describe here, see the wiki: #
# http://www.inspircd.org/wiki/GnuTLS_SSL_Module #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
# if enabled. You must copy the source for this module from the directory
# src/modules/extra, or answer 'yes' in ./configure when asked if you
# want to enable this, or it will not load.
#<module name="m_ssl_openssl.so">
#
#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_ssl_openssl.so is too complex it describe here, see the wiki: #
# http://www.inspircd.org/wiki/OpenSSL_SSL_Module #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Strip colour module: Adds the channel mode +S
#<module name="m_stripcolor.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SILENCE module: Adds support for /SILENCE
#<module name="m_silence.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL authentication module: Allows IRCd connections to be tied into
# a database table (for example a forum). You must copy the source for
# this module from the directory src/modules/extra
#<module name="m_sqlauth.so">
#
#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_sqlauth.so is too complex it describe here, see the wiki: #
# http://www.inspircd.org/wiki/SQL_Authentication_Module #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL logging module: Allows you to log network-wide data for your
# network in a fully normalized set of SQL tables. You must copy the
# source for this module from the directory src/modules/extra
#<module name="m_sqllog.so">
#
#-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# dbid - Database ID to use (see m_sql) #
# #
# See also: http://www.inspircd.org/wiki/SQL_Logging_Module #
# #
#<sqllog dbid="1">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL oper module: Allows you to store oper credentials in an SQL table
# You must copy the source for this module from the directory src/modules/extra
#<module name="m_sqloper.so">
#
#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# dbid - Database ID to use (see m_sql) #
# #
# See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module #
# #
#<sqloper dbid="1">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SWHOIS module: Allows you to add arbitary lines to user WHOIS.
#<module name="m_swhois.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Test command module: Does nothing significant. Read: pointless.
#<module name="m_testcommand.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Timed bans module: Adds timed bans and the /TBAN command
#<module name="m_timedbans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Test line module: Adds the /TLINE command, used to test how many
# users a /GLINE or /ZLINE etc would match.
#<module name="m_tline.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Uninvite module: Adds the /UNINVITE command which lets users remove
# pending invites from channels without waiting for the user to join.
#<module name="m_uninvite.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Userip module: Adds the /USERIP command
#<module name="m_userip.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Vhost module: Adds the VHOST command which allows for adding virtual
# hosts which are accessible using a username and password in the config.
#<module name="m_vhost.so">
#
#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# user - Username for the vhost. #
# #
# pass - Password for the vhost. #
# #
# host - Vhost to set. #
#
#<vhost user="some_username" pass="some_password" host="some.host">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Watch module: Adds the WATCH command, which is used by clients to
# maintain notify lists.
#<module name="m_watch.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# The ban tags define nick masks, host masks and ip ranges which are #
# banned from your server. All details in these tags are local to #
# Your server. #
# #
# #
# badip lines ban an ip range (same as a zline) #
# #
# ipmask - The ip range to ban (wildcards possible) #
# CIDR is supported in the IP mask. #
# reason - Reason to display when disconnected #
# #
# badnick lines ban a nick mask (same as a qline) #
# #
# nick - Nick mask to ban (wildcards possible) #
# reason - Reason to display on /NICK #
# #
# badhost lines ban a user@host mask (same as a kline) #
# #
# host - ident@hostname (wildcards possible) #
# If you specify an IP, CIDR is supported. #
# reason - Reason to display on disconnection #
# #
# exception lines define a hostmask that is excempt from [kzg]lines #
# #
# host - ident@hostname (wildcards possible) #
# If you specify an IP, CIDR is supported. #
# reason - Reason, shown only in /stats e #
# #
<badip ipmask="69.69.69.69" reason="No porn here thanks.">
<badnick nick="ChanServ" reason="Reserved For Services">
<badnick nick="NickServ" reason="Reserved For Services">
<badnick nick="OperServ" reason="Reserved For Services">
<badnick nick="MemoServ" reason="Reserved For Services">
<badhost host="*@hundredz.n.hundredz.o.1337.kiddies.com" reason="Too many 1337 kiddiots">
<badhost host="*@localhost" reason="No irc from localhost!">
<badhost host="*@172.32.0.0/16" reason="This subnet is bad.">
<exception host="*@ircop.host.com" reason="Opers hostname">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# You should already know what to do here :) #
<die value="You should probably edit your config *PROPERLY* and try again.">
#########################################################################
# #
# - InspIRCd Development Team - #
# http://www.inspircd.org #
# #
#########################################################################
Reference in New Issue View Git Blame Copy Permalink