ouch/inspircd
2
0
Fork 0
mirror of https://github.com/inspircd/inspircd.git synced 2025-03-10 11:09:04 -04:00
Code Issues Packages Projects Releases Wiki Activity
inspircd/docs/inspircd.conf.example

2098 lines
116 KiB
Plaintext
Raw Blame History

########################################################################
# #
# ___ ___ ____ ____ _ #
# |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | #
# | || '_ \/ __| '_ \| || |_) | | / _` | #
# | || | | \__ \ |_) | || _ <| |__| (_| | #
# |___|_| |_|___/ .__/___|_| \_\\____\__,_| #
# |_| #
# ____ __ _ _ _ #
# / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ #
# | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ #
# | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | #
# \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| #
# |___/ #
# #
##################################||####################################
#||#
##################################||####################################
# #
# This is an example of the config file for InspIRCd. #
# Change the options to suit your network #
# #
# Last updated on : 03 Feb 2007 #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT #
# lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even #
# if you've configured InspIRCd before, these probably indicate #
# something new or different to this version and you SHOULD READ IT. #
# #
########################################################################
# #
# Unalphabeticalise the modules list at your own risk #
# #
########################################################################
#-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
# #
# Here is where you enter the information about your server. #
# #
# Syntax is as follows: #
# #
# <server name="server.name" #
# description="Server Description" #
# network="MyNetwork"> #
# #
<server name="penguin.omega.org.za"
description="Waddle World"
network="Omega">
#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Describes the Server Administrator's real name (optionally), #
# nick, and email address. #
# #
# Syntax is as follows: #
# <admin name="real name" #
# nick="nick name" #
# email="email@address.com"> #
# #
<admin name="Johnny English"
nick="MI5"
email="MI5@the.best.secret.agent">
#-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
# #
# Enter the port and address bindings here. #
# #
# bind address - specifies which address ports bind to. Leaving this #
# field blank binds the port to all IPs available. #
# #
# port - The port number to bind to. You may specify a port #
# range here, e.g. "6667-6669,7000,7001". If you do #
# this, the server will count each port within your #
# range as a seperate binding, making the above #
# example equivalent to five seperate bind tags. #
# A failure on one port in the range does not prevent #
# the entire range from being bound, just that one #
# port number. #
# #
# type - can be 'clients' or 'servers'. The clients type is #
# a standard tcp based socket, the servers type is a #
# also a TCP based connection but of a different #
# format. SSL support is provided by modules, to #
# enable SSL support, please read the module section #
# of this configuration file. #
# #
# ssl - When using m_ssl_gnutls.so or m_ssl_openssl.so #
# modules, you must define this value to use ssl on #
# that port. valid values are 'gnutls' or 'openssl' #
# respectively. If the module is not loaded, this #
# setting is ignored. #
# #
# transport - If you have m_spanningtree.so loaded, along with #
# either of the SSL modules (m_ssl_gnutls or #
# m_ssl_openssl) or m_ziplinks.so, then you may make #
# use of this value. #
# setting it to 'openssl' or 'gnutls' or 'zip' #
# indicates that the port should accept connections #
# using the given transport name. Transports are #
# layers which sit on top of a socket and change the #
# way data is sent and received, e.g. encryption, #
# compression, and other such things. Because this #
# may not be limited in use to just encryption, #
# the 'ssl' value used for client ports does not #
# exist for servers, and this value is used instead. #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# If you want to link servers to InspIRCd you must load the #
# m_spanningtree module! Please see the modules list below for #
# information on how to load this module! If you do not load this #
# module, server ports will NOT be bound! #
# #
# Leaving address empty binds to all available interfaces #
# #
# Syntax is as follows: #
# #
# <bind address="ip address" port="port" type="clients"> #
# <bind address="ip address" port="port" type="servers"> #
# #
# If InspIRCd is built for IPV6, and you wish to accept IPV4 clients, #
# then you can specify IPV4 ip addresses here to bind. You may also #
# use the 4in6 notation, ::ffff:1.2.3.4, where 1.2.3.4 is the IPV4 #
# address to bind the port, but as of InspIRCd 1.1.1, this is not #
# required. #
# #
# ------------------------------------------------------------------- #
# #
# PLEASE NOTE: If you have build InspIRCd as an ipv6 server, and you #
# specify an empty bind address, the binding will be bound to ALL THE #
# IPV6 IP ADDRESSES, and not the ipv4 addresses. If you are using an #
# ipv6 enabled InspIRCd and want to bind to multiple IPV4 addresses #
# in this way, you must specify them by hand. If you have built the #
# server for ipv4 connections only, then specifying an empty bind #
# address binds the port to all ipv4 IP addresses, as expected. #
# #
<bind address="" port="6000" type="clients">
<bind address="" port="6660-6669" type="clients" ssl="gnutls">
# When linking servers, the openssl and gnutls transports are largely
# link-compatible and can be used alongside each other or either/or
# on each end of the link without any significant issues.
<bind address="" port="7000,7001" type="servers">
<bind address="1.2.3.4" port="7005" type="servers" transport="openssl">
#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
# #
# You can configure the passwords here which you wish to use for #
# the die and restart commands. Only trusted ircops who will #
# need this ability should know the die and restart password. #
# #
# Syntax is as follows: #
# <power diepass="die password" restartpass="restart password" #
# pause="secs before dying"> #
# #
<power diepass="" restartpass="" pause="2">
#-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# This optional tag allows you to include another config file #
# allowing you to keep your configuration tidy. The configuration #
# file you include will be treated as part of the configuration file #
# which includes it, in simple terms the inclusion is transparent. #
# #
# All paths to config files are relative to the directory of the main #
# config file inspircd.conf, unless the filename starts with a forward#
# slash (/) in which case it is treated as an absolute path. #
# #
# Syntax is as follows: #
#<include file="file.conf"> #
# #
#-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# This is where you can configure which connections are allowed #
# and denied access onto your server. The password is optional. #
# You may have as many of these as you require. To allow/deny all #
# connections, use a '*' or 0.0.0.0/0. #
# #
# Syntax is as follows: #
# #
# <connect allow="1.2.3.0/24" password="blahblah" #
# timeout="10" timeout="blah" flood="5" #
# threshold="8" pingfreq="120" sendq="99999" #
# revcq="696969" localmax="3" globalmax="3" #
# port="6660"> #
# #
# <connect deny="127.0.0.1" port="6667"> #
# #
# IP masks may be specified in CIDR format or wildcard format, #
# for IPV4 and IPV6. You *cannot* use hostnames in the allow or #
# deny field, as the state is applied before the user's DNS has #
# been resolved. #
# #
# You may optionally include timeout="x" on any allow line, which #
# specifies the amount of time given before an unknown connection #
# is closed if USER/NICK/PASS are not given. This value is in secs #
# #
# You should also include a flood="x" line which indicates #
# the number of lines a user may place into their buffer at once #
# before they are disconnected for excess flood. This feature can #
# not be disabled, however it can be set to extremely high values, #
# rendering it effectively disabled. A recommended value is 10. #
# A counter is maintained for each user which is reset every #
# 'threshold' seconds and specifying this threshold value with #
# threshold="X" indicates how often the counter is reset. For #
# example, with flood="5" and threshold="8", the user may not send #
# more than 5 lines in 8 secs. #
# #
# You may optionally specify the sendq size and ping frequency of #
# each connect:allow line using the pingfreq="X" and sendq="X" #
# settings as shown in the full example below. #
# The ping frequency is specified in seconds, and the sendq size #
# in bytes. It is recommended, although not enforced, that you #
# should never set your sendq size to less than 8k. Send Queues are #
# dynamically allocated and can grow as needed up to the maximum #
# size specified. #
# #
# The optional recvq value is the maximum size which users in this #
# group may grow their receive queue to. This is recommended to be #
# kept pretty low compared to the sendq, as users will always #
# receive more than they send in normal circumstances. The default #
# if not specified is 4096. #
# #
# The sendq is the data waiting to be sent TO THE USER. #
# The recvq is the data being received FROM THE USER. #
# The names sendq and recvq are from the SERVER'S PERSPECTIVE not #
# that of the user... Just to clear up any confusion or complaints #
# that these are backwards :p #
# #
# The localmax and globalmax values can be used to enforce local #
# and global session limits on connections. The session limits are #
# counted against all users, but applied only to users within the #
# class. For example, if you had a class 'A' which has a session #
# limit of 3, and a class 'B' which has a session limit of 5, and #
# somehow, two users managed to get into class B which also match #
# class A, there is only one connection left for this IP now in A, #
# but if they can connect again to B, there are three. You get the #
# idea (i hope). #
# #
# The optional port value determines which port the connect tag is #
# handling. If left out the connect tag covers all bound ports else #
# only incoming connections on the specified port will match. Port #
# tags may be used on connect allow and connect deny tags. #
# #
<connect allow="196.12.*" password="secret" port="6667">
<connect allow="*"
timeout="60"
flood="20"
threshold="1"
pingfreq="120"
sendq="262144"
recvq="8192"
localmax="3"
globalmax="3">
<connect deny="69.254.*">
<connect deny="3ffe::0/32">
#-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
# #
# Classes are a group of commands which are grouped together #
# and given a unique name. They used to define which commands #
# are available to certain types of Operators. #
# #
# Syntax is as follows: #
# #
# <class name="name" commands="oper commands"> #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# You are not forced to give these classes the names given below. #
# You can create your own named classes, if you want, in fact that #
# is the whole idea of this system! #
# #
# Note: It is possible to make a class which covers all available #
# commands. To do this, specify commands="*". This is not really #
# recommended, as it negates the whole purpose of the class system, #
# however it is provided for fast configuration (e.g. in test nets) #
# #
<class name="Shutdown" commands="DIE RESTART REHASH LOADMODULE UNLOADMODULE RELOAD">
<class name="ServerLink" commands="CONNECT SQUIT RCONNECT MKPASSWD MKSHA256">
<class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE ELINE">
<class name="OperChat" commands="WALLOPS GLOBOPS SETIDLE SPYLIST SPYNAMES">
<class name="HostCloak" commands="SETHOST SETIDENT SETNAME CHGHOST CHGIDENT">
#-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-#
# #
# This is where you specify which types of operators you have on #
# your server, as well as the commands they are allowed to use. #
# This works alongside with the classes specified above. #
# #
# type name - a name for the combined class types #
# a type name cannot contain spaces, however if you #
# put an _ symbol in the name, it will be translated #
# to a space when displayed in a WHOIS. #
# #
# classes - specified above, used for flexibility for the #
# server admin to decide on which operators get #
# what commands. Class names are case sensitive, #
# seperate multiple class names with spaces. #
# #
# host - optional hostmask operators will receive on oper-up. #
# #
# Syntax is as follows: #
# #
# <type name="name" classes="class names" host="oper hostmask"> #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# You are not forced to give these types the names given below. #
# You can create your own named types, if you want, in fact that #
# is the whole idea of this system! #
# #
<type name="NetAdmin" classes="OperChat BanControl HostCloak Shutdown ServerLink" host="netadmin.omega.org.za">
<type name="GlobalOp" classes="OperChat BanControl HostCloak ServerLink" host="ircop.omega.org.za">
<type name="Helper" classes="HostCloak" host="helper.omega.org.za">
#-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Opers are defined here. This is a very important section. #
# Remember to only make operators out of truthworthy people. #
# #
# name - oper name, This is case sensitive, so it is best to #
# use lower-case. #
# #
# password - password to oper-up, also case sensitive. #
# encryption is supported via modules. You may load #
# modules for MD5 or SHA256 encryption, and if you do, #
# this value will be a hash value, otherwise put a #
# plaintext password in this value. #
# #
# host - hosts of client allowed to oper-up. #
# wildcards accepted, seperate multiple hosts with a #
# space. You may also specify CIDR ip addresses. #
# #
# fingerprint - When using the m_ssl_oper_cert.so module, you may #
# specify a key fingerprint here. This can be obtained #
# using the /fingerprint command whilst the module is #
# loaded, or from the notice given to you when you #
# connect to the ircd using a client certificate, #
# and will lock this oper block to only the user who #
# has that specific key/certificate pair. #
# This enhances security a great deal, however it #
# requires that opers use clients which can send ssl #
# client certificates, if this is configured for that #
# oper. Note that if the m_ssl_oper.so module is not #
# loaded, and/or one of m_ssl_openssl or m_ssl_gnutls #
# is not loaded, this configuration option has no #
# effect and will be ignored. #
# #
# type - Defines the kind of operator. This must match a type #
# tag you defined above, and is case sensitive. #
# #
# Syntax is as follows: #
# <oper name="login" #
# password="pass" #
# host="hostmask@of.oper" #
# fingerprint="hexsequence" #
# type="oper type"> #
# #
<oper name="Brain"
password="s3cret"
host="ident@dialup15.isp.com *@localhost *@server.com *@3ffe::0/16"
type="NetAdmin">
#-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# Defines which servers can link to this one, and which servers this #
# server may create outbound links to. #
# #
# name - The name is the canocial name of the server, does #
# not have to resolve - but it is expected to be set #
# in the remote servers connection info. #
# #
# ipaddr - Valid host or ip address for remote server. These #
# hosts are resolved on rehash, and cached, if you #
# specify a hostname, so if you find that your server #
# is still trying to connect to an old IP after you #
# have updated your dns, try rehashing and then #
# attempting the connect again. #
# #
# port - The TCP port for the remote server. #
# #
# sendpass - Password to send to create an outbound connection #
# to this server. #
# #
# recvpass - Password to receive to accept an inbound connection #
# from this server. #
# #
# autoconnect - Sets the server to autoconnect. Where x is the num. #
# (optional) of seconds between attempts. e.g. 300 = 5 minutes. #
# #
# transport - If defined, this is a transport name implemented by #
# another module. Transports are layers on top of #
# plaintext connections, which alter them in certain #
# ways. Currently the three supported transports are #
# 'openssl' and 'gnutls' which are types of SSL #
# encryption, and 'zip' which is for compression. #
# If you define a transport, both ends of the #
# connection must use a compatible transport for the #
# link to succeed. OpenSSL and GnuTLS are link- #
# compatible with each other. #
# #
# hidden - When using m_spanningtree.so for linking. you may #
# set this to 'yes', and if you do, the IP address/ #
# hostname of this connection will NEVER be shown to #
# any opers on the network. In /STATS c its address #
# will show as *@<hidden>, and during CONNECT and #
# inbound connections, its IP will show as <hidden> #
# UNLESS the connection fails (e.g. due to a bad #
# password or servername) #
# #
# allowmask - When this is defined, it indicates a range of IP #
# addresses to allow for this link (You may use CIDR #
# or wildcard form for this address). #
# e.g. if your server is going to connect to you from #
# the range 1.2.3.1 through 1.2.3.255, put 1.2.3.0/24 #
# into this value. If it is not defined, then only #
# the ipaddr field of the server shall be allowed. #
# #
# failover - If you define this option, it must be the name of a #
# different link tag in your configuration. This #
# option causes the ircd to attempt a connection to #
# the failover link in the event that the connection #
# to this server fails. For example, you could define #
# two hub uplinks to a leaf server, and set an #
# american server to autoconnect, with a european #
# hub as its failover. In this situation, your ircd #
# will only try the link to the european hub if the #
# american hub is unreachable. NOTE that for the #
# intents and purposes of this option, an unreachable #
# server is one which DOES NOT ANSWER THE CONNECTION. #
# If the server answers the connection with accept(), #
# EVEN IF THE CREDENTIALS ARE INVALID, the failover #
# link will not be tried! Failover settings will also #
# apply to autoconnected servers as well as manually #
# connected ones. #
# #
# timeout - If this is defined, then outbound connections will #
# time out if they are not connected within this many #
# seconds. If this is not defined, the default of ten #
# seconds is used. #
# #
# bind - If you specify this value, then when creating an #
# outbound connection to the given server, the IP you #
# place here will be bound to. This is for multi- #
# homed servers which may have multiple IP addresses. #
# If you do not define this value, the first IP that #
# is not empty or localhost from your <bind> tags #
# will be bound to. This is usually acceptable, #
# however if your server has multiple network cards #
# then you may have to manually specify the bind #
# value instead of leaving it to automatic binding. #
# You can usually tell if you need to set this by #
# looking for the error 'Could not assign requested #
# address' in your log when connecting to servers. #
# #
# hidden - If this is set to true, yes, or 1, then the server #
# is completely hidden from non-opers. It does not #
# show in LINKS and it does not show in MAP. Also, #
# any servers which are child servers of this one #
# in the network will *also* be hidden. Use with #
# care! You can use this to 'mask off' sections of #
# the network so that users only see a small portion #
# of a much larger net. It should NOT be relied upon #
# as a security tool, unless it is being used for #
# example to hide a non-client hub, for which clients #
# do not have an IP address or resolvable hostname. #
# #
# to u:line a server (give it extra privilages required for running #
# services, Q, etc) you must include the <uline server> tag as shown #
# in the example below. You can have as many of these as you like. #
# #
# WARNING: Unlike other ircds, u:lining a server allows ALL users on #
# that server to operoverride modes. This should only be used for #
# services and protected oper servers! #
# #
# ------------------------------------------------------------------- #
# #
# NOTE: If you have built your server as an ipv6 server, then when a #
# DNS lookup of a server's host occurs, AAAA records (ipv6) are #
# priorotized over A records (ipv4). Therefore, if the server you are #
# connecting to has both an IPV6 ip address and an IPV4 ip address in #
# its DNS entry, the IPV6 address will *always* be selected. To #
# change this behaviour simply specify the IPV4 IP address rather #
# than the hostname of the server. #
# #
# ------------------------------------------------------------------- #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# If you want to link servers to InspIRCd you must load the #
# m_spanningtree module! Please see the modules list below for #
# information on how to load this module! If you do not load this #
# module, server links will NOT work! #
# #
# Also, if you define any transports, you must load the modules for #
# these transports BEFORE you load m_spanningtree, e.g. place them #
# above it in the configuration file. Currently this means the three #
# modules m_ssl_gnutls, m_ziplinks and m_ssl_openssl, depending on #
# which you choose to use. #
# #
<link name="hub.penguin.org"
ipaddr="penguin.box.com"
port="7000"
allowmask="69.58.44.0/24"
autoconnect="300"
failover="hub.other.net"
timeout="15"
transport="gnutls"
bind="1.2.3.4"
hidden="no"
sendpass="outgoing!password"
recvpass="incoming!password">
<link name="services.antarctic.com"
ipaddr="localhost"
port="7000"
allowmask="127.0.0.0/8"
sendpass="penguins"
recvpass="polarbears">
#-#-#-#-#-#-#-#-#-#-#-#- ULINES CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
# This tag defines a ulined server. A U-Lined server has special #
# permissions, and should be used with caution. Services servers are #
# usually u-lined in this manner. #
# #
# The 'silent' value if set to yes indicates that this server should #
# not generate quit and connect notices, which can cut down on noise #
# to opers on the network. #
# #
<uline server="services.antarctic.com" silent="yes">
#-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# These options let you define the path to your motd and rules #
# files. If these are relative paths, they are relative to the #
# configurtion directory. #
# #
<files motd="inspircd.motd"
rules="inspircd.rules">
#-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# This optional configuration tag lets you define the maximum number #
# of channels that both opers and users may be on at any one time. #
# the default is 20 for user and 60 for opers if this tag is not #
# defined. Remote users are not restricted in any manner. #
# #
<channels users="20"
opers="60">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Define your DNS server address here. InspIRCd has its own resolver. #
# If you do not define this value, the first dns server from your #
# /etc/resolv.conf file is read. If no entries are found in this file #
# or the file cannot be opened, the default value '127.0.0.1' is used #
# instead. The timeout value is in seconds. #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# When choosing a server, be sure to choose one which will do a #
# RECURSIVE LOOKUP. InspIRCd's resolver does not currently do these #
# recursive lookups itself, to save time and resources. The dns #
# server recommended by the InspIRCd team is bind, available from the #
# ISC website. If your DNS server does not do a recursive lookup, you #
# will be able to notice this by the fact that none of your users are #
# resolving even though the DNS server appears to be up! Most ISP and #
# hosting provider DNS servers support recursive lookups. #
# #
# ------------------------------------------------------------------- #
# #
# NOTE: if you have built InspIRCd with IPV6 support, then both #
# ipv6 and ipv4 addresses are allowed here, and also in the system #
# resolv.conf file. Remember that an ipv4 dns server can still #
# resolve ipv6 addresses, and vice versa. #
# #
<dns server="127.0.0.1" timeout="5">
# An example of using an IPV6 nameserver
#<dns server="::1" timeout="5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Define the path to the PID file here. The PID file can be used to #
# rehash the ircd from the shell or to terminate the ircd from the #
# shell using shell scripts, perl scripts etc, and to monitor the #
# ircd's state via cron jobs. If this is a relative path, it will be #
# relative to the configuration directory, and if it is not defined, #
# the default of 'inspircd.pid' is used. #
# #
#<pid file="/path/to/inspircd.pid">
#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Use these tags to customise the ban limits on a per channel basis. #
# the tags are read from top to bottom, and any tag found which #
# matches the channels name applies the banlimit to that channel. #
# It is advisable to put an entry with the channel as '*' at the #
# bottom of the list. If none are specified or no maxbans tag is #
# matched, the banlist size defaults to 64 entries. #
# #
<banlist chan="#morons" limit="128">
<banlist chan="*" limit="69">
#-#-#-#-#-#-#-#-#-#-#- DISABLED COMMANDS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# This tag is optional, and specifies one or more commands which are #
# not available to non-operators. For example you may wish to disable #
# NICK and prevent non-opers from changing their nicknames. #
# Note that any disabled commands take effect only after the user has #
# 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
# so for example disabling NICK will not cripple your network. #
# #
#<disabled commands="TOPIC MODE">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Just remove this... Its here to make you read ALL of the config #
# file options ;) #
<die value="You should probably edit your config *PROPERLY* and try again.">
#-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Settings to define which features are useable on your server. #
# #
# prefixquit - A prefix to be placed on the start of a client's #
# quit message #
# #
# suffixquit - A suffix to be placed on the end of a client's #
# quit message. #
# #
# fixedquit - A fixed quit message to display for all client #
# QUITS. If specified, overrides both prefixquit #
# and suffixquit options. #
# #
# loglevel - specifies what detail of messages to log in the #
# log file. You may select from debug, verbose, #
# default, sparse and none. #
# #
# allowhalfop - allows the +h channel mode #
# #
# noservices - If noservices is true, yes, or 1, then the first #
# user into a channel gets founder status. This is #
# only useful on networks running the m_chanprotect #
# module without services. #
# #
# qaprefixes - If qaprefixes is true, yes, or 1, then users #
# with +q or +a will get the ~ or & prefixes #
# used in unreal. This is only useful on networks #
# running the m_chanprotect module #
# #
# deprotectself - If this value is set to yes, true, or 1, then any #
# user with +q or +a may remove the +q or +a from #
# themselves. The default setting is to not enable #
# this feature, which stops even the founder taking #
# away their founder status without using services. #
# #
# deprotectothers-If this value is set to yes, true, or 1, then any #
# user with +q or +a may remove the +q or +a from #
# other users. The default setting is to not enable #
# this feature, so that only +q may remove +a, and #
# nothing but services may remove +q. #
# #
# cyclehosts - If this is set to true, yes or 1, then when a #
# user's hostname changes, they will appear to quit #
# and then rejoin with their new host. This prevents #
# clients from being confused by host changes, #
# especially in the case of bots, and it is #
# recommended that this option is enabled. #
# #
# netbuffersize - size of the buffer used to receive data from #
# clients. The ircd may only read() this amount #
# of text in one go at any time. (OPTIONAL) #
# #
# maxwho - The maximum number of results returned by a /WHO #
# query. This is to prevent /WHO being used as a #
# spam vector or means of flooding an ircd. The #
# default is 128, it is not recommended to raise it #
# above 1024. Values up to 65535 are permitted. #
# #
# somaxconn - The maximum number of sockets that may be waiting #
# in the accept queue. This usually allows the ircd #
# to soak up more connections in a shorter space of #
# time when increased but please be aware there is a #
# system defined maximum value to this, the same way #
# there is a system defined maximum number of file #
# descriptors. Some systems may only allow this to #
# be up to 5 (ugh) while others such as FreeBSD will #
# default to a much nicer 128. #
# #
# moduledir - This optional value indicates a runtime change of #
# the location where modules are to be found. This #
# does not add a supplementary directory. There can #
# only be one module path. #
# #
# softlimit - This optional feature allows a defined softlimit. #
# if defined sets a soft maxconnections value, has #
# to be less than the ./configure maxclients #
# #
# userstats - The userstats field is optional and specifies #
# which stats characters in /STATS may be requested #
# by non-operators. Stats characters in this field #
# are case sensitive and are allowed to users #
# independent of if they are in a module or the core #
# #
# operspywhois - If this is set then when an IRC operator uses #
# /WHOIS on a user they will see all channels, even #
# ones if channels are secret (+s), private (+p) or #
# if the target user is invisible +i. #
# #
# customversion - If you specify this configuration item, and it is #
# not set to an empty value, then when a user does #
# a /VERSION command on the ircd, this string will #
# be displayed as the second portion of the output, #
# replacing the system 'uname', compile flags and #
# socket engine/dns engine names. You may use this #
# to enhance security, or simply for vanity. #
# #
# maxtargets - The maxtargets field is optional, and if not #
# defined, defaults to 20. It indicates the maximum #
# number of targets which may be given to commands #
# such as PRIVMSG, KICK etc. #
# #
# hidesplits - When set to 'yes', will hide split server names #
# from non-opers. Non-opers will see '*.net *.split' #
# instead of the server names in the quit message, #
# identical to the way IRCu displays them. #
# #
# hidebans - When set to 'yes', will hide gline, kline, zline #
# and qline quit messages from non-opers. For #
# example, user A who is not an oper will just see #
# (G-Lined) while user B who is an oper will see the #
# text (G-Lined: Reason here) instead. #
# #
# hidewhois - When defined with a non-empty value, the given #
# text will be used in place of the user's server #
# in WHOIS, when a user is WHOISed by a non-oper. #
# For example, most nets will want to set this to #
# something like '*.netname.net' to conceal the #
# actual server the user is on. #
# #
# flatlinks - When you are using m_spanningtree.so, and this #
# value is set to true, yes or 1, /MAP and /LINKS #
# will be flattened when shown to a non-oper. #
# #
# hideulines - When you are using m_spanningtree.so, and this #
# value is set to true, yes or 1, then U-lined #
# servers will be hidden in /LINKS and /MAP. For non #
# opers. Please be aware that this will also hide #
# any leaf servers of a U-lined server, e.g. jupes. #
# #
# nouserdns - If set to 'yes', 'true' or '1', no user dns #
# lookups will be performed for connecting users. #
# this can save a lot of resources on very busy irc #
# servers. #
# #
# syntaxhints - If set to 'yes', 'true' or '1', when a user does #
# not give enough parameters for a command, a syntax #
# hint will be given (using the RPL_TEXT numeric) #
# as well as the standard ERR_NEEDMOREPARAMS. #
# #
# announcets - If this value is defined to 'yes', 'true' or '1', #
# then if a channel's timestamp is updated the users #
# on the channel will be informed of the change via #
# a server notice to the channel with the old and #
# new TS values in the timestamp. If you think this #
# is just pointless noise, define the value to 0. #
# #
# ircumsgprefix - Use undernet style message prefix for channel #
# NOTICE and PRIVMSG adding the prefix to the line #
# of text sent out. Eg. NOTICE @#test :@ testing #
# vs. the off setting: NOTICE @#test :testing #
# #
# hostintopic - If this is set to yes (the default) then the full #
# nick!user@host is shown for who set a TOPIC last. #
# if set to no, then only the nickname is shown. #
# #
# announceinvites #
# - If this option is set to yes (the default), then #
# invites are announced to the channel when a user #
# invites annother user. If you consider this to be #
# unnecessary noise, explicitly set this to no. #
# #
# disablehmac - If you are linking your InspIRCd to older versions #
# then you can specify this option and set it to #
# yes. 1.1.6 and above support HMAC and challenge- #
# response for password authentication. These can #
# greatly enhance security of your server to server #
# connections when you are not using SSL (as is the #
# case with a lot of larger networks). Linking to #
# older versions of InspIRCd should not *usually* be #
# a problem, but if you have problems with HMAC #
# authentication, this option can be used to turn it #
# off. #
# #
# hidemodes - If this option is enabled, then the listmodes #
# given (e.g. +eI), will be hidden from users below #
# halfop. This is not recommended to be set on mode #
# +b, as it may break some features in popular #
# clients such as mIRC. #
# #
# quietbursts - When synching or splitting from the network, a #
# server can generate a lot of connect and quit #
# snotices to the +C and +Q snomasks. Setting this #
# value to yes squelches those messages, which can #
# make them more useful for opers, however it will #
# degrade their use by certain third party programs #
# such as BOPM which rely on them to scan users when #
# a split heals in certain configurations. #
# #
<options prefixquit="Quit: "
loglevel="default"
netbuffersize="10240"
maxwho="128"
noservices="no"
qaprefixes="no"
deprotectself="no"
deprotectothers="no"
somaxconn="128"
softlimit="12800"
userstats="Pu"
operspywhois="no"
customversion=""
maxtargets="20"
hidesplits="no"
hidebans="no"
hidewhois=""
flatlinks="no"
hideulines="no"
nouserdns="no"
syntaxhints="no"
cyclehosts="yes"
ircumsgprefix="no"
announcets="yes"
disablehmac="no"
hostintopic="yes"
hidemodes="eI"
quietbursts="yes"
allowhalfop="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#- TIME SYNC OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#
# Time sychronization options for m_spanningtree linking. #
# #
# Because IRC is very time and clock dependent, InspIRCd provides its #
# own methods for syncronization of time between servers as shown #
# in the example below, for servers that don't have ntpd running. #
# #
# enable - If this value is 'yes', 'true', or '1', time #
# synchronization is enabled on this server. This #
# means any servers you are linked to will #
# automatically synchronize time, however you should #
# use ntpd instead where possible, NOT this option. #
# #
# master - If this value is set to yes, then this server will #
# act as the authoritative time source for the whole #
# network. All other servers will respect its time #
# without question, and match their times to it. #
# only one server should have the master value set #
# to 'yes'. #
# #
<timesync enable="no" master="no">
#-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# This tag lets you define the behaviour of the /whowas command of #
# your server. #
# #
# groupsize - Controls the maximum entries per nick shown when #
# performing a /whowas nick. Setting this to 0 dis- #
# ables whowas completely. #
# #
# maxgroups - The maximum number of nickgroups that can be added #
# to the list. If max is reached, oldest group will #
# be deleted first like a FIFO. A groupsize of 3 and #
# a maxgroups of 5000 will allow for 5000 nicks to #
# be stored with a history of 3, thus giving a total #
# of 3 * 5000 = 15000 entries. A setting of 0 dis- #
# ables whowas completely. #
# #
# maxkeep - The maximum time a nick is kept in the whowas list #
# before being pruned. Time may be specified in #
# seconds, or in the following format: 1y2w3d4h5m6s #
# meaning one year, two weeks, three days, 4 hours, #
# 5 minutes and 6 seconds. All fields in this format #
# are optional. Minimum is 1 hour, if less InspIRCd #
# will default back to 1 hour. #
# #
#<whowas groupsize="10" #
# maxgroups="100000" #
# maxkeep="3d"> #
#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# These tags define which modules will be loaded on startup by your #
# server. Add modules without any paths. When you make your ircd #
# using the 'make' command, all compiled modules will be moved into #
# the folder you specified when you ran ./configure. The module tag #
# automatically looks for modules in this location. #
# If you attempt to load a module outside of this location, either #
# in the config, or via /LOADMODULE, you will receive an error. #
# #
# By default, ALL modules are commented out. You must uncomment them #
# or add lines to your config to load modules. Please refer to #
# http://www.inspircd.org/wiki/Modules_List for a list of modules and#
# each modules link for any additional conf tags they require. #
# #
# You may use wildcards in a <module> tag to load all modules which #
# match a glob pattern (e.g. m_sa????.so would load m_sajoin, #
# m_sapart, m_saquit and m_sanick) #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# To link servers to InspIRCd, you MUST load the m_spanningtree #
# module, as shown below. If you DO NOT do this, server links will #
# NOT work at all. ie. The ports will NOT bind, and /connect will not #
# work properly. This is by design, to allow for the implementation #
# of other linking protocols in modules in the future. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Spanning Tree module - allows linking of servers using the spanning
# tree protocol (see the READ THIS BIT section above).
#
#<module name="m_spanningtree.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MD5 Module - Allows other modules to generate MD5 hashes, usually for
# cryptographic uses and security.
#
# IMPORTANT:
# Other modules such as m_cloaking.so and m_opermd5.so may rely on
# this module being loaded to function.
#
#<module name="m_md5.so">
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SHA256 Module - Allows other modules to generate SHA256 hashes,
# usually for cryptographic uses and security.
#
# IMPORTANT:
# Other modules such as m_opermd5.so may rely on this module being
# loaded to function.
#
#<module name="m_sha256.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alias module: Allows you to define server-side command aliases
#<module name="m_alias.so">
#
#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_alias.so module loaded, you may also define #
# aliases as shown below. They are commonly used to provide shortcut #
# commands to services, however they are not limited to just this use.#
# An alias tag requires the following values to be defined in it: #
# #
# text - The text to detect as the actual command line, #
# Cant contain spaces, but case insensitive. #
# You may have multiple aliases with the same #
# command name (text="" value), however the first #
# found will be executed if its format value is #
# matched, or it has no format value. Aliases are #
# read from the top of the file to the bottom. #
# #
# format - If this is defined, the parameters of the alias #
# must match this glob pattern. For example if you #
# want the first parameter to start with a # for #
# the alias to be executed, set format="#*" in the #
# alias definition. Note that the :'s which are #
# part of IRC formatted lines will be preserved #
# for matching of this text. This value is #
# optional. #
# #
# replace - The text to replace 'text' with. Usually this #
# will be "PRIVMSG ServiceName :$2-" or similar. #
# You may use the variables $1 through $9 in the #
# replace string, which refer to the first through #
# ninth word in the original string typed by the #
# user. You may also use $1- through $9- which #
# refer to the first word onwards, through to the #
# ninth word onwards, e.g. if the user types the #
# command "foo bar baz qux quz" then $3- will hold #
# "baz qux quz" and $2 will contain "bar". You may #
# also use the special variables: $nick, $ident, #
# $host and $vhost, and you may seperate multiple #
# commands with \n. If you wish to use the ACTUAL #
# characters \ and n together in a line, you must #
# use the sequence "\\n". #
# #
# requires - If you provide a value for 'requires' this means #
# the given nickname MUST be online for the alias #
# to successfully trigger. If they are not, then #
# the user receives a 'no such nick' 401 numeric. #
# #
# uline - Defining this value with 'yes', 'true' or '1' #
# will ensure that the user given in 'requires' #
# must also be on a u-lined server, as well as #
# actually being on the network. If the user is #
# online, but not on a u-lined server, then an #
# oper-alert is sent out as this is possibly signs #
# of a user trying to impersonate a service. #
# #
# operonly - Defining this value, with a value of 'yes', '1' #
# or true will make the alias oper only. If a non- #
# oper attempts to use the alias, it will appear #
# to not exist. #
# #
#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
#
# An example of using the format value to create an alias with two
# different behaviours depending on the format of the parameters.
#
#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
# requires="ChanServ" uline="yes">
#
#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
# requires="NickServ" uline="yes">
#
# This alias fixes a glitch in xchat 2.6.x and above and the way it
# assumes IDENTIFY must be prefixed by a colon (:) character. It should
# be placed ABOVE the default NICKSERV alias (the first example) listed
# above.
#
#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
# requires="NickServ" uline="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alltime module: Shows time on all connected servers at once
#<module name="m_alltime.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Antibear security module: Prevents 'bear.txt' based trojans from
# connecting to your network by sending them a numeric they can't handle.
#<module name="m_antibear.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Antibottler module: Labels bottler leech bots
#<module name="m_antibottler.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Auditorium module: Adds channel mode +u which makes everyone else
# except you in the channel invisible, used for large meetings etc.
#<module name="m_auditorium.so">
#
# Auditorium settings:
#
#<auditorium showops="no">
#
# Setting this value to yes makes m_auditorium behave like unrealircd
# +u channel mode, e.g. ops see users joining, parting, etc, and users
# joining the channel see the ops. Without this flag, the mode acts
# like ircnet's +a (anonymous channels), showing only the user in the
# names list, and not even showing the ops in the list, or showing the
# ops that the user has joined.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ban except module: Adds support for channel ban exceptions (+e)
#<module name="m_banexception.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ban redirection module: Allows bans which redirect to a specified
# channel. e.g. +b nick!ident@host#channelbanneduserissentto
#<module name="m_banredirect.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block amsg module: Attempt to block all usage of /amsg and /ame
#<module name="m_blockamsg.so">
#
#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_blockamsg.so module loaded, you can configure it #
# with the <blockamsg> tag: #
# #
# delay - How many seconds between two messages to force #
# them to be recognised as unrelated. #
# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
# or 'killopers'. Define how to take action when #
# a user uses /amsg or /ame. #
#
#<blockamsg delay="3" action="killopers">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block CAPS module: Blocking all-CAPS messages with cmode +P
#<module name="m_blockcaps.so">
# #
#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# percent - How many percent of text must be caps before text #
# will be blocked. #
# #
# minlen - The minimum length a line must be for the block #
# percent to have any effect. #
# #
# capsmap - A list of chars to be considered CAPS, this was #
# you can add CAPS for your language. Also you can #
# add things like ! and space to further lock down #
# on caps usage. #
#<blockcaps percent="50"
# minlen="5"
# capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block colour module: Blocking colour-coded messages with cmode +c
#<module name="m_blockcolor.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Botmode module: Adds the user mode +B
#<module name="m_botmode.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CBAN module: Lets you disallow channels from being used at runtime.
#<module name="m_cban.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Censor module: Adds the channel mode +G
#<module name="m_censor.so">
#
#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_censor module, then you must #
# specify some censor tags. See also: #
# http://www.inspircd.org/wiki/Censor_Module #
#
#<include file="censor.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
# (http://cgiirc.sourceforge.net).
#<module name="m_cgiirc.so">
#
#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#
# Optional - If you specify to use m_cgiirc, then you must specify one
# or more cgihost tags which indicate authorized CGI:IRC servers which
# will be connecting to your network, and an optional cgiirc tag.
# For more information see: http://www.inspircd.org/wiki/CGI-IRC_Module
#
# Set to yes if you want to notice opers when CGI clients connect
# <cgiirc opernotice="no">
#
# The type field indicates where the module should get the real
# client's IP address from, for further information, please see the
# CGI:IRC documentation.
#
# <cgihost type="pass" mask="www.mysite.com"> # Get IP from PASS
# <cgihost type="webirc" mask="somebox.mysite.com"> # Get IP from WEBIRC
# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
# <cgihost type="passfirst" mask="www.mysite.com"> # See the docs
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel create module: Adds snomask +j, which will notify opers of
# any new channels that are created
#<module name="m_chancreate.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel filter module: Allows channel-op defined message
# filtering using simple string matches (channel mode +g)
#<module name="m_chanfilter.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Chanprotect module: gives +q and +a channel modes
#<module name="m_chanprotect.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGHOST module: Adds the /CHGHOST command
#<module name="m_chghost.so">
#
#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-#
# Optional - If you want to use special chars for hostnames you can #
# specify your own custom list of chars with the <hostname> tag: #
# #
# charmap - A list of chars accepted as valid by the /CHGHOST #
# and /SETHOST commands. Also note that the list is #
# case-sensitive. #
#<hostname charmap="abcdefghijklmnopqrstuvwxyz.-_/0123456789">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGIDENT module: Adds the /CHGIDENT command
#<module name="m_chgident.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Cloaking module: Adds usermode +x and cloaking support.
# Relies on the module m_md5.so being loaded before m_cloaking.so in
# the configuration file.
#<module name="m_cloaking.so">
#
#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify the m_cloaking.so module as above, you #
# must define cloak keys, and optionally a cloak prefix as shown #
# below. When using cloaking, the cloak keys are MANDITORY and must #
# be included. However, if prefix is not included, it will default #
# to your networks name from the <server> tag. #
# #
# <cloak key1="0x2AF39F40" #
# key2="0x78E10B32" #
# key3="0x4F2D2E82" #
# key4="0x043A4C81" #
# prefix="mynet"> #
# #
# Please note that the key values will accept any number, and should #
# be large numbers. Using small numbers such as "7" or "1924" will #
# seriously weaken the security of your cloak. It is recommended you #
# use hexdecimal numbers prefixed by "0x", as shown in this example, #
# with each key eight hex digits long. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Clones module: Adds an oper command /CLONES for detecting cloned
# users. Warning: This module may be resource intensive when its
# command is issued, use with care.
#<module name="m_clones.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Join: Allows you to force users to join one or more channels
# automatically upon connecting to the server.
#<module name="m_conn_join.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
# If you have m_conn_join.so loaded, you can configure it using the
# follow values:
#
#<autojoin channel="#one,#two,#three">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Lusers: Shows the LUSERS output on connect
#<module name="m_conn_lusers.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Usermodes: Set modes on users when they connect
# When this module is loaded <connect:allow> tags may have an optional
# modes="" value, which contains modes to add or remove from users
# when they connect to the server.
#<module name="m_conn_umodes.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Wait-for-Pong: Don't let a user connect until they PONG
#<module name="m_conn_waitpong.so">
#
#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_conn_waitpong.so module loaded, configure it with #
# the <waitpong> tag: #
# #
# sendsnotice - Whether to send a snotice on connect, like other #
# older ircds #
# #
# killonbadreply - Whether to kill the user if they send the wrong #
# PONG reply. #
# #
#<waitpong sendsnotice="yes" killonbadreply="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connection throttle module. Configuration:
#<module name="m_connflood.so">
#
#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# seconds, maxconns - Amount of connections per <seconds>.
#
# timeout - Time to wait after the throttle was activated
# before deactivating it. Be aware that the time
# is seconds + timeout.
#
# quitmsg - The message that users get if they attempt to
# connect while the throttle is active.
#
# bootwait - Amount of time to wait before enforcing the
# throttling when the server just booted.
#
#<connflood seconds="30" maxconns="3" timeout="30"
# quitmsg="Throttled" bootwait="10">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DCCALLOW module: Adds the /DCCALLOW command
#<module name="m_dccallow.so">
#
#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# blockchat - Whether to block DCC CHAT as well as DCC SEND
# length - Default duration of entries in DCCALLOW list
# action - Default action to take if no action is specified
# can be 'block' or 'allow'
#
# File configuration:
# pattern - The glob pattern to match against
# action - Action to take if a user attempts to send a file
# that matches this pattern, can be 'block' or 'allow'
#
#<dccallow blockchat="yes" length="5m" action="block">
#<banfile pattern="*.exe" action="block">
#<banfile pattern="*.txt" action="allow">
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deaf module: adds support for ircu style usermode +d - deaf to
# channel messages and channel notices.
#<module name="m_deaf.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deny Channels: Deny Channels from being used by users
#<module name="m_denychans.so">
#
#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_denychans.so module loaded, you need to specify #
# the channels to deny: #
# #
# name - The channel name to deny. #
# #
# allowopers - If operators are allowed to override the deny. #
# #
# reason - Reason given for the deny. #
# #
#<badchan name="#gods" allowopers="yes" reason="Tortoises!">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Devoice Module: Let users devoice themselves.
#<module name="m_devoice.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DNS Blacklist Module: Provides support for looking up IPs on one or #
# more blacklists. #
#<module name="m_dnsbl.so"> #
# #
# For configuration options please see the wiki page for m_dnsbl at #
# http://inspircd.org/wiki/DNS_Blacklist_Module #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides glob-based message filtering
#<module name="m_filter.so">
# OR
# PCRE filter module: Filters messages using regular expressions
#<module name="m_filter_pcre.so">
#
# You may only use one or the other with these modules, network-wide.
#
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_filter or m_filter_pcre #
# modules, then specfiy below the path to the filter.conf file, #
# or define some <filter> tags. #
# #
#<include file="filter.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Foobar module: does nothing - historical relic
#<module name="m_foobar.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Globops module: gives /GLOBOPS and usermode +g
#<module name="m_globops.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Global load module: Allows loading and unloading of modules network-
# wide (USE WITH EXTREME CAUTION!)
#<module name="m_globalload.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HELPOP module: Provides the /HELPOP command
#<module name="m_helpop.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_helpop.so module, then #
# specify below the path to the helpop.conf file, or if you like to #
# make a mess, define your helpop tags in this conf. #
# #
#<include file="helpop.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HIDECHANS module: Allows opers to hide their channels list from non-
# opers by setting user mode +I on themselves.
# <module name="m_hidechans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HIDEOPER module: Allows opers to hide their oper status from non-
# opers by setting user mode +H on themselves.
# <module name="m_hideoper.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hostchange module: Allows a different style of cloaking
#<module name="m_hostchange.so">
#
#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you choose to use the m_hostchange.so module. #
# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module #
# #
#<host suffix="polarbears.org">
#<hostchange mask="*@fbi.gov" action="addnick">
#<hostchange mask="*r00t@*" action="suffix">
#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# httpd module: Provides http server support for InspIRCd
#<module name="m_httpd.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
# Optional - If you choose to use the m_httpd.so module, then you must
# specify the port number and other details of your http server:
#
#<http ip="192.168.1.10" host="brainwave" port="32006"
# index="/home/brain/inspircd/http/index.html">
#
# You may have as many of these tags as you wish, each with a different
# IP, port, host or index file. Each one will act as an independent
# HTTP server.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# http stats module: Provides basic stats pages over HTTP
# Requires m_httpd.so to be loaded for it to function.
#<module name="m_httpd_stats.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
#
#<httpstats stylesheet="http://remote.style/sheet.css">
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ident: Provides RFC 1413 ident lookup support
#<module name="m_ident.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you are using the m_ident.so module, then you can #
# specify the timeout for ident lookups here. If not defined, it will #
# default to one second. This is a non-blocking timeout which holds #
# the user in a 'connecting' state until the lookup is complete. #
# #
#<ident timeout="5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invite except module: Adds support for channel invite exceptions (+I)
#<module name="m_inviteexception.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invisible module - Adds support for usermode +Q (quiet) which lets an
# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that
# opers are still able to see invisible users, and if an oper with +Q
# deopers, they will become visible.
#
# IMPORTANT NOTE: To allow this mode to be used by a type of oper, you
# must first add the value canquiet="yes" to that oper's type tag.
#
#<module name="m_invisible.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Join flood module: Adds support for join flood protection (+j)
#<module name="m_joinflood.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Jump Server module: Adds support for the RPL_REDIR numeric
#<module name="m_jumpserver.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
#<module name="m_kicknorejoin.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Knock module: adds the /KNOCK command and +K channel mode
#<module name="m_knock.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is #
# used to temporarily close/open for new connections to the server. #
# These commands require OPER status and that the LOCKSERV UNLOCKSERV #
# are specified in a <class> tag that the oper is part of. This is so #
# you can control who has access to this possible dangerous command. #
# If your server is locked and you got disconnected, do a REHASH from #
# shell to open up again.
#<module name="m_lockserv.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Msg flood module: Adds message/notice flood protection (+f)
#<module name="m_messageflood.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MySQL module: Allows other SQL modules to access MySQL databases
# through a unified API. You must copy the source for this module
# from the directory src/modules/extra, plus the file m_sqlv2.h
#<module name="m_mysql.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_mysql.so is more complex than described here, see the wiki for #
# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
#
#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# NAMESX module: Provides support for the NAMESX extension which allows
# clients to see all the prefixes set on a user without getting confused.
# This is supported by mIRC, x-chat, klient, and maybe more.
#<module name="m_namesx.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nicklock module: Let opers change a user's nick and then stop that
# user from changing their nick again.
#<module name="m_nicklock.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No ctcp module: Adds the channel mode +C to block CTCPs
#<module name="m_noctcp.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Noinvite module: Gives channel mode +V
#<module name="m_noinvite.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No kicks module: Adds the +Q channel mode
#<module name="m_nokicks.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No nicks module: Adds the +N channel mode
#<module name="m_nonicks.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No Notice module: adds the channel mode +T
#<module name="m_nonotice.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper channels mode: Adds the +O channel mode
#<module name="m_operchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper hash module: Allows hashed oper passwords
# Relies on the module m_md5.so and/or m_sha256.so being loaded before
# m_oper_hash.so in the configuration file.
#<module name="m_oper_hash.so">
#
#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#
# To use this module, you must define a hash type for each oper's
# password you want to hash. For example:
#
# <oper name="Brain"
# host="ident@dialup15.isp.com"
# hash="sha256"
# password="a41d730937a53b79f788c0ab13e9e1d5"
# type="NetAdmin">
#
# The types of hashing available vary depending on which hashing modules
# you load, but usually if you load m_sha256.so and m_md5.so, both md5
# and sha256 type hashing will be available (the most secure of which
# is SHA256).
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper Join module: Forces opers to join a channel on oper-up
#<module name="m_operjoin.so">
#
#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# If you are using the m_operjoin.so module, specify the channel here #
# #
#<operjoin channel="#channel">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper MOTD module: Provides support for seperate message of the day
# on oper-up
#<module name="m_opermotd.so">
#
#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# If you are using the m_opermotd.so module, specify the motd here #
# #
#<opermotd file="oper.motd">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Override module: Adds support for oper override
#<module name="m_override.so">
#
#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# m_override.so is too complex it describe here, see the wiki: #
# http://www.inspircd.org/wiki/Oper_Override_Module #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper levels module: Gives each oper a level and prevents
# actions being taken against higher level opers
# Specify the level as the 'level' parameter of the <type> tag
#<module name="m_operlevels.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper modes module: Allows you to specify modes to add/remove on oper
# Specify the modes as the 'modes' parameter of the <type> tag
#<module name="m_opermodes.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# PostgreSQL module: Allows other SQL modules to access PgSQL databases
# through a unified API. You must copy the source for this module
# from the directory src/modules/extra, plus the file m_sqlv2.h
#<module name="m_pgsql.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_pgsql.so is more complex than described here, see the wiki for #
# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
#
#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Random Quote module: provides a random quote on connect.
# NOTE: Some of these may mimic fatal errors and confuse users and
# opers alike! - BEWARE!
#<module name="m_randquote.so">
#
#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_randquote.so module, then #
# specify below the path to the randquotes.conf file. #
# #
#<randquote file="randquotes.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Redirect module: Adds channel redirection (mode +L)
#<module name="m_redirect.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remove module: Adds the /REMOVE command which is a peaceful
# alternative to /KICK
#<module name="m_remove.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restrict banned users module:
# Disallows banned users on a channel from messaging the channel,
# changing nick, or changing the topic, if loaded.
#<module name="m_restrictbanned.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restricted channels module: Allows only opers to create channels
#<module name="m_restrictchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restrict message module: Allows users to only message opers
#<module name="m_restrictmsg.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Provide /LIST throttling (to prevent flooding) and /LIST safety to
# prevent excess flood when the list is large.
#<module name="m_safelist.so">
#
#-#-#-#-#-#-#-#-#-#-# SAFELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
#
# When using Safelist, you may set the following values;
#
# The first value, 'throttle', sets the amount of time in seconds a user
# must wait between LIST commands. For example, if this is set to 60
# (the default) then the user may not /LIST more than once a minute.
# If not defined, the default value is 60 seconds.
#
# The second value, 'maxlisters', indicates the maximum number of users
# which may be retrieving a LIST at once. It is not recommended you raise
# this value, as increasing it too high can make your network vulnerable
# to floodbots which waste your bandwidth and CPU time with LIST requests.
#
#<safelist throttle="60" maxlisters="50">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAJOIN module: Adds the /SAJOIN command
#<module name="m_sajoin.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAMODE module: Adds the oper /SAMODE command
#<module name="m_samode.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SANICK module: Allows opers to change user's nicks
#<module name="m_sanick.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAPART module: Adds the oper /SAPART command
#<module name="m_sapart.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
#<module name="m_saquit.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Secure list module: Prevent /LIST in the first minute of connection,
# crippling most spambots and trojan spreader bots.
#<module name="m_securelist.so">
#
#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Securelist can be harmful to some irc search engines such as #
# netsplit.de and searchirc.com. To prevent securelist blocking these #
# sites from listing, define exception tags as shown below: #
<securelist exception="*@*.searchirc.org">
<securelist exception="*@*.netsplit.de">
<securelist exception="*@echo940.server4you.de">
# #
# Define the following variable to change how long a user must wait #
# before issuing a LIST. If not defined, defaults to 60 seconds. #
# #
#<securelist waittime="60"> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# See nicks module: Allow for SNOMASK +N which shows nick changes.
#<module name="m_seenicks.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Set Idle module: Adds a command for opers to change their
# idle time (mainly a toy)
#<module name="m_setidle.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Services support module: Adds several usermodes such as +R and +M
# this module implements the 'identified' state via user mode +r, which
# is similar to the DALnet and dreamforge systems.
#<module name="m_services.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Services support module: Adds several usermodes such as +R and +M
# this module implements the 'identified' state via account names (AC)
# and is similar in operation to the way asuka and ircu handle services.
# it cannot be used at the same time as m_services, above.
#<module name="m_services_account.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Sethost module: Adds the /SETHOST command
# See m_chghost for how to customise valid chars for hostnames
#<module name="m_sethost.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Setident module: Adds the /SETIDENT command
#<module name="m_setident.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SETNAME module: Adds the /SETNAME command
#<module name="m_setname.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Show Whois module: Adds the +W usermode which allows opers
# to see when they are whois'ed (can be annoying).
#<module name="m_showwhois.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Spy module: Adds the commands SPYLIST and SPYNAMES that let opers
# see who is in a +s channel, and list +s channels, show keys of keyed
# channels the oper is not a member of etc. (standard 'abusive' features
# of many other ircds, modulized here in InspIRCd).
#<module name="m_spy.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL channel mode module: Adds support for SSL-only channels (+z).
# does not do anything useful without a working SSL module (see below)
#<module name="m_sslmodes.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Dummy ssl module: If you have other servers on your network which
# have SSL, but your server does not have ssl enabled, you should load
# this module, which will handle SSL metadata (e.g. the "Is using ssl"
# field in the WHOIS information).
#<module name="m_ssl_dummy.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
# if enabled. You must copy the source for this module from the directory
# src/modules/extra, or answer 'yes' in ./configure when asked if you
# want to enable this, or it will not load.
#<module name="m_ssl_gnutls.so">
#
#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_ssl_gnutls.so is too complex it describe here, see the wiki: #
# http://www.inspircd.org/wiki/GnuTLS_SSL_Module #
# #
# NOTE: If you want to use this module to encrypt and sign your #
# server to server traffic, you MUST load it before m_spanningtree in #
# your configuration file! #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL Info module: Allows users to retrieve information about other
# user's peer SSL certificates and keys. This can be used by client
# scripts to validate users. For this to work, one of m_ssl_gnutls.so
# or m_ssl_openssl.so must be loaded. You must symlink the source for
# this module from the directory src/modules/extra.
#<module name="m_sslinfo.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
# if enabled. You must copy the source for this module from the directory
# src/modules/extra, or answer 'yes' in ./configure when asked if you
# want to enable this, or it will not load.
#<module name="m_ssl_openssl.so">
#
#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_ssl_openssl.so is too complex it describe here, see the wiki: #
# http://www.inspircd.org/wiki/OpenSSL_SSL_Module #
# #
# NOTE: If you want to use this module to encrypt and sign your #
# server to server traffic, you MUST load it before m_spanningtree in #
# your configuration file! #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL Cert Oper module: Allows opers to oper up using the key fingerprint
# stored within their SSL certificate and key pair.
# When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must
# be loaded. An extra value should be added to enabled opers, which
# is in the following format: fingerprint="<hash>". For more information,
# see the example in the oper blocks.
#<module name="m_ssl_oper_cert.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Strip colour module: Adds the channel mode +S
#<module name="m_stripcolor.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SILENCE module: Adds support for /SILENCE
#<module name="m_silence.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Extended SILENCE module: Adds support for /SILENCE with additional
# features to silence based on invites, channel messages, etc.
#<module name="m_silence_ext.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQLite3 module: Allows other SQL modules to access SQLite3 #
# databases through a unified API. You must link the source for this #
# module from the directory src/modules/extra to src/modules, plus #
# the file m_sqlv2.h #
#<module name="m_sqlite3.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_sqlite.so is more complex than described here, see the wiki for #
# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module #
#
#<database hostname="/full/path/to/database.db" id="anytext">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQLutils module: Provides some utilities to SQL client modules, such
# as mapping queries to users and channels. You must copy the source
# for this module from the directory src/modules/extra/m_sqlutils.cpp
# and src/modules/extra/m_sqlutils.h into /src/modules
# Needed for, and loaded before: SQLauth and SQLoper
#<module name="m_sqlutils.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL authentication module: Allows IRCd connections to be tied into
# a database table (for example a forum). You must copy the source for
# this module from the directory src/modules/extra
# Depends on the SQLutils module being loaded first.
#<module name="m_sqlauth.so">
#
#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# m_sqlauth.so is too complex it describe here, see the wiki: #
# http://www.inspircd.org/wiki/SQL_Authentication_Module #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL logging module: Allows you to log network-wide data for your
# network in a fully normalized set of SQL tables. You must copy the
# source for this module from the directory src/modules/extra
#<module name="m_sqllog.so">
#
#-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# dbid - Database ID to use (see m_sql) #
# #
# See also: http://www.inspircd.org/wiki/SQL_Logging_Module #
# #
#<sqllog dbid="1">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL oper module: Allows you to store oper credentials in an SQL table
# You must copy the source for this module from the directory src/modules/extra
# Depends on the SQLutils module being loaded first.
#<module name="m_sqloper.so">
#
#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# dbid - Database ID to use (see m_sql) #
# #
# See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module #
# #
#<sqloper dbid="1">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be #
# added/removed by Services. #
#<module name="m_svshold.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SWHOIS module: Allows you to add arbitary lines to user WHOIS.
#<module name="m_swhois.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Test command module: Does nothing significant. Read: pointless.
#<module name="m_testcommand.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Timed bans module: Adds timed bans and the /TBAN command
#<module name="m_timedbans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Test line module: Adds the /TLINE command, used to test how many
# users a /GLINE or /ZLINE etc would match.
#<module name="m_tline.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Uninvite module: Adds the /UNINVITE command which lets users remove
# pending invites from channels without waiting for the user to join.
#<module name="m_uninvite.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Userip module: Adds the /USERIP command
#<module name="m_userip.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Vhost module: Adds the VHOST command which allows for adding virtual
# hosts which are accessible using a username and password in the config.
#<module name="m_vhost.so">
#
#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# user - Username for the vhost. #
# #
# pass - Password for the vhost. #
# #
# host - Vhost to set. #
#
#<vhost user="some_username" pass="some_password" host="some.host">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Watch module: Adds the WATCH command, which is used by clients to
# maintain notify lists.
#<module name="m_watch.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# ZipLinks module: Adds support for zlib deflate on server to server
# connections. Both ends of the connection must load this module.
#
#<module name="m_ziplink.so">
#
# To use this module, you must enable it as a transport type in your
# <link> tags or <bind> tags using the transport name 'zip'.
# See the documentation of <link> and <bind>, respectively.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# The ban tags define nick masks, host masks and ip ranges which are #
# banned from your server. All details in these tags are local to #
# Your server. #
# #
# #
# badip lines ban an ip range (same as a zline) #
# #
# ipmask - The ip range to ban (wildcards possible) #
# CIDR is supported in the IP mask. #
# reason - Reason to display when disconnected #
# #
# badnick lines ban a nick mask (same as a qline) #
# #
# nick - Nick mask to ban (wildcards possible) #
# reason - Reason to display on /NICK #
# #
# badhost lines ban a user@host mask (same as a kline) #
# #
# host - ident@hostname (wildcards possible) #
# If you specify an IP, CIDR is supported. #
# reason - Reason to display on disconnection #
# #
# exception lines define a hostmask that is excempt from [kzg]lines #
# #
# host - ident@hostname (wildcards possible) #
# If you specify an IP, CIDR is supported. #
# reason - Reason, shown only in /stats e #
# #
<badip ipmask="69.69.69.69" reason="No porn here thanks.">
<badnick nick="ChanServ" reason="Reserved For Services">
<badnick nick="NickServ" reason="Reserved For Services">
<badnick nick="OperServ" reason="Reserved For Services">
<badnick nick="MemoServ" reason="Reserved For Services">
<badhost host="*@hundredz.n.hundredz.o.1337.kiddies.com" reason="Too many 1337 kiddiots">
<badhost host="*@localhost" reason="No irc from localhost!">
<badhost host="*@172.32.0.0/16" reason="This subnet is bad.">
<exception host="*@ircop.host.com" reason="Opers hostname">
#-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# This optional tag allows you to specify how wide a gline, eline, #
# kline, zline or qline can be before it is forbidden from being #
# set. By setting hostmasks="yes", you can allow all G, K, E lines, #
# no matter how many users the ban would cover. This is not #
# recommended! By setting ipmasks="yes", you can allow all Z lines, #
# no matter how many users these cover too. Needless to say we #
# don't recommend you do this, or, set nickmasks="yes", which will #
# allow any qline. #
# #
# The trigger value indicates how wide any mask will be before it is #
# prevented from being set. The default value is 95.5% if this tag is #
# not defined in your configuration file, meaning that if your #
# network has 1000 users, a gline matching over 955 of them will be #
# prevented from being added. #
# #
# Please note that remote servers (and services) are exempt from #
# these restrictions and expected to enforce their own policies #
# locally! #
# #
<insane hostmasks="no" ipmasks="no" nickmasks="no" trigger="95.5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# You should already know what to do here :) #
<die value="User error. Insert new user and press any key.">
#########################################################################
# #
# - InspIRCd Development Team - #
# http://www.inspircd.org #
# #
#########################################################################
Reference in New Issue View Git Blame Copy Permalink