inspircd/docs/conf/opers.conf.example

#-#-#-#-#-#-#-#-#-#-#-#-  CLASS CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-
#                                                                     #
#   Classes are a group of commands which are grouped together and    #
#   given a unique name. They're used to define which commands        #
#   are available to certain types of Operators.                      #
#                                                                     #
#                                                                     #
#  Note: It is possible to make a class which covers all available    #
#  commands. To do this, specify commands="*". This is not really     #
#  recommended, as it negates the whole purpose of the class system,  #
#  however it is provided for fast configuration (e.g. in test nets). #
#                                                                     #

<class
     name="Shutdown"

     # commands: Oper-only commands that opers of this class can run.
     commands="DIE RESTART REHASH LOADMODULE UNLOADMODULE RELOADMODULE GLOADMODULE GUNLOADMODULE GRELOADMODULE"

     # privs: Special privileges that users with this class may utilise.
     #  VIEWING:
     #   - channels/auspex: allows opers with this priv to see more detail about channels than normal users.
     #   - users/auspex: allows opers with this priv to view more details about users than normal users, e.g. real host and IP.
     #   - users/channel-spy: allows opers with this priv to view the private/secret channels that a user is on.
     #   - servers/auspex: allows opers with this priv to see more detail about server information than normal users.
     # ACTIONS:
     #   - users/mass-message: allows opers with this priv to PRIVMSG and NOTICE to a server mask (e.g. NOTICE $*)
     #   - users/samode-usermodes: allows opers with this priv to change the user modes of any other user using /SAMODE
     # PERMISSIONS:
     #   - users/flood/no-fakelag: prevents opers from being penalized with fake lag for flooding (*NOTE)
     #   - users/flood/no-throttle: allows opers with this priv to send commands without being throttled (*NOTE)
     #   - users/flood/increased-buffers: allows opers with this priv to send and receive data without worrying about being disconnected for exceeding limits (*NOTE)
     #
     # *NOTE: These privs are potentially dangerous, as they grant users with them the ability to hammer your server's CPU/RAM as much as they want, essentially.
     privs="users/auspex channels/auspex servers/auspex users/mass-message users/flood/no-throttle users/flood/increased-buffers"

     # usermodes: Oper-only usermodes that opers with this class can use.
     usermodes="*"

     # chanmodes: Oper-only channel modes that opers with this class can use.
     chanmodes="*">

<class name="SACommands" commands="SAJOIN SAPART SANICK SAQUIT SATOPIC SAKICK SAMODE OJOIN">
<class name="ServerLink" commands="CONNECT SQUIT RCONNECT RSQUIT MKPASSWD ALLTIME SWHOIS JUMPSERVER LOCKSERV UNLOCKSERV" usermodes="*" chanmodes="*" privs="servers/auspex">
<class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE ELINE TLINE RLINE CHECK NICKLOCK NICKUNLOCK SHUN CLONES CBAN CLOSE" usermodes="*" chanmodes="*">
<class name="OperChat" commands="WALLOPS GLOBOPS" usermodes="*" chanmodes="*" privs="users/mass-message">
<class name="HostCloak" commands="SETHOST SETIDENT SETIDLE CHGNAME CHGHOST CHGIDENT" usermodes="*" chanmodes="*" privs="users/auspex">


#-#-#-#-#-#-#-#-#-#-#-#-  OPERATOR COMPOSITION   -#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
#   This is where you specify which types of operators you have on    #
#   your server, as well as the commands they are allowed to use.     #
#   This works alongside with the classes specified above.            #
#                                                                     #

<type
    # name: Name of type. Used in actual server operator accounts below.
    name="NetAdmin"

    # classes: Classes (blocks above) that this type belongs to.
    classes="SACommands OperChat BanControl HostCloak Shutdown ServerLink"

    # vhost: Host opers of this type get when they log in (oper up). This is optional.
    vhost="netadmin.omega.example.org"

    # maxchans: Maximum number of channels opers of this type can be in at once.
    maxchans="60"

    # modes: User modes besides +o that are set on an oper of this type
    # when they oper up. Used for snomasks and other things.
    # Requires the opermodes module be loaded.
    modes="+s +cCqQ">

<type name="GlobalOp" classes="SACommands OperChat BanControl HostCloak ServerLink" vhost="ircop.omega.example.org">
<type name="Helper" classes="HostCloak" vhost="helper.omega.example.org">


#-#-#-#-#-#-#-#-#-#-#-  OPERATOR CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
#   Opers are defined here. This is a very important section.         #
#   Remember to only make operators out of trustworthy people.        #
#                                                                     #

# Operator account with a plain-text password.
<oper
      # name: Oper login that is used to oper up (/oper name password).
      # Remember: This is case sensitive.
      name="Attila"

      # password: Case-sensitive, unhashed (plaintext).
      password="s3cret"

      # host: What hostnames and IPs are allowed to use this operator account.
      # Multiple options can be separated by spaces and CIDRs are allowed.
      # You can use just * or *@* for this section, but it is not recommended
      # for security reasons.
      host="attila@inspircd.org *@2001:db8::/32"

      # ** ADVANCED ** This option is disabled by default.
      # fingerprint: When using the sslinfo module, you may specify
      # a key fingerprint here. This can be obtained by using the /sslinfo
      # command while the module is loaded, and is also noticed on connect.
      # This enhances security by verifying that the person opering up has
      # a matching SSL client certificate, which is very difficult to
      # forge (impossible unless preimage attacks on the hash exist).
      # If the sslinfo module isn't loaded, this option will be ignored.
      #fingerprint="67cb9dc013248a829bb2171ed11becd4"

      # autologin: If an SSL certificate fingerprint for this oper is specified,
      # you can have the oper block automatically log in. This moves all security
      # of the oper block to the protection of the client certificate, so be sure
      # that the private key is well-protected! Requires the sslinfo module.
      #autologin="on"

      # sslonly: If on, this oper can only oper up if they're using a SSL connection.
      # Setting this option adds a decent bit of security. Highly recommended
      # if the oper is on wifi, or specifically, unsecured wifi. Note that it
      # is redundant to specify this option if you specify a fingerprint.
      # This setting only takes effect if the sslinfo module is loaded.
      #sslonly="yes"

      # vhost: Overrides the vhost in the type block. Class and modes may also
      # be overridden.
      vhost="attila.example.org"

      # type: Which type of operator this person is; see the block
      # above for the list of types. NOTE: This is case-sensitive as well.
      type="NetAdmin">

# Operator with a plaintext password and no comments, for easy copy & paste.
<oper
      name="Brain"
      password="youshouldhashthis"
      host="brain@dialup15.isp.test.com *@localhost *@example.com *@2001:db8::/32"
      #fingerprint="67cb9dc013248a829bb2171ed11becd4"
      type="NetAdmin">

# Operator with a hashed password. It is highly recommended to use hashed passwords.
<oper
      # name: Oper login that is used to oper up (/oper name password).
      # Remember: This is case sensitive.
      name="Adam"

      # hash: the hash function this password is hashed with. Requires the
      # module for the selected function (bcrypt, md5, sha1, sha256, or
      # ripemd160) and the password hashing module (password_hash) to be
      # loaded.
      # You may also use any of the above other than bcrypt prefixed with
      # either "hmac-" or "pbkdf2-hmac-" (requires the pbkdf2 module).
      # Create hashed passwords with: /mkpasswd <hash> <password>
      hash="bcrypt"

      # password: A hash of the password (see above option) hashed
      # with /mkpasswd <hash> <password>. See the password_hash module
      # in modules.conf for more information about password hashing.
      password="qQmv3LcF$Qh63wzmtUqWp9OXnLwe7yv1GcBwHpq59k2a0UrY8xe0"

      # host: What hostnames and IPs are allowed to use this operator account.
      # Multiple options can be separated by spaces and CIDRs are allowed.
      # You can use just * or *@* for this section, but it is not recommended
      # for security reasons.
      host="*@127.0.0.1 *@192.0.2.40 *@198.51.100.4"

      # type: Which type of operator this person is; see the block
      # above for the list of types. NOTE: This is case-sensitive as well.
      type="Helper">