ouch/inspircd
2
0
Fork 0
mirror of https://github.com/inspircd/inspircd.git synced 2025-03-10 02:59:01 -04:00
Code Issues Packages Projects Releases Wiki Activity
inspircd/configure
frostycoolslug d59e531c86 Fixed Non Fatal Warning: 
./configure: line 485: [: : integer expression expected


git-svn-id: http://svn.inspircd.org/repository/trunk/inspircd@1045 e03df62e-2008-0410-955e-edbf42e46eb7
2005-04-11 17:47:57 +00:00

588 lines
19 KiB
Bash
Executable File
Raw Blame History

#!/bin/sh
# InspIRCd Configuration Script
#
# Copyright 2003 The ChatSpike Development Team
# <brain@chatspike.net>
# <Craig@chatspike.net>
#
# $Id$
#
#
########################################
echo "Configuring default values..."
ME=`pwd`
GCCVER=`gcc -dumpversion | cut -c 1`
GCC34=`gcc -dumpversion | cut -c 3`
CONFIG_DIR=$ME/conf
MODULE_DIR=$ME/modules
BINARY_DIR=$ME/bin
INSTALL=`which install`
OPTIMITEMP=0
OPTIMISATI="-g"
MAX_CLIENT_T=`ulimit -n`
NICK_LENGT=32
CHAN_LENGT=64
MAX_CHANNE=20
MAXI_MODES=20
HAS_STRLCPY=0
OSNAME=`(uname -s) 2>/dev/null` || OSNAME="unknown"
if [ -z $MAX_CLIENT_T ] ; then
MAX_CLIENT_T=1024
SCAN_FAILED=1
fi
if [ "$1" = "-clean" -o "$2" = "-clean" ] ; then
`rm -rf .config.cache`
fi
if [ -e ".config.cache" -a -z "$CLEAN" ] ; then
. .config.cache
fi
if [ "$1" = "-update" -o "$2" = "-update" ] ; then
# They wanna update their Makefile.. good for 'em
# Make sure .config.cache exists
if [ ! -e ".config.cache" ] ; then
echo "You have not run ./configure before. Please do this before trying to run the update script."
exit 0
fi
# Right, load the cache values
. .config.cache
# Check for modules
case "$OSNAME" in
FreeBSD)
LDLIBS="-Ldl"
FLAGS="-fPIC -frtti $OPTIMISATI"
MAKEPROG="gmake"
;;
*)
LDLIBS="-ldl"
FLAGS="-fPIC -frtti $OPTIMISATI"
MAKEPROG="make"
;;
esac
MODULES=""
for module in src/modules/*.cpp ; do
mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
MODULES="$MODULES $mod"
done
# Write the new makefile.
for file in Makefile; do
echo -e "\033[0mWriting \033[1;32m$file\033[0m"
rm -f $file
sed -e "
s%@MAKEPROG@%$MAKEPROG%g
s%@FLAGS@%$FLAGS%g
s%@LDLIBS@%$LDLIBS%g
s%@CONFIG_DIR@%$CONFIG_DIR%g
s%@MODULE_DIR@%$MODULE_DIR%g
s%@BINARY_DIR@%$BINARY_DIR%g
s%@MODULES@%$MODULES%g
" .${file}.inc >> $file
done
echo -e "\033[0mWriting \033[1;32msrc/modules/Makefile\033[0m"
rm -f src/modules/Makefile
# Generate the Header..
echo "# (C) ChatSpike development team" >> src/modules/Makefile
echo "# Makefile by <Craig@ChatSpike.net>" >> src/modules/Makefile
echo "# Many Thanks to Andrew Church <achurch@achurch.org>" >> src/modules/Makefile
echo "# for assisting with making this work right." >> src/modules/Makefile
echo "#" >> src/modules/Makefile
echo "# Automatically Generated by ./configure to add a module" >> src/modules/Makefile
echo "# please run ./configure --update" >> src/modules/Makefile
echo "" >> src/modules/Makefile
echo "all: \$(MODULES)" >> src/modules/Makefile
echo "" >> src/modules/Makefile
for module in src/modules/*.cpp ; do
flags=`grep '$CompileFlags: ' $module | sed 's/\/\* $CompileFlags://' | sed 's/\*\///'`
mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
mod2=`echo $module | sed 's/src\/modules\///'`
echo "$mod: $mod2 ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/servers.h ../../include/base.h" >> src/modules/Makefile
echo " \$(CC) -I../../include \$(FLAGS) -shared$flags -o $mod $mod2" >> src/modules/Makefile
echo " @cp $mod \$(MODPATH)/" >> src/modules/Makefile
echo "" >> src/modules/Makefile
done
echo "Complete."
exit 1;
fi
if [ -z $MAX_CLIENT ] ; then
MAX_CLIENT=$MAX_CLIENT_T
fi
c=""
n=""
if [ "`eval echo -e -n 'a'`" = "-n a" ] ; then
c="\c"
else
n="-n"
fi
exists () { # because some shells don't have test -e
if [ -f $1 -o -d $1 -o -p $1 -o -c $1 -o -b $1 ] ; then
return 0
else
return 1
fi
}
echo "#include <string.h>">.test.cpp
echo "#include <stdio.h>">>.test.cpp
echo "int main() { char a[10]; char b[10]; strlcpy(a,b,10); printf(\"%d\\n\",9); }" >>.test.cpp
g++ -o .test .test.cpp 2>&1
if [ -e ".test" ] ; then
HAS_STRLCPY=1
fi
rm -f .test.cpp .test
clear
echo -e "'\033[1;33m####\033[0m:'\033[1;33m##\033[0m::: \033[1;33m##\033[0m::'\033[1;33m######\033[0m::'\033[1;33m########\033[0m::'\033[1;33m####\033[0m:'\033[1;33m########\033[0m:::'\033[1;33m######\033[0m::'\033[1;33m########\033[0m::"
echo -e ". \033[1;33m##\033[0m:: \033[1;33m###\033[0m:: \033[1;33m##\033[0m:'\033[1;33m##\033[0m... \033[1;33m##\033[0m: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:. \033[1;33m##\033[0m:: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:'\033[1;33m##\033[0m... \033[1;33m##\033[0m: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:"
echo -e ": \033[1;33m##\033[0m:: \033[1;33m####\033[0m: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::..:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::..:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m \033[1;33m##\033[0m \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m########\033[0m::: \033[1;33m##\033[0m:: \033[1;33m########\033[0m:: \033[1;33m##\033[0m::::::: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m. \033[1;33m####\033[0m::..... \033[1;33m##\033[0m: \033[1;33m##\033[0m.....:::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m.. \033[1;33m##\033[0m::: \033[1;33m##\033[0m::::::: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m:. \033[1;33m###\033[0m:'\033[1;33m##\033[0m::: \033[1;33m##\033[0m: \033[1;33m##\033[0m::::::::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m::. \033[1;33m##\033[0m:: \033[1;33m##\033[0m::: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
echo -e "'\033[1;33m####\033[0m: \033[1;33m##\033[0m::. \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m##\033[0m::::::::'\033[1;33m####\033[0m: \033[1;33m##\033[0m:::. \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m########\033[0m::"
echo -e "\033[0m\033[0m....::..::::..:::......:::..:::::::::....::..:::::..:::......:::........:::"
echo ""
echo "Welcome to the InspIRCd Configuration program!"
echo ""
echo "*** If you are unsure of any of these values, leave it blank for ***"
echo "*** standard settings that will work, and your server will run ***"
echo "*** using them. If you are running this server as part of a ***"
echo "*** larger network, you must consult with your network admins ***"
echo "*** for the proper values to use, or server links will be unstable! ***"
echo ""
echo -e "Press \033[1m<RETURN>\033[0m to accept the default for any option, or enter"
echo -e "a new value. Please note: You will \033[1mHAVE\033[0m to read the docs"
echo -e "dir, otherwise you won't have a config file!"
echo ""
echo -e "Your operating system is: \033[1;32m$OSNAME\033[0m (`uname -mnr`), fdmax: $MAX_CLIENT_T"
echo ""
#############################################################################
ok=0
asked=1
echo "In what directory are the configuration files?"
while [ $ok -eq 0 ] ; do
echo -e $n "[\033[1;32m$CONFIG_DIR\033[0m] -> $c"
if read INPUT ; then : ; else echo "" ; exit 1 ; fi
if [ ! "$INPUT" ] ; then
INPUT=$CONFIG_DIR
default=1
fi
if echo "$INPUT" | grep -q \[\'\"\\\] ; then
echo 'Please use a pathname without the characters: '\'' " \'
elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
if exists "$INPUT" ; then
echo "$INPUT exists, but is not a directory!"
else
echo "$INPUT does not exist. Create it?"
echo -e $n "[\033[1;32my\033[0m] $c"
read YN
if [ "$YN" != "n" ] ; then
if mkdir -p "$INPUT" ; then
ok=1
fi
fi
fi
else
ok=1
fi
done
CONFIG_DIR=$INPUT
echo ""
##############################################################################
ok=0
asked=1
echo "In What directory are the modules to be compiled to?"
while [ $ok -eq 0 ] ; do
echo -e $n "[\033[1;32m$MODULE_DIR\033[0m] -> $c"
if read INPUT ; then : ; else echo "" ; exit 1 ; fi
if [ ! "$INPUT" ] ; then
INPUT=$MODULE_DIR
default=1
fi
if echo "$INPUT" | grep -q \[\'\"\\\] ; then
echo 'Please use a pathname without the characters: '\'' " \'
elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
if exists "$INPUT" ; then
echo "$INPUT exists, but is not a directory!"
else
echo "$INPUT does not exist. Create it?"
echo -e $n "[\033[1;32my\033[0m] $c"
read YN
if [ "$YN" != "n" ] ; then
if mkdir -p "$INPUT" ; then
ok=1
fi
fi
fi
else
ok=1
fi
done
MODULE_DIR=$INPUT
echo ""
##############################################################################
ok=0
asked=1
echo "In what directory is the IRCd binary to be placed?"
while [ $ok -eq 0 ] ; do
echo -e $n "[\033[1;32m$BINARY_DIR\033[0m] -> $c"
if read INPUT ; then : ; else echo "" ; exit 1 ; fi
if [ ! "$INPUT" ] ; then
INPUT=$BINARY_DIR
default=1
fi
if echo "$INPUT" | grep -q \[\'\"\\\] ; then
echo 'Please use a pathname without the characters: '\'' " \'
elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
if exists "$INPUT" ; then
echo "$INPUT exists, but is not a directory!"
else
echo "$INPUT does not exist. Create it?"
echo -e $n "[\033[1;32my\033[0m] $c"
read YN
if [ "$YN" != "n" ] ; then
if mkdir -p "$INPUT" ; then
ok=1
fi
fi
fi
else
ok=1
fi
done
BINARY_DIR=$INPUT
echo ""
###############################################################################
# Craigs Version 3 With slightly less Cheeze :p
cheeze=0
echo -e "Maximum number of clients at any one time (\033[1;32m1-$MAX_CLIENT_T\033[0m)?"
while [ "$cheeze" -eq "0" ] ; do
echo -e $n "[\033[1;32m$MAX_CLIENT\033[0m] -> $c"
read cc
if [ -z "$cc" ] ; then
cc=$MAX_CLIENT
fi
case "$cc" in
[0-9]*)
if [ "$cc" -gt "$MAX_CLIENT_T" -a -z "$SCAN_FAILED" ] ; then
echo -e "WARNING: Our scans have indicated that you are attempting"
echo -e "to use more sockets than there are avaliable. Are you sure"
echo -e "you wish to do this? It may cause the IRCd to malfunction [y/n]"
echo -e $n "[\033[1;32mn\033[0m] -> $c"
read YN
if [ "$YN" = "y" ] ; then
MAX_CLIENT=$cc
cheeze=1
else
echo ""
echo -e "Please enter the correct value (\033[1;32m1-$MAX_CLIENT_T\033[0m)"
fi
else
echo $SCAN_FAILED
cheeze=1
MAX_CLIENT=$cc
fi
;;
*)
echo ""
echo "You must enter a number in this field. Please try again."
;;
esac
done
echo ""
###############################################################################
cheeze=0
echo -e "What is the Maximum length of nicknames?"
while [ "$cheeze" -eq "0" ] ; do
echo -e $n "[\033[1;32m$NICK_LENGT\033[0m] -> $c"
read cc
if [ "$cc" ] ; then
case "$cc" in
[0-9]*)
NICK_LENGT=$cc
cheeze=1
;;
*)
echo ""
echo "You Must Enter a Number in this field. Please Try Again."
cheeze=0
;;
esac
else
cheeze=1
fi
done
echo ""
###############################################################################
cheeze=0
echo -e "What is the Maximum length of channel names?"
while [ "$cheeze" -eq "0" ] ; do
echo -e $n "[\033[1;32m$MAX_CHANNE\033[0m] -> $c"
read cc
if [ "$cc" ] ; then
case "$cc" in
[0-9]*)
MAX_CHANNE=$cc
cheeze=1
;;
*)
echo ""
echo "You Must Enter a Number in this field. Please Try Again."
cheeze=0
;;
esac
else
cheeze=1
fi
done
echo ""
###############################################################################
cheeze=0
echo -e "What is the Maximum number of mode changes in one line?"
while [ "$cheeze" -eq "0" ] ; do
echo -e $n "[\033[1;32m$MAXI_MODES\033[0m] -> $c"
read cc
if [ "$cc" ] ; then
case "$cc" in
[0-9]*)
MAXI_MODES=$cc
cheeze=1
;;
*)
echo ""
echo "You Must Enter a Number in this field. Please Try Again."
cheeze=0
;;
esac
else
cheeze=1
fi
done
echo ""
###############################################################################
# Code Optimisation?
cheeze=0
echo -e "Enter the Level Of Binary optimisation. This is a number between 0 and 3 (inclusive)"
echo -e "The InspIRCd Team will _NOT_ support any bug reports above 0."
echo -e "Also note, the IRCd behaviour will be different depending on this value."
echo -e "Please read the documentation for more information."
echo -e ""
echo -e "The Higher the number, the more optimised your binary will be. This value will default to 0"
echo -e "If you either a) Dont enter a number, or b) Enter a value outside the range."
echo -e $n "[\033[1;32m$OPTIMITEMP\033[0m] -> $c"
read cc
if [ -z "$cc" ] ; then
cc=$OPTIMITEMP
fi
case "$cc" in
1)
OPTIMITEMP=1
OPTIMISATI="-O"
;;
2)
OPTIMITEMP=2
OPTIMISATI="-O2"
;;
3)
OPTIMITEMP=3
OPTIMISATI="-O3"
;;
*)
OPTIMITEMP=0
OPTIMISATI="-g"
;;
esac
echo ""
###############################################################################
echo -e "\033[1;32mPre-build configuration is complete!\033[0m"
echo ""
echo -e "\033[0mConfig path:\033[1;32m\t\t\t$CONFIG_DIR"
echo -e "\033[0mModule path:\033[1;32m\t\t\t$MODULE_DIR"
echo -e "\033[0mMax connections:\033[1;32m\t\t$MAX_CLIENT"
echo -e "\033[0mMax User Channels\033[1;32m\t\t$MAX_CHANNE"
echo -e "\033[0mMax nickname length:\033[1;32m\t\t$NICK_LENGT"
echo -e "\033[0mMax channel length:\033[1;32m\t\t$CHAN_LENGT"
echo -e "\033[0mMax mode length:\033[1;32m\t\t$MAXI_MODES"
echo -e "\033[0mGCC Version Found:\033[1;32m\t\t$GCCVER.$GCC34"
echo -e "\033[0mOptimatizaton Flag:\033[1;32m\t\t$OPTIMISATI"
echo -e "\033[0m"
echo "Writing cache file for future ./configures ..."
COPY_CONF=0
if [ "$CONFIG_DIR" != "$ME/conf" ] ; then
COPY_CONF=1
fi
if [ -e ".config.cache" ] ; then
rm .config.cache
fi
echo "CONFIG_DIR=\"$CONFIG_DIR\"" >> .config.cache
echo "MODULE_DIR=\"$MODULE_DIR\"" >> .config.cache
echo "BINARY_DIR=\"$BINARY_DIR\"" >> .config.cache
echo "MAX_CLIENT=\"$MAX_CLIENT\"" >> .config.cache
echo "MAX_CHANNE=\"$MAX_CHANNE\"" >> .config.cache
echo "NICK_LENGT=\"$NICK_LENGT\"" >> .config.cache
echo "MAXI_MODES=\"$MAXI_MODES\"" >> .config.cache
echo "OPTIMITEMP=\"$OPTIMITEMP\"" >> .config.cache
echo "OPTIMISATI=\"$OPTIMISATI\"" >> .config.cache
echo "GCC34=\"$GCC34\"" >> .config.cache
echo "HAS_STRLCPY=\"$HAS_STRLCPY\"" >> .config.cache
echo "COPY_CONF=\"$COPY_CONF\"" >> .config.cache
echo -e "Writing \033[1;32minspircd_config.h"
echo "/* Auto generated by configure, do not modify! */" >include/inspircd_config.h
echo "" >>include/inspircd_config.h
if [ "$GCCVER" -eq "3" ] ; then
echo "#define GCC3" >>include/inspircd_config.h
if [ "$GCC34" -gt "3" ] ; then
echo "#define GCC34" >>include/inspircd_config.h
fi
fi
if [ "$HAS_STRLCPY" -eq "1" ] ; then
echo "#define HAS_STRLCPY" >>include/inspircd_config.h
fi
echo "#define SYSLOG_FACILITY LOG_DAEMON" >>include/inspircd_config.h
echo "#define SYSLOG_LEVEL LOG_NOTICE" >>include/inspircd_config.h
echo "#define CONFIG_FILE \"$CONFIG_DIR/inspircd.conf\"" >>include/inspircd_config.h
echo "#define MOD_PATH \"$MODULE_DIR\"" >>include/inspircd_config.h
echo "#define VERSION \"`sh ./src/version.sh`\"" >>include/inspircd_config.h
echo "#define MAXCLIENTS $MAX_CLIENT" >>include/inspircd_config.h
echo "#define NICKMAX $NICK_LENGT" >>include/inspircd_config.h
echo "#define CHANMAX $CHAN_LENGT" >>include/inspircd_config.h
echo "#define MAXCHANS $MAX_CHANNE" >>include/inspircd_config.h
echo "#define MAXMODES $MAXI_MODES" >>include/inspircd_config.h
echo "#define OPTIMISATION $OPTIMITEMP" >>include/inspircd_config.h
echo "#define SYSTEM \"`uname -n -s -r`\"" >>include/inspircd_config.h
echo "#define MAXBUF 514">>include/inspircd_config.h
touch include/inspircd_config.h
case "$OSNAME" in
FreeBSD)
LDLIBS="-Ldl"
FLAGS="-fPIC -frtti $OPTIMISATI"
MAKEPROG="gmake"
;;
*)
LDLIBS="-ldl"
FLAGS="-fPIC -frtti $OPTIMISATI"
MAKEPROG="make"
;;
esac
MODULES=""
for module in src/modules/*.cpp ; do
mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
MODULES="$MODULES $mod"
done
for file in Makefile inspircd; do
echo -e "\033[0mWriting \033[1;32m$file\033[0m"
rm -f $file
sed -e "
s%@MAKEPROG@%$MAKEPROG%g
s%@FLAGS@%$FLAGS%g
s%@LDLIBS@%$LDLIBS%g
s%@CONFIG_DIR@%$CONFIG_DIR%g
s%@MODULE_DIR@%$MODULE_DIR%g
s%@BINARY_DIR@%$BINARY_DIR%g
s%@MODULES@%$MODULES%g
" .${file}.inc >> $file
done
`chmod 700 inspircd`
echo -e "\033[0mWriting \033[1;32msrc/modules/Makefile\033[0m"
rm -f src/modules/Makefile
# Generate the Header..
echo "# (C) ChatSpike development team" >> src/modules/Makefile
echo "# Makefile by <Craig@ChatSpike.net>" >> src/modules/Makefile
echo "# Many Thanks to Andrew Church <achurch@achurch.org>" >> src/modules/Makefile
echo "# for assisting with making this work right." >> src/modules/Makefile
echo "#" >> src/modules/Makefile
echo "# Automatically Generated by ./configure to add a module" >> src/modules/Makefile
echo "# please run ./configure --update" >> src/modules/Makefile
echo "" >> src/modules/Makefile
echo "all: \$(MODULES)" >> src/modules/Makefile
echo "" >> src/modules/Makefile
for module in src/modules/*.cpp ; do
flags=`grep '$CompileFlags: ' $module | sed 's/\/\* $CompileFlags://' | sed 's/\*\///'`
mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
mod2=`echo $module | sed 's/src\/modules\///'`
echo "$mod: $mod2 ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/servers.h ../../include/base.h" >> src/modules/Makefile
echo " \$(CC) -I../../include \$(FLAGS) -shared$flags -o $mod $mod2" >> src/modules/Makefile
echo " @cp $mod \$(MODPATH)/" >> src/modules/Makefile
echo "" >> src/modules/Makefile
done
echo ""
echo ""
echo "Do you want to compile the IRCd binaries?"
echo -e $n "[\033[1;32my\033[0m] $c"
read YN
if [ "$YN" != "n" ] ; then
echo ""
echo -e "\033[1;32mCompiling...\033[0m"
echo ""
cd $ME
$MAKEPROG
echo ""
echo "Done!"
else
echo ""
echo -e "To build your server with these settings, please type '\033[1;32m$MAKEPROG\033[0m' now."
fi
echo ""
echo -e "*** \033[1;32mRemember to edit your configuration files!!!\033[0m ***"
echo ""
Reference in New Issue View Git Blame Copy Permalink